Paint spraying - Import export

Acrylic based, fast drying, solvent based, protective and decorative spray paint. Inside and outside, wood, metal, glass, ceramic, plastic, paper, cardboard, concrete making flowers etc. used on surfaces such as Machinery, spare parts, steel goods, wooden furniture, hard plastic, hobby and handicrafts, motorcycle/bicycle/auto etc. It is suitable for use in areas such as Resistant to fading, harsh weather conditions and water. It is scratch and impact resistant. It is lead-free, does not contain CFC gases that pollute the atmosphere and are harmful to the ozone layer.

Preparation is always the key to a successful project, take your time to clean, treat any rust, rub down and mask the area. You will need to purchase a grey primer and apply at least two coats of the primer to ensure optimum adhesion and to give the best finish. When you are ready to apply the paint, build up the colour with several thin coats, rubbing down with wet and dry sandpaper in between coats to ensure a professional finish. For metallic and pearlescent colours it is essential to purchase a lacquer, which will give a high gloss finish to solid colours.

Conveyors that we use for painting plants and various transfer lines are the most important parts of the automatic systems. Commonly used Webb, Kardan and Power & Free type conveyors are projected and put into used by us. Semi-automatic conveyor lines are also produced for lower production capacities.

Powder and Wet paint equipment must be determined and selected carefully according to the properties of the parts to be painted. In our systems, we use the highest quality, most efficient and most reliable, manual and automatic powder and wet paint guns, single and multi-axis robots.

Penetrant non-destructive testing method is a system that is used for the detection of cracks in the surfaces of parts. After the material which is going to be subjected to penetrant test is pre-cleaned, it is subjected to penetrant application as dipping or spray. After this process, the material is rinsed and dried. Powder “developer” is applied electrostatically on the dried material. Finally, possible cracks and faults on the material are detected by checking under the UV lamp.

It is the furnaces where the hardening process of various aluminum profiles is happened, in other words, the aging process. Aluminum profiles are loaded into the furnace with the help of loading cars. The profiles which are kept in the oven at about 185 °C for 6-8 hours will be harden with the aging process. The whole operation is programmed with the PLC control unit. Thanks to its safe guillotine doors, they contribute to the air circulation in the interior and provide security with the locking mechanisms.

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with water curtain, the air is sucked through the water curtain by exhaust fans while the unused wet paint is held by water. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

The main part of the wet painting lines that we have produced is wet painting booths. Wet painting booths are used to apply wet paint on the material under the most ideal conditions after the surface cleaning process and to prevent the paint that can not hold onto the work piece from being escaped to the environment. The wet paint is atomized by high pressure air and applied on the part that is going to be painted. It is preferred because it is easy to apply and gives good results. As Rota Makine, we design lines with conveyor and robots to offer our esteemed customers who want to make production with high capacity, automation and untouched. Our wet painting booths are categorized as With Water Curtain and With Solid Filter because of their different advantages. Wet enameling cabinets for enamel applications are also available in our scope of production.

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. Recycling is done with the cyclones in our powder coating booths with cyclone. It is preferred because it allows easy and fast color change. The powder particles which are not used passes through the cyclone unit before the filter unit. While the particles go down through cyclones with centrifugal effect, the particle that cannot be reused is sent to the filter unit and filtered there. The parts which are suitable for recycling are recycled to the system for reuse. Multi and mono type cyclone units are used in our booths. Both types offer efficiency with recycling systems, practicality with easy color changing. In filter cabins, it is necessary to change

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. In our powder paint booths with filter, the air is sucked through the filters while the unused powder particles are held by filters. The filters are automatically and periodically pumped air in reverse direction to direct the powder paint that held by filters to the sieve tanks which is under the cabinet for reusing. As a result of this process, the unused powder paint is recycled. Polyester-Teflon and Sinter-Lamellar type filters are used in our booths. Polyester-Teflon filters are preferred due to their low cost and Sinter-Lamellar filters are preferred due to their long filter life. Both types offer efficiency with recycling systems, economical solution

The main part of the powder coating lines that we have produced is powder coating booths. Powder coating booths are used to apply powder coating on the material under the most ideal conditions after the surface cleaning process and to prevent the paint particles that cannot hold onto the work piece from being escaped to the environment. Electrostatically charged dye particles adhere to the surface with maximum efficiency and homogeneous spread. The system is preferred because; non-adherent powder is reusable with the recycling system in the booths. As Rota Makine, we design lines with conveyor and robots to offer our esteemed customers who want to make production with high capacity, automation and untouched. Our powder coating booths are categorized as With Filter and With Cyclone because of their different advantages. Powder enameling cabinets for enamel applications are also available in our scope of production. Our powder enamel booths are produced

Our Infrared ovens can be produced as conveyor belt tunnel or internal return (U) type. Our ovens have andirect heating system with radiation heat transfer. They are used due to the cure flat shaped parts after wet or powder coating paint applications. They are preferred because they can cure the paint three times faster than the convectional type ovens. They can be produced with natural gas or lamp type infrareds. The inner surfaces of our ovens’ panels are produced with a galvanizedor stainless steel sheets and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thicknesses determined and rock wool or glass wool is used for insulation.

Our continuous type ovens can be produced as belt tunnel type, internal return (U) type or with span conveyor. Our ovens have the indirect heating thermo-block system with convection heat transfer. It can be manufactured according to power supply sources like electricity, gas or liquid fuel. The inner surfaces of our ovens’ panels are produced with galvanized sheet and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thickness (usually 160 mm) is determined and only rock wool is used for insulation. Air curtains in the furnace are placed inlet and outlet of the oven to minimize heat loss while increasing the efficiency.

Our box type ovens have the indirect heating thermo-block system with convection heat transfer. It can be manufactured according to power supply sources like electricity, gas or liquid fuel. The inner surfaces of our ovens’ panels are produced with galvanized sheet and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thickness (usually 160mm) is determined and only rock wool is used for insulation. For paint applications up to 220 °C, for special purposes up to 400 °C ovens can be produced by our company. The doors of our box type furnaces can be produced as double-sided, top opening or as guillotine door according to needs.

The industrial ovens we produce are used to dry the water and chemical particles remaining on the material after the surface cleaning, moreover to finish the chemical reaction of the paint, after painting process. Our ovens are renowned in the sector for their heat homogenization, give the opportunity to long term usage with trust and designed for maximum efficiency in a frame of our respect for nature policy.

The dipping system which is one of the other methods is produced with a robot or crane controlled. The systems are equipped with the most efficient heating, ventilating and PLC control equipment. In our dipping lines manufacturing, AISI 304- AISI 316 stainless sheets of steel and polypropylene are used. The system should be selected according to the shape of the part, the area to be used and the corrosion resistance. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation, our company produces cold dipping lines as well as natural gas heated, electric heated, liquid fuel heated and water heated dipping pre-treatment lines according to the energy source that is planning to be used.

In the spraying pre-treatment method, applying chemicals with a certain pressure on the parts creates big positive differences on paint quality and life span. By cleaning and coating the surface of the part before painting, the paint will retain its first-day quality with out any degradation for long years by strong adhesive forces. Our spray tunnels, with the help of automation systems, allow you to be able to produce automatically and continuously with out any touch. Tunnel type spray surface cleaning lines consist of parts like spray nozzles, heat exchangers, dosing pumps and ventilating systems. In our spray lines, the AISI 304 – AISI 316 stainless sheets of steel and polypropylene are used. According to needs of our esteemed customers, horizontal belt type conveyor, compact type, and rotary table type automatic plc controlled washing machines can be produced by us. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with solid filter, the air is sucked through the filters by exhaust fans while the unused wet paint is held by paper or fiber filters. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

Features & Applications -Building construction -Fiber exposure and fiberglass products manufacturing -Pharmaceutical manufacturing -Painting and spraying workshop -Electronic assembly and insulation laying -Mining, wood, and metal processing -Motor vehicle and ship building -Agriculture and veterinary services -Asbestos removal, stripping, and clear-up or handling

PLUS SAFETY MEDICAL Protective Coverall is a high performance chemical protective suit, certified to PPE Directive Category III, Type 3/4/5/6 levels of protection, making it suitable to protect against a range of chemical jets and sprays. with additional design features including enlarged zip pulls and thumb loops, an integrated double-closing storm flap system with and chin flap, convenience of use can be offered without compromising the high level of protection offered. Product Type:Type 3/4/5/6 Chemical Suit Disposable Coverall Material:High performance external barrier film coated to non-woven fabric Zipper:Nylon on polyester braid Elastic:Neoprene rubber (latex free) Tape:Multi-layer composite barrier tape processing workshop dustproof -cleanroom / laboratory isolation dry painting , spray printing - grinding and fiberglass - industry maintenance - powder handling - etc..

Using clean, dry air is extremely important for all kinds of air powered applications. Moisture or contamination in the air which will come from the standard compressor outlet will cause complicated system errors. These complications will decrease productivity and may affect the production quality of final products. We are aware of the importance of high quality compressed air and guarantee to provide our customers with the highest quality of air.We provide an entire range of products for filtration and air purification applications. Food production, dairies, breweries, clean conveying air, chemical plants, pure air and cleanroom technology, pharmaceutical industry, weaving machines, photo labs, paint spraying, powder coating, packaging, control and instrument air, sand and/or shot blasting, general air works, microchip production, optics, process air as well as many other markets.

Combined spraybooths are designed for manual painting application for automotive industry with downdraft ventilation and drying system. It is manufactured from insulated panel body. Installed to the factory ground or to an metal basement, extraction air ducts are placed at the ground, Fresh air plenum and filtering system is located at the ceiling that creates clean environment inside the spray booth during the painting and drying application. Painting or drying option are selected manually from the control panel, flash-off and cooling positions are automatically controlled. Includes standard type illumination system and optionally Ex-zone, electrical control panel and wiring to the control panel is done. The spray booth is fully controlled by PLC control system and a touch panel. Control system indicates when filters gets contamnated. Filters are easy replaceable. The spraybooth is CE certificated and conforms to the European Norms.

The spraybooth is designed for manual painting application, with sidedraft ventilation and dry cardboard filtration system. The benefit of the retractable liquid spray booth is that it is an extendeable and saves space in the workshop at folded position during it is not used. The spray booth is environmentally friendly.

*Material: stainless steel wall + glass *Automatic shut-off *Capacity: 2.0 L *360-degree rotation base *Anti-dry *Red light *VDE plug *Paint: spray *Power: 1500W, 220-240V, 50/60Hz

ERSAPLUS MEDICAL Protective Coverall is a high performance chemical protective suit, certified to PPE Directive Category III, Type 3/4/5/6 levels of protection, making it suitable to protect against a range of chemical jets and sprays. with additional design features including enlarged zip pulls and thumb loops, an integrated double-closing storm flap system with and chin flap, convenience of use can be offered without compromising the high level of protection offered. Product Type:Type 3/4/5/6 Chemical Suit Disposable Coverall Material:High performance external barrier film coated to non-woven fabric Zipper:Nylon on polyester braid Elastic:Neoprene rubber (latex free) Tape:Multi-layer composite barrier tape processing workshop dustproof -cleanroom / laboratory isolation dry painting , spray printing - grinding and fiberglass - industry maintenance - powder handling - etc..

In order to achieve the desired quality in wet paint application, the main standards that must be fulfilled in the facilities are appropriate filtering and clean air system, suitable air conditioning and appropriate lighting. The electrical equipment in the painting facility must be suitable for the explosion document. Filtration systems must comply with the regulations of the Ministry of Environment waste gas emission values.

Type: Brighter than normal color paints which fluoresce vividly under ultra violet back lights or combined with other colors to make them more vibrant effect Features • Reflective enough to faintly see yourself • Good adhesion & solvent resistance • Instant flourescent finish • Resembles metal plating • High gloss, ideal for trim and accessory • Quick drying, acid frees • Corrosion resistant Use: Interior use Exception: Not recommended for outdoor UV exposed applications Pack Size 400ml. - Bulk 25lt. Coverage: 400ml./2.5m2 Glossy Level: High Touch Dry: 10 mnt. Colour 12 different shades of colors

Type: State of-art formula with an excellent adhesion to untreated and pre-treated polypropylene and polyethylene rigid sheets and injection mouldings. Features: •Yields satin finish with excellent film formation •Can be topcoated with gloss or mat varnish •Outstanding adhesion strength •Resistant to most industrial chemicals •Excellent scuff resistance •Resistant to bleach, detergents, alkalis, battery acid, amid motor oils Use: Use on interior & exterior applications Pack Size 400ml. - Bulk 25lt. Coverage: 400ml./2.5m2 Glossy Level: Medium Touch Dry: 10 mnt. Colour 35 different shades of Ral colors

Type: A hard, protective, natural wood stain colors that offers exceptionally long lasting beauty of wood surfaces subject to UV light, moisture, wear and abuse Features •Enriches the natural beauty of wood •Wide range of natural colors •Protection from abrasion, water, alcohol, cleaners and stain •Available in high gloss and natural satin finish •Satin finish yields excellent rich hand rubbed appearance •Transparent wood grains show through •Deep penetrating formula •Quick dries to a completiy dust-free surface •Easy one coat spray application Use: Use on smooth pressure treated wood interior & exterior Exception: Not recommended on any surfaces except wood Pack Size 400ml.- Bulk 25lt. Coverage: 400ml./2.5m2 Glossy Level: Medium Touch Dry: 10 mnt. Colour 14 different shades of Wood colors