Bar steel- stainless - Import export

Base material for cold drawing is ASTM A276. UNS S32760 F55 solution annealed material that complies with Condition A. After cold drawing (strain hardening) material meets ASTM A276, UNS 32760 F55 Condition S. Material that meets required impact test requirements will be further designated as variant 'FG', 'FLT', or 'FLT+'

ASMS659 is a corrosion resistant steel. We hold this grade in round bar form in both the solution treated condition (Condition A) and in the H1025 precipitation treated (aged) condition. The material is typically used for part s requiring corrosion resistance and high strength up to 300oC. The material exhibits good ductility and strength in the transverse direction in large section sizes SIZES STOCKED: Condition A – 9.5 mm dia – 152.4 mm dia H1025 condition – 12.7 mm dia – 152.4 mm dia

13-8 Mo VIM-VAR steel is a precipitation hardening martensitic stainless steel/ It offers excellent strength, fracture toughness and transverse mechanical properties. The material is resistant to stress, corrosion cracking and has the high strength characteristics common to the family of precipitation hardening steels. The alloy is double vacuum remelted (VIM-VAR) which assures low gas content, improved homogeneity and superior cleanliness

To complement our range of stainless steel tube, we stock a variety of stainless steel bar products in grades 303 (1.4305), 304 (1.4301) or 316 (1.4401). Our close relationships with some of the largest bar producers in the world allows us to meet any quantity requirement. In addition, we stock a range of 1.4404 produced to NACE and various other grades such as 17-4PH and Duplex for use in the oil and gas sector. Due to growing demand, we offer cut billets (pieces) from 10mm thick. These pieces are produced on-site on a cut-to-order basis. Have you tried our Sawn Block products? Manufactured from Stainless Steel Round Bar, it has been praised as a high-quality yet cost-effective alternative to metal plate.

Interchange Data: • European High-Flow Interchange • 1/4” interchanges with Coilhose Megaflow, CEJN 320, and Rectus 25KA/26KA • 3/8” interchanges with Rectus 27KA and Series 410 Materials: • Machined components are manufactured using solid Steel or Brass bar stock • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance and extend service life • Steel componentry is plated using ROHS Compliant Trivalent Chrome. • 3/8” and 1/2” couplers constructed of Steel as standard with Steel tubular valves Seal Components: • Nitrile (Buna-N) pneumatically energised seals are standard, providing a temperature range of -40°C to +121°C (-40°F to +250°F)

Interchange Data: • Trufl ate Automotive interchange style • Parker 10-Series • Rectus 55KM • Tomco A2100/PT400 Materials: • Machined components are manufactured using solid Steel or Brass bar stock • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance and extend service life • Steel componentry is plated using ROHS Compliant Trivalent Chrome • 1/4” couplers constructed of Brass with Steel sleeve and Steel tubular valve as standard • 3/8” and 1/2” couplers constructed of Steel as standard with Steel tubular valves Seal Components: • Nitrile (Buna-N) seals are standard providing a temperature range of -40°C to +121°C (-40°F to +250°F)

Interchange Data: • Parker 20-Series Manual Interchange (F-Series) • Parker 30-Series Automatic Interchange (D-Series) • Foster 3, 4, 5, and 6 Series • Hansen 1000, 400, 500 (F-Series) • Hansen 3000, 4000, 5000, 6000 (D-Series) Materials: • Machined components are manufactured using solid Steel, Brass, or 303 Stainless Steel bar stock • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance and extend service life • Steel componentry is plated using ROHS Compliant Trivalent Chrome • Automatic couplers constructed of Brass with Steel tubular valve as standard (3/8” to 3/4” couplers have Steel prong valves) • 1/4” manual couplers constructed of Brass with Steel sleeve and Steel tubular valve as standard • 3/8” and 1/2” manual couplers constructed of Steel as standard with Steel tubular valve. Seal Components: • Nitrile (Buna-N) seals are standard, providing a temperature range of -40°C to +121°C (-40°F to +250°F)

Interchange Data: • Straight-Through Pressure-Wash Interchange • Parker ST-Series, Foster FST-Series, Tomco Series-ST, Hansen ST-Series Materials: • Machined components are manufactured using solid Steel, Brass, or 303 Stainless Steel bar stock. • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance and extend service life. • Steel componentry is plated using ROHS Compliant Trivalent Chrome. • 1¼” to 2” Brass couplers have Steel sleeves as standard to maximise service life, hardened to resist deformation. • Steel nipples are hardened to provide heavy duty performance. Seal Components: • Nitrile (Buna-N) seals are standard, providing a temperature range of -40°C to +121°C (-40°F to +250°F)

Interchange Data: • Interchangeable to MIL-C-51234 • Snap-Tite H/IH and Faster TNV/TNL Materials: • Machined components are manufactured using solid Steel, Brass, or 316 Stainless Steel bar stock • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance and extend service life • Steel componentry is plated using ROHS Compliant Trivalent Chrome • Steel coupler sleeves are hardened to resist deformation and maximise service life • Steel nipples are machined from high-strength Steel and induction hardened • Tubular ‘TV’ valves are constructed from Steel bar stock and are designed for optimum performance in pneumatic applications Seal Components: • Nitrile (Buna-N) seals are standard, providing a temperature range of -40°C to +121°C (-40°F to +250°F) • All couplers incorporate a PTFE anti-extrusion ring to protect the seal components from dynamic impulse damage • ¼” to 1” valve seals are crimped in place to maintain integrity during excessive flow conditions and

Interchange Data: • Interchangeable to ISO15171-1 • Parker PD-Series, Aeroquip FD90, Tomco Series DK Materials: • Machined components are manufactured using solid Steel bar stock • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance and extend service life • Steel nipples are machined from solid Steel bar stock and hardened • Steel componentry is plated using ROHS Compliant Trivalent Chrome Seal Components: • Nitrile (Buna-N) seals are standard, providing a temperature range of -40°C to +121°C (-40°F to +250°F) • PTFE anti-extrusion ring protects main coupler O-Ring from dynamic impulse pressure damage

Interchange Data: • Interchangeable to ISO16028 • Parker FEM-Series, Snap-Tite 74-Series, Hansen FF, Aeroquip/Eaton FD89, Stucchi FIRG/Series ‘A’, • Faster FFN/FFI/2FFN/2FFI, Safeway FF49-Series Seal Components: • 3/8”, 1/2”, and 3/4” nipples have molded Polyurethane valve seals,with a temperature range of -54°C to +100°C (-65°F to +212°F) • 1/4”, 5/8” and 1” to 2” nipples have Nitrile-Energised PTFE valve seals, with a temperature range of -40°C to +121°C (-40°F to +250°F) • Couplers have a polyurethane valve stem O-Ring, with a temperature range of -54°C to +100°C (-65°F to +212°F) • Ancillary coupler and nipple seals are Nitrile (Buna-N), temperature range of -40°C to +121°C (-40°F to +250°F) • PTFE or TPC-ET Anti-Extrusion ring protects main coupling valve seal from dynamic impulse pressure damage Materials: • Machined components are manufactured using solid Steel or 316 Stainless Steel bar stock • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance a

Interchange Data: • Bowes Interchange Bayonet Style • Interchangeable with Bowes 51000-Series, National Series ‘B’, Dixon Dixlock, MacDonald Quick-Action, Adlock Materials: • Machined components are manufactured using solid Steel, Brass, or 303 Stainless Steel bar stock • Phosphor Bronze retaining ring and spring maximise corrosion resistance and extend service life • Steel componentry is plated using ROHS Compliant Trivalent Chrome • Dust cap bead chain constructed of Stainless Steel Seal Components: • Nitrile (Buna-N) pneumatically energised seals are standard, temperature range -40°C to +121°C (-40°F to +250°F)

Interchange Data: • High Pressure Screw-Together Interchange • Parker/Pioneer 3000-Series, Enerpac C604, Stucchi IVHP • Hansen WS56000, Snap-Tite 76-Series, DNP PVM Materials: • Machined components are manufactured using solid Steel or 316 Stainless Steel bar stock • Chrome Steel ball valve is mechanically seated to improve low pressure sealing performance • Steel nipples are machined from solid high strength Steel bar stock • Steel componentry is plated using ROHS Compliant Trivalent Chrome Seal Components: • Urethane seal is standard in ball valve couplers and provides resistance to extrusion when subjected to high pressure - temperature range -40°C to +82°C (-40°F to +180°F) • Nitrile seals are standard in poppet valve couplings, providing a temperature range of -40°C to +121°C (-40°F to +250°F)

Interchange Data: • Interchangeable with Snap-Tite 71-Series Materials: • Machined components are manufactured using solid Steel or 316 stainless bar stock. • Stainless Steel balls, retaining rings, and springs maximise corrosion resistance and extend service life. • Steel componentry is plated using ROHS Compliant Trivalent Chrome. • Steel coupler sleeves are hardened to resist deformation and maximise service life. • Steel nipples are hardened to provide heavy duty performance. Seal Components: • Nitrile (Buna-N) seals are standard, providing a temperature range of -40°C to +121°C (-40°F to +250°F). • All couplers and nipples incorporate PTFE or TPC-ET anti-extrusion rings to protect the seal components from dynamic impulse damage.

Sizes: 63 mm & 80mm Dial diameter and 100 mm (4”) & 150mm (6") Mounting: Direct, Surface and Flush Case & Bezel: Full Safety Pattern case to S3 standard and Die Cast Scale Ranges: 0 to 600 mbar to 0 to 1400 bar, 0 to 400 mBar up to 0 to 1400 Bar Pressure Element: ≤80 Bar for 316 Stainless Steel Bourdon Tube and ≥81 Bar for 316 Stainless Steel Coil Overload: Up to 130% of FSD Pressure Connection in 316 Stainless Steel: 3/8”, 1/2” BSP and 1/2" NPT Accuracy Class: 1% of FSD (CL1) as defined in EN837-1 (Options available) Operating Temperature: -20 to +90 ºC operating Dial: White Anodised Aluminium marked in black finish Pointer: Stainless steel coloured black Movement: Stainless Steel Construction Window: 3mm Laminated Safety Glass (Standard) Environmental Rating: IP67 as defined in EN 60 529 Traceability: Calibrated with unique Serial Number printed on the dial Certification: BS EN 10204 3.

Professional equipment for Food Truck! cooked smoke extraction cooking chips creperie crepe maker snack plate snacker hood pizza pizzeria restaurant rotisserie restaurant chip shop ice cream shop Greek Turkish Turkish kebab for your takeaway Decorative and hygienic aluminum plate covering. 304 L food-grade stainless steel sheet wall cladding wall protection anti shock plate kitchen equipment chr food-truck ribbed aluminum anti-slip floor positive and negative cabinet glass rear bar glass cabinet stainless steel cabinet stainless steel hood showcase Counter charcoal grill dimmer ventilation turret activated carbon box workplan gas or electric stove waffle iron anti-slip floor gastro tray plancha gastro tray glazed refrigerated kit freezer freezer slicer meat grinder buffet hand shower sink open and closed wall cupboard trash can panini grill smokehouse Don't hesitate to contact us for more information or for custom order. MARCHANDISE PRO

Virabact RED kills SARS-CoV-2 (Covid-19) in just 60 seconds. Virabact products are liquid cleaners formulated with powerful bactericides and antiviral ingredients for use in cleaning and sanitizing. They provide quick and easy cleaning and sanitizing for a wide variety of applications, including all food preparation surfaces. May be used to clean and disinfect all hard surfaces including worktops, salad bars, microwaves, stainless steel surfaces, canopies, fridges, freezers and chopping boards. Contains no perfumes so is non-tainting and therefore food safe, making it ideal for cleaning of food preparation areas and areas involved in the processing of meats, cream and other foods that may carry a high risk of bactericidal contamination. Conforms to EN1276, EN14476 (enveloped viruses) EN1650, EN13697 (bacteria and yeast). This product has not been tested on animals

Rolled stainless steel is intended for the production of visible and durable buildings, parts and goods. Stainless steel is especially popular in everyday life, construction, mechanical engineering and medicine. Rolled stainless steel has the form Matte; Polished; Mirror. Depending on the requirements and place for the installation of stainless steel, a selection of its type is made. Stainless steel is resistant to aggressive environments and, if used correctly, is a durable material, because it is no secret that products made of this metal, just like gold, are passed from generation to generation. According to the method of appointment, stainless steel can be used both for food, for example, steel 08X18H10, and for non food products. Stainless steel is produced at factories in our country (according to GOST) and abroad (according to DIN). Stainless steel sheet DIN EN 10088 2 (strip) is intended for the production of children's playgrounds

We've been creating worktops for years and with all of that experience comes the ability to develop our processes ensuring that you're getting the perfect product.

Alloy 17-4 PH is a chromium-copper precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. 17-4PH Stainless Steel combines high strength, hardness (up to 572°F / 300°C), and moderate corrosion resistance. Alloy 17-4 PH withstands corrosive attacks better than any of the standard hardenable stainless steels and is comparable to Alloy 304 in most media. The alloy is subject to crevice or pitting attack if exposed to stagnant seawater for any length of time, although it is corrosion resistant in some chemical, petroleum, paper, dairy and food processing industries(equivalent to 304L grade). Mechanical properties can be improved (high strength and superior corrosion resistance) when precipitation hardened from Condition A to one of the Condition H tempers. We supply 17-4 PH in the H1150D condition. This is double aged at a temperature between 1140° F and 1160° F for 3.75 hours to 4.