Results for
SIMER SAC METAL SHEET PROCESSING & FORKLIFT
Turkey
tiltable recycling apparatus
Request for a quoteSIMER SAC METAL SHEET PROCESSING & FORKLIFT
Turkey
painted and welded product
Request for a quoteISONEM BOYA VE YALITIM TEKNOLOJILERI INS.SAN.TIC.A.S.
Turkey
ISONEM ANTI SOUND PAINT, the acoustic paint which is used to stop and reduce sounds, is designed to absorb and isolate the sound in the best possible way. According to the measurement and analysis carried out in conformity with the TS 140-s Standart; It has been certified in Türkak approved accrediting laboratoires, that the applied paint reduces and absorbs the sound level 2,51 dB as regards to 1000Hz, when applied as a 1 mm thick layer and it reduces and absorbs the sound level 4,85 dB as regards to 1000Hz, when applied as a 2mm thick layer, in the 1/3 octave frequency band. The paint is water based. It can be manufactured in any color specified. In addition to its sound isolation properties, it is resistant to fires whit its delayed flammability and non-flammability properties. It is suitable for using to reduce sound levels in any place with sound level problems. PLACES OF USE: • Apartments, • Engine and Machine Rooms, • Disco and entertainment venues, • Cinemas and theatres
Request for a quoteISONEM BOYA VE YALITIM TEKNOLOJILERI INS.SAN.TIC.A.S.
Turkey
ISONEM THERMAL PAINT is special high performance paint containing special vacuumed microspheres that are elastomeric resin based, have vapor permeability with low heat conductivity, high solar radiation absorptivity and high surface heat transmittance values and provide interior and exterior heat and water insulation. Its effectiveness has been proved scientifically. Depending on the applied number of coats, it provides energy savings up to 40% in the heating and cooling energy costs of buildings. When the ISONEM THERMAL PAINT with special vacuum microspheres is used as interior wall paint, the radiant heat that is generated inside is reflected to the interior environment. When it is used on the exterior, the incoming radiant heat is reflected back to the outside. ISONEM THERMAL PAINT FEATURES: •Radiant heat proof, •Provides energy savings up to 40%, •Applicable to indoor and outdoor surfaces, •Low labor costs, easy and short application, •Prevents moisture and mold formation
Request for a quoteMAXRAY KIMYA SANAYI VE TICARET LIMITED SIRKETI
Turkey
Acrylic based, fast drying, solvent based, protective and decorative spray paint. Inside and outside, wood, metal, glass, ceramic, plastic, paper, cardboard, concrete making flowers etc. used on surfaces such as Machinery, spare parts, steel goods, wooden furniture, hard plastic, hobby and handicrafts, motorcycle/bicycle/auto etc. It is suitable for use in areas such as Resistant to fading, harsh weather conditions and water. It is scratch and impact resistant. It is lead-free, does not contain CFC gases that pollute the atmosphere and are harmful to the ozone layer.
Request for a quoteBENG ROBOT TEKNOLOJILERI A.S.
Turkey
We use time and consumables much more efficiently with robotic solutions in paint processes. With the decrease in paint usage according to the current situation, we both increase efficiency and keep your employees away from the unhealthy atmosphere of the paint environment by applying standard thickness paint without any errors on the entire surface.
Request for a quoteAKFEN
Turkey
TM Mühendisli Ltd. Şti started its commercial life in 2009 in order to provide raw and processed metal products trading, manufacturing and engineering services to our industrial establishments in our region. Our business continues its commercial activities in a total of 3250m2 closed and 1500m2 open area in Torbalı and Bornova Doğanlar. Cnc sheet metal work Turkey Turkey Cnc sheet metal work Cnc sheet metal work Cnc metal work Cnc sheet work Cnc sheet metal Good Cnc sheet metal work Best Cnc sheet metal work Good Cnc sheet metal work Turkey Best Cnc sheet metal work Turkey cnc laser cutter cnc laser engraver cnc laser cutting machine cnc laser operator cnc laser table cnc laser cutting cnc laser cutter for sale cnc laser operator salary cnc laser attachment cnc laser and router cnc laser alignment cnc laser and 3d printer cnc laser arduino cnc laser acrylic cutter cnc a laser build a cnc laser cutter how a cnc laser cutting
Request for a quotePERGEL METAL
Turkey
The paint plant is especially preferred in the construction and furniture industry. The materials used in this sector are painted both for aesthetic purposes and for protection purposes. Paint plants is a far-reaching term. There are varieties. Its quality and form vary. In general, the age paint plant is more preferable. There is a wet paint booth, conveyor system and drying oven in the paint plant. It is produced in accordance with the most suitable conditions and made suitable for use.
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with solid filter, the air is sucked through the filters by exhaust fans while the unused wet paint is held by paper or fiber filters. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Powder and Wet paint equipment must be determined and selected carefully according to the properties of the parts to be painted. In our systems, we use the highest quality, most efficient and most reliable, manual and automatic powder and wet paint guns, single and multi-axis robots.
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with water curtain, the air is sucked through the water curtain by exhaust fans while the unused wet paint is held by water. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
The main part of the wet painting lines that we have produced is wet painting booths. Wet painting booths are used to apply wet paint on the material under the most ideal conditions after the surface cleaning process and to prevent the paint that can not hold onto the work piece from being escaped to the environment. The wet paint is atomized by high pressure air and applied on the part that is going to be painted. It is preferred because it is easy to apply and gives good results. As Rota Makine, we design lines with conveyor and robots to offer our esteemed customers who want to make production with high capacity, automation and untouched. Our wet painting booths are categorized as With Water Curtain and With Solid Filter because of their different advantages. Wet enameling cabinets for enamel applications are also available in our scope of production.
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. Recycling is done with the cyclones in our powder coating booths with cyclone. It is preferred because it allows easy and fast color change. The powder particles which are not used passes through the cyclone unit before the filter unit. While the particles go down through cyclones with centrifugal effect, the particle that cannot be reused is sent to the filter unit and filtered there. The parts which are suitable for recycling are recycled to the system for reuse. Multi and mono type cyclone units are used in our booths. Both types offer efficiency with recycling systems, practicality with easy color changing. In filter cabins, it is necessary to change
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
The industrial ovens we produce are used to dry the water and chemical particles remaining on the material after the surface cleaning, moreover to finish the chemical reaction of the paint, after painting process. Our ovens are renowned in the sector for their heat homogenization, give the opportunity to long term usage with trust and designed for maximum efficiency in a frame of our respect for nature policy.
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Pre-treatment is the first step of the painting process. This is why it has crucial importance. By cleaning and coating the surface of the part before painting, the paint will retain its first-day quality with out any degradation for long years by strong adhesive forces. A quality product is possible with a quality surface pre-treatment.
Request for a quoteASIR GROUP
Turkey
50% COTTON / 50% POLYESTER Digital Printing on Canvas Size: 70 x 100 cm Wooden Frame: 2 x 3 cm Name: Girl with Balloon Artist: Banksy
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ASIR GROUP
Turkey
100% CANVAS Frame: 100% Wooden (Thickness: 3 cm) Size: 50 x 70 cm Name: Unknown Artist: Anonymous
Request for a quoteTEKNIK CIZGI KESIM BUKUM METAL SAN VE TIC LTD STI
Turkey
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Request for a quoteHUGE PUMP
Turkey
Helical gear pumps are produced from stainless steel and cated materials. Gear pumps which are perfect for fluid with diffirent characteristics with high and low viscosity are used in food, beverage and medicine industries varying from fuel transmission to different chemicals together with its hygienic series.
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 0,91 kg Height : 80 cm Width : 14 cm Material 30x5 mm
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 9,35 kg Height : 70 cm Width : 55 cm Material: 12x12 mm
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 32,95 kg Height : 180 cm Width : 80 cm Material 12x12 mm
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 0,91 kg Height: 80 cm Width: 14 cm Material: 12x12 mm
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 1,35 kg Height: 80 cm Width: 13,20 cm Material: 12x12 mm
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 1,58 kg - 3,15 kg Height: 80 cm - 80 cm Width: 20 cm - 20 cm Material: 3 mm - 6 mm
Request for a quoteFATIH WROUGHT IRON
Turkey
Weight: 5,82 kg Height : 40 cm Width : 88 cm Material: 16x8 mm
Request for a quoteMICRON AMERICA
Turkey
Please see the related products section down below for attaching tools needed for this type of grommet hand press machinery, hand tools or powered machinery. For best results use our #18 hand tools.
Request for a quoteMICRON AMERICA
Turkey
Our quality Micron Curtain Grommets are made of heavier gauge brass material, are corrosion resistant ,will not rust and is non magnetic. Available in sizes # 12 (1 1/2” ID) , # 15 (2’’ID), # 18 ( 2 1/2” ID) Available in 9 different finishes.
Request for a quoteResults for
Painting - Import exportNumber of results
156 ProductsCountries
Company type
Category