Black light - Import export

The SUPERfume Tent is a rapidly deployed enclosure for use with portable cyanoacrylate fuming system - SUPERfume. This tent is ideal for the fuming and subsequent examination of cars and small commercial vehicles. The weatherproof tent can be erected on hard or soft ground and once the frame has been expanded and the roof is in place it can be lifted and moved into position causing minimum disturbance to the crime scene. Once in position the side walls are attached to the frame and the fuming process can be initiated. Efficient seals ensure that levels of humidity and cyanoacrylate vapour are maintained at effective levels. Should larger areas be required several frames can be linked together.

Infuse My Colour™ Cobalt Shampoo is a pure ash tone designed to neutralize unwanted red or orange in coloured hair that is Black, dark brown to light brown. Infuse My Colour Cobalt used on bleached or highlighted hair will produce green or blue tones. Do not use on bleached hair unless youe desired tone is blue or green. If your hair is coloured Black Infuse My Colour Cobalt Shampoo will keep it Inky Black If your hair is coloured dark brown Infuse My Colour Cobalt will neutralize red or orange tones If your hair is coloured Light Brown Infuse My Colour Cobalt Shampoo will neutralize orange tones. If your hair is bleached yellow or white or highlighted Infuse My Colour Cobalt Shampoo will add green or blue tones.

DEKS FastFlash Solar Flashing, a flexible flashing for the bottom edge of in roof solar installations. Its a fully adhesive butyl backed flexible flashing used for sealing the bottom edge of in roof solar installations, creating a wind and water tight solution which is easier to apply than many of the OEM solutions. The product stretch enables it to seamless follow the contours of the roof. Available in black, light grey & dark grey in various widths.

Product Features: Primary 120VCA, 50/60 Hz., Secondary 240VAC. Provided circuit isolation. • Torodial transformer for high isolation, low noise, light weight cool operation and low profile. • 50 or 60 Hz. operation, step up (120VAC to 240VAC). • Standard 3-wire, grounded plug (can also be used with adaptors for proper grounding). • Input (primary) connected to a 5 foot cord and standard North American plug (NEMA 5-15P). • Output (Secondary) connected to a standard North American duplex - 3 wire grounded receptacle (NEMA 6-15R). • Transformer Hi-Pot test of 4,000V RMS between primary and secondary. • Features include ventilated black steel case with rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Primary 240VAC, 50/60 Hz., Secondary 120VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operating and low profile. • World wide applications, 50 or 60 Hz. operation, step down (240VAC to 120VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard 250V 2 pole, 3 wire - North American plug (NEMA 6-15P). • Output (Secondary) connected to two standard - 3 wire grounded receptacles (NEMA 5-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Primary 120VAC, 50/60 Hz., Secondary 120VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operation and low profile. • World wide applications, 50 or 60 Hz. operation, step down (120VAC to 120VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard North American plug (NEMA 5-15P). • Output (Secondary) connected to two standard - 3 wire grounded receptacles (NEMA 5-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Available in natural vibra finish OR in light textured, black powder paint. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance. • Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed. • M3.5 x 0.6 x 12mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes. • Designed to meet IP54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available. • All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262.

Product Features: • Ergonomically designed for a comfortable fit into the user's hand. • Choice of two sizes, in two versions (with or without battery door) - in two colours (black or grey). • Perfect for instrument or mobile data enclosures requiring a keypad and display. • Both the display and keyboard areas are recessed for membrane devices. • Moulded from flame retardant ABS plastic, choice of black or light grey - material carries a UL flammability rating of 94V-0. • Handheld section of enclosure includes a dark grey overmould, soft plastic grip. • Enclosure is assembled with M3-0.5 x 18mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Integral brass bushings are factory inserted into top half of the enclosure. • Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54.

Product Features: • Ergonomically designed for hand-held comfort. • Designed to meet Ip65. • Uses a one piece silicone gasket (installed). Enclosure utilized tongue and groove construction - moulded into the top and bottom halves. • Choice of three sizes - in two colours. • Moulded in flame retardant - ABS plastic (FRABS) - UV stabilized. With a grey overmould, soft plastic grip. • Top cover is recessed for membrane display or keypad. • P.C. board standoffs are moulded into both the top and bottom of the enclosure. Standoff screws (M2) are not included. • Front panel is an integral part of the top half of the enclosure. • Choice of two enclosure colours, light grey or black - soft side "grip" plastic colour is grey. • Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.

We source and supply Wenge Wood from well-managed forests. Commercial Name: Wenge Scientific Name: Millettia laurenti Origin: West & Central Africa Description: Wood yellow when fresh, becoming dark brown to black-brown with light. End-Uses: furniture production, decorative veneers, and speciality items, etc. Available in Sawn Timber: YES Available in Round Logs: NO Timber Quality: FAS/AD Minimum Order: 20ft Container Dimensions: Timber will be produced according to your inquiry (you tell us the sizes and qualities you need) and we are doing all the rest For more information and quotation: Please Contact Us