Aire - Import export

The 360° air intake draws in the unclean air, through the H13 HEPA filtration. It removes viruses and bacteria from the air to stop concentrated pollutants from staying airborne. The ap360 reduces virus and bacteria in the air using UVC lights that destroys bacteria and viruses by damaging the DNA and RNA. Viruses and bacteria are subsequently unable to replicate and are therefore not infectious. The ap360 is designed to help combat airborne pathogens that include viruses from indoor environments.

The next generation in air purification, made for medical settings and businesses. The ap360 kills 99.95% of known viruses and will recycle the air in a 90m3 room four times in an hour, maximising air quality and combating the risks of dangerous pathogens. Controlled airflow to create clean air in more enclosed spaces H13 HEPA filter with UVC lamps captures and destroys 99.95% of viruses and bacteria Ozone free and low power usage for sustainability and cost efficiency Laboratories, dentists, doctors, ophthalmologists, chiropodists, care homes, hair salons, beauty salons, universities, schools, offices, hotels and much more. Innovative design with 360° air intake. The ap360 is designed to create clean air in more enclosed spaces, together with optimal efficiency. The air intake system consists of several concentric ducts to extract air in different directions quickly and efficiently. Smooth three speed fan pushes air through a HEPA 13 filter for 360m3/hour air processing

Vscan Air is a battery-operated general-purpose diagnostic ultrasound imaging system for use by qualified and trained veterinary professionals. Vscan Air consists of a dual-headed probe, which integrates both curved and linear array transducers. The Vscan Air probe comfortably fits in the palm of your hand and is almost as light as a smartphone. You can carry it in your pocket all day and take it wherever you go and the simplified user interface enables integration into training sessions and examinations suitable for both in practice and field environments.

Use as standard Dektite®, or when retrofit is required, cut and fit around pipe and join with clips (supplied) Ideal for HVAC installations where you may need to retrofit the flashing (ie cut to fit over the pipe and reseal) This product is 2 in 1, the Swiss Army Knife of HVAC flashings - Available to cover sizes up to 760mm pipe diameter. Available in Black & Grey EPDM and Red High Temperature Silicone.

Pure A100 allows for non-contamination when working with high tempuratures 356-T6 Alloy perfect for heavy work, more durable Abbott aluminium hammers are the perfect alternative to lead, brass and plastic tipped hammers. Single piece cast construction gives maximum solidity and guarantees safety because head cannot separate from handle. The hammers are non-sparking, non-marring and have excellent vibration dampening characteristics that allow the handle to absorb impact forces instead of your hand.

Our range of sterile gas filters includes two types of sterile gas filter - PTFE membrane or GF depth media's - and also includes a range of coalescing prefilters that ensure the maximum protection of the final sterile filter. All are designed with minimum operating differential pressure in mind to minimise running costs and to optimise filter service life.

Folknoll warden call systems enable residents, visitors and staff to obtain assistance in the event of emergency or other contingency. They may also be used warn staff when associated alarms are activated e.g. door exit, water level, smoke. If appropriate, door entry intercom with remote door release can be incorporated into staff and lower dependency speech units. For those times when your site has no local staff available our systems can be configured to report alarms and other events to remote sites.

The GLS 300C suit in Chemprotex™ 300 is a single use air-fed gas-tight chemical protection suit for use with breathable air supplied from an external compressed air source providing positive pressure. The suit combines the benefits of a lightweight high-performance chemical barrier fabric with a gas-tight construction to method 2 of ISO 17491-1. It incorporates permanently attached antistatic chemical gloves, sock feet and a lightweight gas-tight zip.

BECO GLOBAL is a worldwide consultancy, shipping and freight forwarding company focusing on international trade, commodity movement globally with entry compliance to all destinations around the world. We are the UK’s one stop shop for independent and impartial, shipping, customs clearing agents and freight forwarders. To date, we provide the following services tailored to a range of traders, importers, exporters, manufacturers, sales agents to individual with shipping needs in moving their commodities globally across various sectors: • Freight forwarding • Customs clearance • Sea Freight (RORO, LCL and FCL container shipping) • Air freight • Road freight • Rail freight • Warehousing • Packaging • Supply chain management • Consultancy. We guarantee to meet your needs and exceed your expectations by delivering an enhanced range of shipping logistics processes with value for money services at both place of origin and final destinations.

BECO GLOBAL provides fast, compliant, flexible and reliable airfreight solutions, to and from wherever your destination or whenever deadline might be. With UK London Heathrow, London city and London Gatwick badges, we have representatives at air cargo hubs to ensure delivery of all sizes of cargo to from the UK and Europe as well as the rest of the world. As an IATA cargo agent, our extensive shipping and logistics experience ensures we cater for all your requirements when it comes to airfreight, including: collection and delivery door to airport airport to airport airport to door complete end to end services in air transport and advice on best route and fastest transit. We offer a range of different options tailored to your needs, budget and specified deadlines.

A reusable Type 2 ‘non-gas-tight’ chemical protective suit designed for use with breathable air supplied from an external compressed air source providing positive pressure.

The waveguide dehydrator is a crucial element of any communications waveguide system, be it a microwave, radar, TV satellite terrestrial or antenna system. This high-capacity waveguide dehydrator for location in both ETSI and standard 19” racks, has reversible mounting brackets allowing the same unit to fit within either enclosure without any further need for mounting brackets or plates. Whether you choose the 230vAC or the 48vDC variant, the 12446 boasts an impressive output of over 220 litres per hour at an excellent dewpoint of -40ºC. The unit comes with 2 fixed output pressure options of either 15 or 40 mbar, and 6 off ¼” pneumatic outlets as standard. Despite its physical dimensions, the 12446 houses a high capacity, high pressure air storage vessel which allows the unit to remain inactive for extended periods of time, keeping maintenance requirements to an absolute minimum. Dry air delivery: 8 ft3/hr Dry air dew point -40c Output pressure 0.2 – 6 psi

Closely matched with the performance and specifications of our accomplished 19” rack-mounting waveguide dehydrators, the 12445 series Waveguide Dehydrator is intended to offer our customers a range of space-saving wall-mounting alternatives. Now available with 3 levels of performance, the 12445 range suits many applications. Protruding only 16cm or 23cm from a wall, and mounting via integral keyhole slots, these units dispense with any need for additional shelving or brackets. In addition to the exceptional performance now associated with Drallim Waveguide Dehydrators, in this case between 5 and 35 cubic feet per hour output, the 12445s are loaded with features, including the following: Integral air reservoir Adjustable output pressure regulator Output flow meter Humidity detection equipment Excessive run-time alarm Remote alarm monitoring terminal Digital runtime display High and low output pressure alarms

Twin duct air conditioner heat pump. 2.3kW and 3.1kW. The vision requires no external condenser. Saves costs on installation. Wifi control. Improves the aesthetic appearance of your building

Powrmatic CPx 360kW Gas Fired Cabinet. Upright. Horizontal and External Cabinet Heaters also available

Powrmatic CECx Destratification fan

Powrmatic SRP U-Tube Radiant heater

In addition to a proper ventilation system, UV-FLOW germicidal ultraviolet (GUV) light fixtures inactivate microbes in an area’s upper environment, helping to prevent the spread of any airborne infection. Thanks to its unique design it is safe to operate 24/7 in occupied and crowded spaces. 4 highly efficient selective UV-C pure quartz lamps at 253.7 nm. • Pure mirror bright aluminium parabolic reflector • 360 Degree Beam Pattern • All materials used are tested to resist intense UVC radiation • Specific electronic ballast for UV-C ray lamps • Protected against dust and water (IP55) • CE trademark (LVD 73/23 – EMC 89/336 – MD 93/42) • Complies with the noise standards of Directive 2006/42/EC • Values measured according to UNI EN ISO 3746 • Non-detectable and non-transmissible vibration values • Suitable for class 1 installations – protected areas

Air Punches for thermoforming machines are available from stock, compatible with Multivac, Tiromat/CFS/GEA, ULMA, Veripack and other machines, we’re almost certain we’ll know and recognise the part you need. Manufactured from high-grade Stainless Steel 440, we guarantee to offer a product that will match the OEM alternative. Contact us today for further information.

1200i PRO is a Medical Grade Air Purifier with a Clean Air Delivery Rate of 1200 m3/h. 1200i PRO combines the most advanced 4-stage filtration technology currently available on the market. Medical-grade H13 HEPA NANO filters remove 99.97% of malicious particles from the air providing safe environments for both business and leisure. High efficiency in killing viruses (ie. Coronavirus) and bacteria, effective in removing unpleasant odours are ensured by the implementation of multiple filtering systems. 1200i PRO is an outstanding air purifier designed entirely for the comfort and health of you, your customers, your patients and your employees.

720i EDGE is a Medical Grade Air Purifier with a Clean Air Delivery Rate of 720 m3/h. 720i EDGE combines the most advanced 5-stage filtration technology currently available on the market. Medical-grade H13 HEPA NANO filters remove 99.97% of malicious particles from the air providing safe environments for both business and leisure. High efficiency in killing viruses (ie. Coronavirus) and bacteria, effective in removing unpleasant odours are ensured by the implementation of multiple filtering systems. 720i EDGE is an outstanding air purifier designed entirely for the comfort and health of you, your customers, your patients and your employees.

Duct sanitization system that reduces the microbial load in the air and on surfaces, using tested and certified Bioxigen® technology. Air ducts, and in particular the most critical sections (bends, changes in direction, corners, etc.) are susceptible to accumulation of dust, stagnant moisture, condensate and mucilage that create the perfect conditions for biofilm to form. The consequence is the spread of bacterial colonies and the formation of Legionella. Bioxair guarantees benefits for people, by reducing the risk of contagion due to the spread of bacteria, and the environments, by limiting the growth of mould on walls and ceilings. Planned for an easy installation in new or already existing air ducts. Air treatment capacity up to 25.000 m3/h

Please refer to our website for the various specifications and documentation https://afcvalves.co.uk/products/#air-release

UV-FAN Air Purifier is an air purification device of a stylish structure in extruded aluminium, coated by epoxy powder finish and lacquered aluminium. A quiet internal fan draws air from the positioned room zone into the germicidal box for disinfection and purification from microbes and chemical contaminants. The internal germicidal box contains two UV-C lamps housed in a mirror-polished aluminium airflow chamber in which to improve the germicidal power of the lamps by reflection. Air is sanitized by a labyrinth effect, passing across the 254nm UV-C lamps. Clean air is then introduced back into the environment, without contaminants. Inside the box there are two TiO2 filters; (TiO2 stands for nanostructured titanium dioxide), this is a powerful photo-catalyst as the reaction generated degrades organic and inorganic pollutants including the membranes of pathogenic micro-organisms. TiO2 enhances the effect of UV-C light; with its photocatalyzed effect actively targeting the elimination o

Ideal for a wide range of applications when precise measurement, control and continuous monitoring of trace moisture is required. Utilising the SHAW sensor, to maintain signal integrity over distances up to 1,000 metres. Superdew 3 includes a fully controllable, linear, 4-20 mA output, RS485 communications, two programmable alarm relays and a universal power supply. Incorporating the unique AutoCal function, which allows the sensor to be brought back into equilibrium without the need for any special equipment, thereby reducing downtime, minimising calibration costs and obtaining immediate verification of the dew point system and allowing users to maintain optimum measurement accuracy between laborartory calibrations. Superdew 3 also includes RS485 capabilities, enabling the user to set the instrument's address and communication baud rate used when it is communicating with a PC using RS485 point-to-point communications.

Filters play a vital role in heating, ventilation and air conditioning systems within the ducting. When airborne pollutants enter the duct they pass through the the filter which allows for the air to continue to pass through but traps the microscopic particles and does not allow them to pass back into the the building when the air is recycled.

AJS supply the highest quality fittings and fixtures needed to complete a full heating, ventilation and air conditioning system. All products are supplied are manufactured by reputable companies who we have built a solid working relationship with and are safe in the knowledge that all products supplied by AJS will be safe and meet all specifications set by regulations such as HVAC DW144. Duct fixtures and fittings stocked include spiral tubing T & Y pieces, bends, branch saddles, cap ends, flanges and couplers to manage the air flow through the ducting and connecting elements of ducting systems.

A J Services manufacture a range of access doors which has been designed in order to gain safe access to to ducting for the inspection of elements and routine cleaning. The access doors are manufactured in galvanised steel but can also be made in 304 & 316 stainless steel as well as aluminium ranging in size from 50mm to 2000mm and produced in a variety of styles: tabbed, flat oval, spiral/circular and pressed access doors. All with a depth of either 25 or 50mm depth and can include additional safety features such as chains.

AJS supply a large range of dampers differing in style which provide varying safety features in ductwork systems which are connected to heating, ventilation and air conditioning systems from fire safety to regulating the air flow. There are various different styles of damper which can be used for different styles of application dampers include butterfly, non return, fire, smoke, constant and blast gate plus many more. Dampers are available with various different safety features.