Results for
CLIXAR
Ukraine
The twist seal Turbion is a seal made of polycarbonate. It has two pre-installed parts: a case and a rotor. The transparent (sometimes semi-transparent) case reliably protects the internal locking mechanism and helps to monitor its integrity. The internal rotor consists of 4 leaves that allow to rotate it only clockwise. This means that it is impossible to open or remove the seal without destroying the rotor, which warns the intruders of unavoidable and obvious signs of external interference. As an added security, the case catch and rotor are marked with the same unique number. This eliminates the possibility to replace the seal or some of its parts with another. Also, your logo, QR and bar codes, and other information can be laser marked on the case catch. All markings are lasered through the thickness of the surface making it impossible to erase them and apply another marking without visible damage.
Request for a quoteCLIXAR
Ukraine
The Lumiseal twist seal is made of polycarbonate and consists of two pre-installed parts: the case and the rotor with catches featuring the unique number. It is applied by laser, which virtually eliminates the threat of counterfeiting or replacing the seal number. The rotor of the seal can only be rotated clockwise, so you can be sure that once the seal is installed, no one can open it without leaving visible signs of tampering. An additional degree of protection is marking applied by laser through the thickness of the seal surface. Thus, it cannot be erased, removed, or counterfeited. The unique number is applied on the case and the inner rotor, so no one can replace any part of the seal. Additionally, your company logo, QR, and bar codes can be marked on the case catch.
Request for a quoteCLIXAR
Ukraine
Garant is an anchor seal that is made of polycarbonate and consists of two pre-installed parts: a transparent body with holes for the wire, as well as the latch insert. The latter securely fixes the wire inside the seal. The insert has special ribs, which exclude the possibility of opening the seal backward. Transparency of the parts enables users to monitor the integrity of the locking mechanism and the rope. The seal insert has a convenient head that makes it possible to easily close the seal, as well as control attempts of unauthorized access or tampering. If these manipulations are attempted, the seal displays visible signs of impact, which is an indicator of attempted tampering. Additional protection against tampering and forgery is provided by laser marking - the seals are marked with unique custom numbering. The number is applied to both elements of the seal structure: the case and the insert. Laser marking is made through the thickness of the surface of the seal
Request for a quoteCLIXAR
Ukraine
Carat is an anchor seal made of polycarbonate. The design of the seal consists of two pre-installed parts: a transparent body with holes for the rope, as well as a anchor insert that fixes the rope inside the seal. Parts of the seal are made in several colors, yet they are transparent. This feature enables users to monitor the integrity of the locking mechanism and rope because they remain visible during operation. The seal insert is equipped with a convenient head that ensures easy closure of the seal, as well as control of possible attempts of unauthorized access or tampering. If such actions are attempted, the seal leaves visible signs of tampering, which is an indicator of attempted unauthorized access. Laser marking is additional protection against tampering or counterfeiting. It is applied through the thickness of the surface eliminating the possibility of replacing or counterfeiting the numbers and the seal as a whole. The application of customized numbering makes each seal
Request for a quoteCLIXAR
Ukraine
The tightening seal Bankseal is a monolithic polyethylene tightening seal that has a self-locking mechanism. It was developed specifically for the banking sector, but it has also been successfully used for sealing a huge number of other items and facilities. The Bankseal consists of a catch, an internal locking mechanism, and a ribbed tail. The locking mechanism features the two-leaf collet, which allows the tail part of the seal to be pulled in one direction only and has no reverse movement. Thus, the lock does not allow pulling the tail part backward. To prevent the possibility of the seal replacement, an individual number is applied to its catch. The number is marked through the thickness of the coating by laser, thus the number cannot be erased or counterfeited. In addition, the company logo, QR, and bar codes can be marked on the catch.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CLIXAR
Ukraine
The sealing wire consists of twisted or twined steel threads with or without a braid. The wire is used to fasten rotary seals and latch seals. The degree of reliability of the installed seal depends on the correct choice of the sealing rope. When choosing a sealing wire, it is recommended to pay attention to the following parameters: hole diameter in the seal type of steel (galvanized, copper-plated, stainless steel) coating of steel threads wire diameter number of cores tensile force The wires are used wherever rotary, lead, or latch seals are required. The installation of these seals is carried out on objects with eyelets or on large objects. We offer the following types of sealing wires:
Request for a quoteCLIXAR
Ukraine
The Twisteiro tamper-evident twist seal is made of polycarbonate. It consists of two pre-installed parts: a transparent case with a catch and a rotor insert. It is used in combination with a sealing rope. The transparent case makes it possible to monitor the integrity of the inner rotor and also protects it from tampering. The inner part of the rotor can be closed by turning it clockwise only. It helps to secure the rope in the seal so that it cannot be reached without visible signs of tampering. For better protection, the same unique number is applied to the case and rotor. This measure prevents the substitution of individual parts of the seal. The numbers are laser-marked through the thickness of the surface, so they cannot be easily erased and replaced with a new number or tampered with. Clixar also provides the service of applying your company logo, QR and bar codes, and other information on the seal by laser.
Request for a quoteCLIXAR
Ukraine
The Arrow V3 tamper-evident polypropylene tightening seal. The structure of the seal features a catch, a locking mechanism, and a tail part. The locking mechanism is equipped with a collet of unique design made of stainless steel. The operating length of the seal is 385 mm (15.16"). Seal is produced with labels on the back side The locking mechanism features the leaves of the collet that are pointed in one direction, thus blocking the reversal movement of the seal tail, and preventing its opening unnoticed. If anyone tries to open the seal and pull out the tail - the lock cuts the tail off and the seal can not be restored. A transparent cap is placed on top of the collet, which protects it from external damage and makes it possible to check its integrity at any time. The cap also glows under the UV light, which makes it easier to detect the seal or check it in poor light or darkness by using a special UV flashlight.
Request for a quoteCLIXAR
Ukraine
Rubin is a tamper-evident anchor seal made of polycarbonate. The design of the seal consists of two pre-installed parts: a transparent body with holes for the rope, as well as a latch insert that fixes the rope inside the seal. The Rubin anchor seal is made in several colors, yet it is transparent. This feature enables users to monitor the integrity of the locking mechanism and rope without extra efforts because they remain visible during operation. The seal insert is equipped with a convenient head that ensures easy closure of the seal, as well as control of possible attempts of unauthorized access or tampering. If there are attempts of such actions, visible signs of tampering can be seen on the seal, which is evidence of attempted unauthorized access. Laser marking is additional protection for the product. The process of its application makes it impossible to counterfeit the seal because the laser applies a unique number and does it through the thickness of the surface.
Request for a quoteCLIXAR
Ukraine
Arrow V2 is a tamper-evident seal produced of polypropylene. It is a tightening seal by the structure that features a catch, as well as a tail part, there is a locking mechanism between them, it is protected by a special cap. The seal catch helps to conveniently fasten the seal and provides a space for identifying information, such as a unique number and other details. The operating length of the seal is 215 mm (8.47”). Clixar products are additionally protected by laser marking with a unique eight-digit identification number on the catch, as well as on the seal's cap. This type of marking is made through the thickness of the seal surface, which prevents the chance to erase the number without a trace, apply a new one, or replace it without any visible evidence. In addition, Clixar offers customers the opportunity to apply their company logo, QR and bar codes, and other relevant information.
Request for a quoteCLIXAR
Ukraine
Arrow Lux is a tightening seal made of polypropylene. It features a tightener with a catch and a tail part; there is a locking mechanism with a protective cap between them. The catch of the seal is designed for convenient fastening, as well as displaying identifying information: unique number, logo, and other details. The operating length of the seal is 385 mm (15.16") Another degree of protection of Clixar seals is laser marking with a unique eight-digit number on the catch and cap. It is applied through the thickness of the surface of the seal, thus, it is impossible to erase the marking completely and apply a new number or replace the seal. We also provide the opportunity to apply your company logo, QR and bar codes, and other information on the seal catch.
Request for a quoteCLIXAR
Ukraine
Black Prince is a tightening seal made of black polypropylene. It is classified as a tightening seal. The seal consists of a catch as well as a locking mechanism and a tail part. The locking mechanism contains a four-leaf spring steel collet, which provides reliable protection against tampering. The seal has an extended working length of 385 mm (15.16") for easy use on large and bulky objects. The lock provides reliable protection with a four-leaf collet made of spring stainless steel, where the leaves are slightly lifted upwards. When there is an attempt to pull the seal tail backward, out of the lock, the collet leaves drop down and cut the tail part off, thus rendering the product unusable. It means that you will always have visible evidence on the seal if there has been an attempt of external interference.
Request for a quoteNHM LIMITED
Ukraine
TECHNICAL SPECIFICATIONS: Product to be packed: Yogurt, Lala, Sour Cream, Mayonnaise, Mustard Paste, Honey Dosing volume: 200-3000 ml Speed: up to 20 tubs/min Cup material: Plastic tubs Lid material: Aluminum Voltage: 220/380 V, 50 Hz Power: 0.6 kW/ 1kW Dimensions: 1600 x 900 x 1400 mm Weight: 150 - 500 kg BASIC SCOPE OF SUPPLY: De-nesting of tubs from magazine to transfer mechanism Linear movement of tub Filling of set product volume Placing of plastic lid on tub Leak-proof closing of plastic lid Date coding by contact type ink printer on self-adhesive label Transfer of filled tub on table for ready products TUB FEEDING UNIT Operator puts stack of tubs into infeed magazine (capacity of infeed magazine is approx. 20 pcs.). Tub feeding unit provides piece by piece feeding of tubs on the conveyor. Tub feeding unit provides possibility of stacking for three tub sizes (for 200 ml, 500 ml and 3000 ml).
Request for a quoteResults for
Atm - Import exportNumber of results
14 ProductsCompany type