Ultraviolet resistant - Import export

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation Also available as spray version OKS 3541 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Stir/shake well before use. Apply OKS 354 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3541 on evenly. Allow excess to drip off and wait for lubricant to penetrate

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation

Product Dimensions: Height: 37 cm Width: 45 cm Glass Thickness: 5 mm Glass Weight: 700 grams General features: It is scratch resistant. It is flexible material, resistant to breakage. It is resistant to ultraviolet (UV) sun rays. Package Included: You can assemble the product with its original screws. No screws are sent.

Facade blinds are one of the most effective sunlight control systems. This type of blinds allows you to control the entry of light into the premises and adjust the direction of the rays at the desired angle. By changing the position of the blind strips, the rays can be directed to the ceiling, floor or the centre of the room. Facade blinds rotated at the right angle block the sunlight rays before they enter the room through the glass. Exterior blinds can be fully folded up or adjusted in the cold season to allow as much solar heat as possible to enter the building. Solar energy controlled in this way can be used as a free heat source. Facade blinds can maintain a temperature of 9 degrees cooler in the room during the warm season. Facade blind strips are made of aluminium. Blinds have anti-corrosion properties, resistance to ultraviolet rays. To maximize protection from the atmosphere factors, the profiles of the blinds are coated with a special polymer during production.

Product Dimensions: Height: 59 cm Width: 41 cm Glass Thickness: 4.5 mm Glass Weight: 980 grams General features: It is scratch resistant. It is flexible material, resistant to breakage. It is resistant to ultraviolet (UV) sun rays. Package Included: 2 Metal Feet 6 pcs M5 Clips 6 Thin Glass Gaskets 6 pcs Glass Gasket M6 6 pcs Washer Head Bolts 5X20

Garden gazebo. Garden table with benches and canopy. The best solution for a countryhouse. Own development of the company "RUD E.S." The production uses the best materials from the world's leading manufacturers: industrial varnishes "Renner" (Italy) and thermoplastic paints "Pullron" (Turkey) The canopy roof fabric is Navigator with UV protection and water-repellent properties. Full set. L*W*H - 2200 mm * 2500 mm * 2000 mm Can be equipped with an anti-mosquito tent. Peculiarities: the benches and the table are made of Carpathian spruce boards, treated with Renner antiseptic, coated with Renner varnish (Italy). Industrial furniture varnish with water-repellent additives, resistance to ultraviolet radiation and various weather conditions guarantees durability in harsh operating conditions. The color of the awning is in perfect harmony with the color of the frame and roof. Metal parts are painted with special polyethylene powder paint Pullron, which is anti-vandal, anti-graffiti.

Seal for plastic, aluminum and wooden structures Factory "Standart Prof"® produce seals for plastic, aluminum and wooden windows and doors profiles. The seals is made of thermoplastic elastomer (TPE) with excellent elasticity at subzero temperatures and low compression set at temperature higher 70С. High UV and ozone resistant. Wide range of colors according with RAL. Application area: for sealing various types of window and door blocks, assembly joints of double-glazed windows and other translucent structures. Specification: super elastic low temperature resistant profile based on styrene-ethylene-butylene rubber with increased resistance to ultraviolet and ozone. Does not contain harmful substances, has no smell, does not stain the profile. Complies with GOST 30778-2001. Transportation and storage conditions: profiles should be stored in a packe Packaging: the seal is covered with a silicone oil, winded up on a cardboard coil, put into a plastic bag then set into a cardboard box.

Ultraviolet Masterbatch Anti-Slip Masterbatch Optic Bright Masterbatch Masterbatch Application: Mine Colours can provide colour and additive masterbatch options for agriculture industry. Greenhouses requires ultraviolet resistant plastic additives as well as optic bright masterbatches for the longevity of the greenhouse. Thank to our vast experience from working closely with Turkey’s leading greenhouse manufacturers, we can provide necessary plastic additives and colours for agriculture industry.

The metallic structure is made of galvanized steel of 60mm diameter. The Sendzimir Z275 zinc-coating and the E260 steel offer the guaranty of the quality and durability of these structures. The entire surface of the classic tunnel is covered in 200μm three-layered film, sealed with aluminum profiles with PVC. The film is thermal and it has the following properties: UV resistant (ultraviolet), EVA resistant (elongation 600%), anti-dust exterior layer, 90% transparency, 20% diffusion, anti-condensation interior layer, 0,20mm thickness, 57 months warranty and 6-7 years lifespan. The access is assured through a sliding door plated with polycarbonate and set up at one of the edges. For natural ventilation, the tunnel is equipped with a lateral opening through manual rolling of the film on both sides. Optional equipment: top vent, gable windows, automation of vents, irrigation system, HVAC, screens etc. For more information please visit our website or contact us.

Acrylic copolymer is an emulsion-based, matt-looking, wipeable, silicone-added water-based topcoat paint that can be applied to inner and outer surfaces. It adheres well to all kinds of wall surfaces, is resistant to ultraviolet rays, does not fade and does not cause cracking and flaking.

Drying Drying systems for granulates and powder Whether surface moisture, capillary moisture or crystal humidity – each product has its own requirements of the drying. The following applies: With Ebbecke Verfahrenstechnik AG your contract drying is in the best of hands, because we dry granulates and powder carefully according to the specific requirements. On request we can even develop new and innovative drying processes for you. System diversity as a basis for a perfect result With the selected drying process, our process engineers take into account for example the temperature sensitivity, resistance to ultraviolet radiation (infrared radiation), the surface structure and the capillary structure of the product which is to be dried. Of course, the differences in the output moisture content and the desired residual moisture must be included in the procedural evaluation of an efficient drying. However, not every drying system is suitable for every material which is to be dried. To get

The greenhouse is designed to resist to difficult climate conditions as they are in Europe. The metallic structure is made of E260 steel, with Sendzimir 275g Zn/sqm galvanization. The steel is designed specially for greenhouses and tunnels, because it is very resistant in a corrosive environment. The steel impact- and distortion-resistant, with a smooth surface thus protecting the film against premature wear. Professional three-layered film of 200 microns, resistant to ultraviolet (UV), elongation 600% (EVA), exterior anti-dust layer, interior anti-condensation layer, 90% transparency and 20% diffusion. Warranty for 57 months and lifespan of approximately 6-7 years. The structure can be customized for your needs when it comes to: glazing, roof/side/gable vents, HVAC, access door, irrigation etc. For more information check out our website or contact us.

On derivations of aerial lines and installation in walls of facilities in second and third type atmospheric air according to the standard 15150-69.1. The conductor is twisted by aluminum wires made from aluminum wire by twisting, Compacted. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effectAgreed during receiving order from the customer. Conductor cores are marked with figures 1, 2, 3. An inscription is made on conductor core: “JSC Sakcable” cable brand, manufacture year

In aerial lines with rated voltage 10/30kV in second and third type atmospheric air according to the standard 15150-69, including shores and industrial and salty sand regions. 1. The conductor is made from aluminum wire by twisting. Compacted with a special device. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effect XLPE insulationagreed during receiving order from the customerAn inscription is made on conductor core: “JSC Sakcable” cable brand, manufacture year.

In magisterial air lines and its derivations in the second and third type of atmospheric air, accordance with standard Gost 15150-694. The conductor is twisted by aluminum wires and it is compacted. 5. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effect 6. Neutral conductor is twisted with aluminum solid wires or aluminum wire with steel core and uninsulatedagreed during receiving order from the customerMarking of conductor cores with figures 1, 2, 3. On one of the conductor cores an inscription is made: “JSC Sakcable”, cable brand, manufacture year

For supply and distribution electricity to power and lighting networks with variable voltage 0,660 / 1 kV . Used in the main overhead power line and in residential branching.1. The conductor is twisted by aluminum wires and it is compacted. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effect 3. Neutral conductor is twisted with aluminum solid wires or aluminum wire with steel core and uninsulatedagreed during receiving order from the customerMarking of conductor cores with figures 1, 2, 3. On one of the conductor cores an inscription is made: “JSC Sakcable”, cable brand, manufacture year

It is manufactured with the best combination of rubber and latex suitable for animals. Its resistance to ultraviolet rays, acid and weather conditions have increased. Surface texture and pattern provide maximum slip resistance. The detachable top layer(cover) allows easy changing the sponge in its.1.quality rubber with fabric court and latex ensures durability, long term use.

GREENHOUSE TAPE It is a pressure proof, acrylic based, sticky and transparent tape. It is not halogen, so it is chemical and ultraviolet rays resistant, therefore it has a general usage.

New generation gutter system, able to perform its functions for many years without losing functionality and aesthetics. STC gutter system - is the only metal system (0.5mm), all the elements of which are made by molding and deep elongation. The stamping and drawing technology provides extreme resistance to loads and their exact geometry to the elements of the system. The production method of the elements of the STC drainage system makes it possible to simplify the assembly by triggering one element in the other. The drainage system is galvanized and covered with a protective polymer coating with a thickness of 80 - 250 microns, resistant to ultraviolet rays and precipitation. The product can be applied to three different types of coating: polyester, polyethylene or polypropylene. The last coatings are resistant to the marine climate and aggressive environments. These thicknesses and types of coatings guarantee a guaranteed lifetime of products over 50 years.