Meters - Import export

The Magnet UV tamper-evident seal is an antimagnetic sticker seal. It is designed to control the protection of metering devices. It consists of a sticker base with a protective layer, a transparent plastic capsule, and a magneto-sensitive suspension inside the capsule. The sticker base has a special inscription - "OPENED" - that appears when there is an attempt to remove the seal from the surface. The inscription does not disappear if the sticker is attached back on. The capsule features a UV glow effect, which makes it easy to check the integrity of the seal in poor lighting conditions. The magneto-sensitive suspension irreversibly changes its pattern when an attempt is made to influence the meter with a magnet with the intention to alter the readings. Clixar manufactures two types of Magnet UV seals that have different sensitivity thresholds - 50 mT and 100 mT. The transparent capsule makes it possible to protect

Magnet is an antimagnetic security sticker seal made as a sticker with a transparent capsule. The sticker seal has a special adhesive composition that makes it possible to attach the seal to plastic, metal, glass, and painted surfaces. The capsule contains a special suspension, which irreversibly changes its pattern when exposed to a magnetic field. Changes in this pattern are evidence that intruders were making an attempt to influence the meter with a magnet to modify its readings. An additional level of protection of the tamper-evident seal Magnet is provided by a special inscription "OPENED", which appears when someone attempts to remove the seal from the surface and does not disappear even if an effort is made to glue the seal back on. This makes it easy for inspection authorities to spot an attempted seal tampering.

Magnet M2 is an antimagnetic security sticker seal made as a sticker with a transparent capsule. The sticker seal has a special adhesive composition that makes it possible to attach the seal to plastic, metal, glass, and painted surfaces. The capsule contains a special suspension, which irreversibly changes its pattern when exposed to a magnetic field. Changes in this pattern are evidence that intruders were making an attempt to influence the meter with a magnet to modify its readings. An additional level of protection of the tamper-evident seal Magnet M2 is provided by a special inscription "OPENED", which appears when someone attempts to remove the seal from the surface and does not disappear even if an effort is made to glue the seal back on. This makes it easy for inspection authorities to spot an attempted seal tampering.

Wide range of soil moisture measurement: 8 ~ 100 % depending on the soil type. High measurement accuracy of the device: ±0,5 %. Number of predefined soil type groups: 3 (sandy soil, black soil, peat). Number of user groups: 4 (can be adjusted by the user to any type of soil by means of calibration). English-language interface. The device has an ergonomic design and a robust ABS plastic case for use in the field. Large backlit LCD display for easy reading of readings. The moisture meter is equipped with a 165 mm long penetrating probe. Operating conditions: air temperature 0 ~ 60 °C, relative humidity 0 ~ 90 % RH. Power supply: 3 1.5 V AAA batteries. Possibility of metrological calibration of the device (optional).

Grain moisture meter METRINCO M150G is designed for fast and accurate measurement of moisture content and temperature of grain crops - sunflower, wheat, barley, corn, rape, oats, soybeans, buckwheat, peas. The moisture tester is based on the dielcometric measurement method, which ensures high sensitivity and accuracy of the device, and the considerable length of the probe allows you to make measurements at different depths of the material.

The METRINCO M118W moisture tester is designed to measure the moisture content of wood in a non-destructive manner. The moisture meter is designed to measure the moisture content of processed wood (planed board or beam, finished wood products, etc.). It has the highest measurement accuracy among our line of non-destructive wood moisture meters (in practice, the accuracy is better than 1%). It is designed to work with wood up to 8 mm thick. Suitable for measuring the moisture content of veneer and lamellas. This model has a dielcometric method of measuring wood moisture content - the test sample is not damaged during testing. To take a measurement, simply place the device on the surface with the sensitive sensor and wait for the readings to stabilise. Features of the Metrinco M118W: The device can determine the moisture content of wood products in the range from 0 to 40% with very high accuracy.

It is designed for fast and accurate measurement of wood moisture, including lumber, treated and untreated timber, as well as building materials - concrete, screed, cinder block, plaster, tiles, bricks, sand, etc. It is the most popular universal moisture meter in our range. Thanks to a special spring sensor, the device can measure the moisture content of materials with a rough surface while maintaining high measurement accuracy. The M120W moisture meter can also measure materials under non-conductive surfaces, such as painted or polymer-coated boards, concrete under linoleum, moisture content of materials in PVC bags, etc. The moisture meter operates on a dielcometric principle. To make a measurement, you need to attach the sensor plates of the device to the object of measurement and wait for the device to stabilise. Features of the Metrinco M120W moisture tester: wide measuring range: 0...80 % depending on the material group high accuracy of the device: 1,5 %.

Key features and advantages of the METRINCO M130G grain moisture tester (in comparison with similar devices): The METRINCO M130G moisture tester does not require grain compression, which significantly reduces the measurement time and does not lead to wear of rubbing parts, such as the lid and the measuring chamber cup. To take a measurement, simply immerse the paddle-shaped sensor completely in the grain and wait for the measurement result to appear on the screen. Thanks to its fast measurement speed, this grain moisture tester can be used in process control, in production lines, during raw material acceptance, etc. The high accuracy of the device has been confirmed in the laboratory and in practice. The METRINCO M130G grain moisture tester is manufactured in Ukraine, which greatly simplifies obtaining technical support, service and free firmware updates (number of grain crops) from the manufacturer.

It is equipped with an impact (hammer) type sensor with 45 mm long insulated needles (length of the penetrating part: 30 mm, diameter of the penetrating part: 3.5 mm). Model 140W differs from the similar model M141W in the lack of an infrared pyrometric sensor, which is used for non-contact measurement of wood temperature and allows for automatic temperature compensation during measurement. Instead, the M140W model requires manual adjustment of the wood temperature. Features of the Metrinco M140W wood moisture meter: wide measuring range: 4...140 % depending on the material group high accuracy of the device: 0,5 % total number of wood types: 192, grouped into three classes. English language interface high-quality ABS plastic case with a protective silicone (rubber) cover screen backlight

METRINCO M121P is a professional SHF moisture meter for paper in rolls and stacks, as well as for cardboard and cardboard products. The device is designed to take quick and accurate measurements of moisture content in paper, including filtering, corrugated and creped paper, as well as in cardboard of various thickness, density and number of layers. METRINCO M121P moisture meter for paper and cardboard utilizes the dielcometer measurement method. In order to perform measurements, put the device’s sensor plates against to the object of measurement and wait for the moisture meter readings to stabilize. Due to a specifically designed spring sensor, the device is able to measure moisture content of materials with uneven or rough surfaces with high measurement accuracy. The device is also able to measure moisture content in materials under non-conductive surfaces, e.g. moisture content of paper in PVC packaging without unpacking thereof, etc.

METRINCO moisture meter is designed for measuring wood moisture content in a non-destructive way. METRINCO M110W features: Moisture meter’s operation is based on the dielcometer method of measurement. The device can measure moisture content of wood products in the range from 0 to 40% with very high accuracy. For convenience purposes, wood types are divided into 5 groups depending on wood density and displayed in the selection menu in Ukrainian, which makes using this device much simpler. Technical characteristics of METRINCO M110W wood moisture meter: measurement method: dielcometer, non-destructive measuring range: 0-40% wood groups number: 5 tolerance: ±1.5% resolution: 0.1% penetration of high-frequency radiation field: 40 mm operation conditions: 0~60 °C, 0-90% relative humidity power supply: 3 AAA 1.5 V batteries dimensions: 115x68x25 mm weight: 140 g with the batteries

TOR-1 is a device for quick and precise measurement of the moisture content in insulating oil, even in miniscule quantities. The high sensitivity and excellent long-term stability make this tester an ideal solution for constant control of moisture content in transformer oil. Operating principle The amount of water in the oil can be described as an absolute value in ppm or a relative value of aw: ppm is the ratio of moisture weight to oil weight; aw is the actual water content as a percentage of water content in fully saturated oil. A value of aw = 0 corresponds to completely dry oil, while aw = 1 corresponds to a completely saturated oil. The measurement with this sensor is based on exceptional long-term stability and resistance of capacitance sensor elements to contamination. The measured physical properties are water activity w and temperature T. Using these parameters, the device calculates the amount of water (ppm) in mineral transformer oil.

Gear pumps of the G11-2 and G11-1 types and pumping units of the BG11-2 type are designed to pump mineral oil into the lubrication systems of machine tools and other stationary machines. Eccentric piston pumps of H400 ER(UR), H401ER(UR), H403ER(UR) types are designed for for lubricant injection in hydraulic systems of machine tools, presses, lifts and other machines. Oil gear pumps of NShM type and ANShM type units are designed for pumping oil products, as well as fuel oil in boiler installations.

Designed for dosing and pumping melts in the production of artificial fiber (viscose, cellulose acetate, lyocell), synthetic fiber and polymeric materials (PAN, PET, PA, PP, PVC, etc.). Used in adhesive and polyurethane systems. Pumping capacity ranges from 0.3 cm3/rev to 250 cm3/rev. Made of materials with high wear resistance.