Results for
DANA LUBRICANTS FACTORY LLC
United Arab Emirates
DANA LUBES Gear Oil 80W90 is high performance, heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for automotive applications including heavy duty axles and final drives where extreme pressures and shock loading are expected.It provide excellent performance where API GL-5 service is required. Applications : * Heavy duty axles and final drives requiring API GL5 level performance * Cars, on highway light and heavy duty trucks and commercial vehicles * Off highway industries including: construction, mining, quarrying, and agriculture * Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail Available packing :- 1ltr,4ltr,5ltr,20ltr,25ltr,208ltr,1000 ltr All our Oils are Manufactured in our State of Art Facilities in UAE ( www.danalubes.com) and exported worldwide .
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
DANA Lithium Multipurpose Grease MP2 DANA Lithium Multipurpose Grease are premium quality multipurpose greases for use in all anti-friction and plain bearings subjected to high shock load and vibration conditions. They are used extensively for applications throughout industry and the automotive sector. Applications : It is suitable for lubricating rolling bearing, sliding bearing ,wheel bearing and chassis lubrication and other friction points of general mechanical equipment.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
DANA LUBES based in UAE is a leading manufacturer of high quality Industrial Hydraulic Lubricants & Oils. Hydraulic Oil ISO 46 gives wide temperature range performance. Their exceptional anti-wear, lubricity and film strength characteristics assure performance in hydraulic and circulation systems operating under moderate to severe conditions. The ready biodegradability and virtually non-toxic nature of this products makes it an excellent choice where leakage or spillage could enter environmentally sensitive areas. The inadvertent leakage of spillage of this product in environmentally sensitive areas could result in easily clean up and lower remediation costs.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
ATF Dexron III is an automatic transmission and power steering fluid. automatic transmission fluid based on an advanced synthetic technology allowing very high performance needed for the demanding requirements of passenger cars automatic gearboxes. Used in a broad range of automatic transmission standards (Asian, European, American...). Particularly suitable for 4 and 5 speeds automatic transmissions. Saient Features of DANA LUBES ATF DEXIII Increased resistance to oil oxidation and degradation. Enhanced friction durability prolongs transmission life and promotes smooth shifting. Increased clutch band and clutch pack capacity. Advance protection of copper and bronze components. Available in Packing :- 1ltr,4ltr,5ltr,20ltr,25ltr,208lltr,1000 ltr.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
DANA LUBES 4T SAE20W50 API SL JASO MA Semi Synthetic Motorcycle Engine Oil is specially formulated to meet and exceed the requirements of leading motorbike manufacturers across the globe. Vast majority of modern motorcycles use the same oil to lubricate the engine, transmission, and the clutch. Motor oil lubricates moving parts by covering these parts with a slick film. Oil’s ability of resistance to flow is called viscosity. When motor oil is cooled, the viscosity of the oil is thick and is capable of producing a friction-resistant coating on surfaces. As internal engine temperature rises, the viscosity thins out, allowing the oil to flow better, but reduces the tendency to adhere to the parts. The viscosity index measures the performance of an oil’s viscosity changes as engine temperatures change. A higher viscosity index indicates that the rating of the oil’s viscosity, changing less in high-temperature situations than a lower viscosity indexed oil.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Hydraulic Oil is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided. Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Base Oil SN 900 is defined as a base oil at the upper end of the specifications for Grade I base oils. It is used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base oil SN 900 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Base oil SN 600 is defined as a base oil at the upper end of the specifications for Grade I base oils. It is generally used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : SN 600 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Base Oil SN 300 is a defined as a light grade base oil and is a Grade I base oils. It is generally used in lubricant and lubricant additives production. It has been solvent refined and hydrogen treated to take out impurities. Applications : Base oil SN 300 works as a base stock for several industrial lubricants General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils Features : In order to ensure its purity, it has been solvent refined, dewaxed and hydrogen treated oil. It has long shelf life High thermal Stability Free from harmful chemicals. Used in mould oil, transmission fluids, gear oils, metal working fluids and additives.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Base oil SN 150 is known as a light grade base oil at the lower end of the specifications for Grade I light base oils. It is mostly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base oil SN 150 works as a base stock for several industrial lubricants. General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Base Oil SN 100 SN100 is a light base oil with its parameters being at the low end for lubricant stock. It is a Group I base oil made by further processing vacuum distillates of specific crude oil fractions. It is mostly used in lubricant and lubricant additives production. Applications : Base oil SN 100 works as a base stock for several industrial lubricants General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Refrigeration Oils are developed for refrigeration compressors and systems requiring ozone friendly HFC refrigerants. These Environmental Awareness Lubricants are developed to give: Excellent evaporator cleanliness. Less compressor wear. Low temperature fluidity. High system efficiency and proper oil return in refrigeration system designs. Applications : Refrigeration Oils are hygroscopic and care must be taken to avoid moisture absorption during handling. Packages should be closed properly when not in use, and small packaging should be preferred. Product should not be transferred to plastic containers that can allow moisture ingress. Applications include: Household refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Industrial applications such as food preparation and freezing, as well as cryogenic applications. Commercial refrigeration applications such as business, mall and hotel air conditioning, and low temperature transportation.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Anti Freeze 50% is a ready to use phosphate free, silicate-free, nitrite free and borate free ethylene glycol base coolant that is designed to give exceptional wet sleeve liner cavitation and corrosion protection of all cooling system metals. This is a pre diluted Antifreeze is developed with organic corrosion inhibitors to give total cooling system protection for 1,000,000 miles of on – road use. Applications : Antifreeze is recommended for use in: It is use in heavy duty diesel, gasoline and natural gas engines. Stationary engine applications regardless of fuel type being used. Marine cooling systems where freeze protection is necessary. Mixed fleets where both light duty and heavy duty trucks are present. Features and Advantages : Long service life: 1,000,000 miles of on road use. This is designed for use in engines running EGR, SCR and ACERT technologies that can extend cooling system temperatures. .
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
DANA Antifreeze is a high performance concentrated antifreeze formula that needs to be diluted before use. Applications : Antifreeze is recommended for use in applications requiring BS6580 – 1992 quality standard.Antifreeze must be diluted with water before use. It is hard water compatible and it can be mixed with tap water before filling into the cooling system. Water Specifications Hardness, °dGH (mmol/l) 0 – 20 (0 – 3.6) Chloride Content, ppm max 100 Sulphate Content, ppm max 100 Dilution Table Antifreeze Water Freeze protection 33 % 67 % -18°C 50 % 50 % -36°C 60 % 40 % -52°C Features and Advantages : Antifreeze holds Mono Ethylene Glycol and avert winter freezing and summer overheating over a 2 years period. Specifications : Antifreeze is recommended for use in applications requiring the following specification: BS6580-1992
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Brake Fluid DOT 4 is a high performance hydraulic brake fluid. It is mainly use in automotive disc, drum and anti-skid brake systems and clutch systems. Applications : Brake Fluid DOT 4 is recommended for use in applications requiring disc, drum and anti skid braking systems used in average to high performance vehicles requiring DOT 4 level performance. Brake Fluid Dot 4 use only in its concentrated form out of a unopened or well sealed container Seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this can reduce service life. Do not reuse drained brake fluid. Brake fluid can affect the vehicles paint, so remove spills without rubbing. Brake fluid should be drained from the vehicle every two years or 40,000 Kms. Features and Advantages : Features Advantages High boiling point It is consistent and safe brake performance under high braking pressure
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Brake Fluid DOT 3 is a excellent performance hydraulic brake fluid. It is use in automotive disc, drum and anti skid brake systems and clutch systems. Typical properties vary depending on the supplier of the fluid. Typical properties for brake fluids include: Density at 20º C, boiling point, wet boiling point, flash point and viscosity at 40º and 100º C. Applications : Brake fluid dot 3 is developed for use in applications where disc, drum and anti-skid braking systems are used in vehicles requiring DOT 3 level performance. Use only in its concentrated form out of a previously unopened or well sealed container. Seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this can reduce service life significantly. Do not reuse drained brake fluid. Brake fluid can affect the vehicle paintwork, so remove spills without rubbing. Brake fluid should be drained from the vehicle every two years or after 40,000 Kms.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DANA LUBRICANTS FACTORY LLC
United Arab Emirates
Calcium Grease Multipurpose MP2 is a quality, smooth, calcium soap based grease and is fortified with the best known natural solid lubricant, graphite. Manufactured to NLGI 2 consistency, this grease gives the best combination of performance and economy for most applications. Calcium Grease is resistant to water and have excellent mechanical stability. The use of this grease will reduce wear through the use of the solid lubricant and gives extended lubricant coverage due to even distribution of the product along the wearing parts. Application : This grease is recommended for flexible couplings in various industrial applications where incidental water contact is high. Benefits : Keeps excellent shear stability under heavy duty service. Good water tolerance and is adaptable to normal grease dispensing systems including centralised lubrication systems.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
ATF Dexron III is an automatic transmission and power steering fluid. It is recommended for use in General Motors automatic transmissions pre 2005 and in other automatic transmissions where Dexron (II or III) or Mercon performance is required. Applications : ATF Dexron III is recommended for many transmissions used in General Motors cars, Holden, Isuzu, Opel and Hydramatic transmissions used in a wide range of vehicles. It is also good for many earlier model Japanese vehicles where Dexron type fluids are recommended. It is recommended for other transmissions where Dexron and Dexron II fluids are specified except Mercedes Benz, ZF, BMW, Voith and Renk. Specifications : Dexron III H, IID and II. It can also good for use where the following performance levels are specified Holden HN 2126 Mazda M III Fluid Ford Mercon IV Allison C4 Ford M2C-138CJ GM Type A Suffix A
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
ATF Dexron I is a multi-vehicle, fully synthetic automatic transmission fluid that outperforms conventional automatic transmission fluids and offers exceptional thermal stability. ATF Dexron I is designed to meet the demanding requirements of modern passenger vehicles. Applications : ATF Dexron I is a multi vehicle formula developed for use in modern high performance automobiles, SUV’s, SUT’s, vans and other light trucks. It is recommended for use in applications requiring Dexron III , Ford Mercon and Mercon V performance levels This is developed for use in applications specifying the off highway power transmission requirements of Allison C-4. Specifications : ATF Dexron I meets the requirements of: JASO 1-A Ford Mercon V Features and Advantages : Features Advantages and Potential Benefits Enhanced, long-term frictional properties Improve and extend transmission efficiency, smooth shifting performance and fuel economy
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Gear Oil 85W140 is high performance, heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for automotive applications including heavy duty axles and final drives where extreme pressures and shock loading are expected.It provide excellent performance where API GL-5 service is required. Applications : Heavy duty axles and final drives requiring API GL5 level performance Cars, on highway light and heavy duty trucks and commercial vehicles Off highway industries including: construction, mining, quarrying, and agriculture Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail Specifications : Gear Oil 80W140 meets the following industry specification: 80W140 API GL-5 X
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Gear Oil 80W90 is high performance, heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for automotive applications including heavy duty axles and final drives where extreme pressures and shock loading are expected.It provide excellent performance where API GL-5 service is required. Applications : Heavy duty axles and final drives requiring API GL5 level performance Cars, on highway light and heavy duty trucks and commercial vehicles Off highway industries including: construction, mining, quarrying, and agriculture Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail Specifications : Gear Oil 80W90 meets the following industry specification: 80W-90 API GL-5 X
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Gear Oil SAE 140 API GL-4 & GL-5 is a lubricating gear oil for mechanical transmissions based on high quality base oils and additives that are a balanced combination of active ingredients. Special high pressure agents and other additives offer excellent wear protection even under harsh operating conditions. Applications : Gear Oil SAE 140 API GL-4 & GL-5 is designed for use in highly loaded, hypoid gears and for use as an extreme pressure gear oil where this grade of lubricant is specified by the manufacturer. Specifications : API GL-5 API GL-4 MIL-L-2105D ZF TE-ML 05A CS 3000B Ford M2C-9002A Mack GO-G GM 1899M, GM 93740141, GM 93740140 Features and Advantages : Excellent adhesion and pressure resistant lubricating film Good oxidation stability Exceptional viscosity temperature behaviour Low pour point Good protection against rust and corrosion Increase wear-inhibiting effect
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Gear Oil SAE 90 API GL-4 & GL-5 are lubricating gear oils for mechanical transmissions based on high quality base oils and additives that are a balanced combination of active ingredients. High pressure agents and other additives offer good wear protection under harsh operating conditions. Applications : API GL-5 API GL-4 Features and Advantages : Good thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission. Extra smooth gear shift due to reduced sludge build up and cleaner surface. Excellent corrosion protection for improved component life. Excellent antiwear and load carrying characteristics extend the life of components.Improved low temperature protection and gear shifts compared to monograde products. High compatibility with gaskets & seals, which protects component life. Specifications : Manual gear oil 90 exceeds the requirements of API GL 4 & GL 5, US MIL-L-2105.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Hydraulic Oil ISO 100 is good quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives good anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil ISO 100 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided.Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling,...
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Hydraulic Oil 68 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil ISO 68 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided.Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Hydraulic Oil ISO 46 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil 46 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided.Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment.
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Hydraulic Oil 32 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil 32 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided. Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling,...
Request for a quoteDANA LUBRICANTS FACTORY LLC
United Arab Emirates
Performance Standard : API CJ4/CI4/CH4 SAE 50 API CJ4/CI4/CH4 DIESEL ENGINE OIL is a excellent quality diesel engine oil developed from highly processed mineral base oils with advanced additive package to give superior engine protection. It is designed for use in diesel engines where monograde oils are specified. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers Specifications : SAE 50 is recommended for use in applications requiring: API CJ4/CI4/CH4 Features and Advantages : Recommended for Heavy/Light commercial vehicles. Suitable for use in turbocharged, supercharged and naturally aspirated diesel engines. Unique detergent – dispersant additive system which removes and keeps all contaminants like soot and sludge in highly dispersed state to protect engine from corrosive wear over longer drain intervals. Gives optimum cooling to all engine components. .
Request for a quoteResults for
Car - Import exportNumber of results
48 ProductsCountries
Company type