Mineral oils - Import export

Silicon oil, silicon free ester and mineral oil based different sort of defoamers and antifoam used for wastewater treatment, automotive, textile, paint&coating, biogas production, paper and corrugated board, sugar processing, fermantation, oilfield

Lityum EP grease is yellow colored grease containing lithium soap, rust, oxidation, AW and high amount of EP additives and qualified mineral oils. It is especially intended for roller lubrication, however, also used in chassis lubrication processes.

It is special gear oil that is formulated with highly refined mineral base oils and high quality additives. It is intended to be used in gearboxes of automobiles and commercial vehicles.

it is a four-cycle mineral engine oil that provides outstanding perfor­ mance and protection in all conditions. it has been developed to provide greater protection and better oxidation control against engine wear at high and low temperatures.

It is a high performance brake liquid, resistant against temperature of 205 degrees, that is manufactured from polyethylene, glycol ethers, ether derivatives and special additives, and that is used in disk and block hydraulic brakes and hydraulic type clutch systems of motor vehicles. It is used in disk and block hydraulic brakes and hydraulic type clutch systems of motor vehicles. It can be mixed with other hydraulic brake oils having the same specifications. • It contributes to environmental protection by providing high oxidation resistance and longer service periods in proportion to mineral oils. • It protects the whole equipment against rusting and corrosion, and keeps it clean. • It is compatible with rubber type materials such as hydraulic hose.

It is a high performance brake liquid, resistant against temperature of 260 degrees, that is manufactured from polyethylene, glycol ethers, ether derivatives and special additives, and that is used in disk and block hydraulic brakes and hydraulic type clutch systems of motor vehicles. It is used in disk and block hydraulic brakes and hydraulic type clutch systems of motor vehicles. It can be mixed with other hydraulic brake oils having the same specifications. • It contributes to environmental protection by providing high oxidation resistance and longer service periods in proportion to mineral oils. • It protects the whole equipment against rusting and corrosion, and keeps it clean. • It is compatible with rubber type materials such as hydraulic hose

This top-quality grease is formulated with highly refined mineral oil and thickened with a lithium soap complex, complemented by solid additives. It includes antioxidant, anticorrosive, antiwear, and extreme pressure additives for enhanced performance.

This grease is composed of a highly refined mineral oil with extremely low viscosity, coupled with a basic lithium soap thickener infused with anti-wear and anti-corrosion additives. This unique blend provides outstanding pumpability, smooth flow across a broad temperature range, a minimal friction coefficient, and exceptional adhesion and lubricity.

This grease is composed of highly refined mineral oil and thickened with lithium soap (hydroxystearate). It also incorporates extreme pressure, antioxidant, and anticorrosive additives. Suitable for general lubrication purposes in agricultural and construction machinery as well as automotive equipment. Ideal for lubricating filter bearings, ball-and-socket joints, bolts, and various types of bearings. Recommended for use in pump and agitator bearings.

White Oils are meticulously processed mineral oils characterized by their high level of refinement. They primarily comprise of saturated aliphatic and alicyclic non-polar hydrocarbons. These oils are inherently hydrophobic, meaning they repel water, and possess virtually no color, taste, or odor. Importantly, their color remains consistent and stable over time.

This grease is formulated with highly refined mineral oil and thickened with lithium soap (hydroxystearate). It is further enhanced with antioxidants, anticorrosive agents, and adherence additives. A versatile grease suitable for general-purpose lubrication in various industries, as well as automotive applications including chassis, wheel axles, railways, and public works machinery. Effective within a temperature range from -10°C to 120°C, making it adaptable to a wide range of operating conditions.

This grease is formulated with highly refined mineral oil and thickened with lithium soap (hydroxystearate). It is further enhanced with antioxidants, anticorrosive agents, and adherence additives. A versatile grease suitable for general-purpose lubrication in various industries, as well as automotive applications including chassis, wheel axles, railways, and public works machinery. Effective within a temperature range from -10°C to 120°C, making it adaptable to a wide range of operating conditions

Bio-Hydraulic Oils S Type are hydraulic lubricants that are not only effective but also environmentally conscious. They are composed of biodegradable components, including synthetic fatty esters, stabilizers, anti-wear additives, corrosion inhibitors, and foam inhibitors. These oils meet the stringent biodegradability standards outlined in OECD 301B and adhere to HEES requirements. What sets Bio-Hydraulic Oils S Type apart is their complete absence of mineral lubricating oils. Instead, they rely on high-quality synthetic fatty esters derived from Turkish harvested vegetable oils. Compared to mineral oil-based lubricants, these bio-hydraulic oils are significantly more biodegradable, less hazardous, and well-suited for use in environmentally sensitive areas. They pose a lower risk of harm to soil, waterways, and other environmental components.

Fire Resistant Hydraulic Fluids ISO 46 & 68 have been purposefully designed to serve as substitutes for anti-wear, mineral oil-based hydraulic fluids, especially in scenarios where fire hazards are a concern. These fluids are versatile enough to be applied in environmentally sensitive hydraulic systems without compromising their overall operational efficiency. What sets Fire Resistant Hydraulic Fluids ISO 46 & 68 apart is their composition, which excludes water, mineral oil, or phosphate ester. Instead, they rely on top-notch synthetic organic esters and meticulously selected additives to deliver outstanding hydraulic fluid performance. In fact, they provide lubrication on par with premium anti-wear hydraulic oils and are compatible with hydraulic components from all major manufacturers.

Fire Resistant Hydraulic Fluids ISO 46 & 68 have been meticulously engineered to serve as a reliable alternative to traditional anti-wear, mineral oil-based hydraulic fluids, particularly in situations where the risk of fire is a concern. These versatile fluids can also be effectively employed in environmentally sensitive hydraulic applications without compromising the overall efficiency of the hydraulic system. Distinguished by their composition, Fire Resistant Hydraulic Fluids ISO 46 & 68 are entirely free from water, mineral oil, or phosphate ester components. Instead, they are crafted from high-quality synthetic organic esters and a thoughtfully chosen blend of additives, resulting in hydraulic fluids that deliver exceptional performance. These fluids provide the same level of lubrication quality as premium anti-wear hydraulic oils and are compatible with hydraulic components produced by all major manufacturers.

White oils are meticulously processed mineral oils composed primarily of saturated aliphatic and alicyclic hydrocarbons that lack polar properties. These oils are inherently hydrophobic, meaning they repel water, and they exhibit essential characteristics such as being virtually colorless, tasteless, and odorless. Moreover, their color remains consistent and stable over time, making them ideal for various applications where purity and clarity are essential White oils adhere to or exceed the stipulations outlined in US FDA regulations 21 CFR 172.878 and 178.3620(a), making them suitable for direct contact with food products. They also meet the purity standards established in the British Pharmacopoeia under the monograph “Liquid Paraffin” and the United States Pharmacopeia under the monograph “Mineral Oil.” This compliance underscores their suitability for various pharmaceutical and food-related applications, highlighting their commitment to safety and quality.

POWER STEERING FLUID is a top-quality, mineral oil-based, versatile power steering fluid specially designed for equipment that demands Dexron-type fluids. It delivers dependable friction performance, maintains stability at high temperatures, offers excellent anti-wear characteristics, ensures smooth flow even in cold conditions, and meets the stringent material compatibility standards outlined in current specifications.

Meat And Animal Derivatives (No Less Than 82 % Of Meat and Animal Derivatives In Slices), Including 4% Of Chicken, Sugar Beet Pulp, Minerals, Oils And Fats (Salmon Oil), Various Sugars. Additives (Per 1 Kg Of Product): Taurin: 400 Mg, Zinc (Zinc Sulfate Heptahydrate) (E6): 2,23 Mg, Manganese (Manganese Oxide) (E5): 1,26 Mg, Vitamin A: 2000 IU, Iodine (As Potassium Iodide E2): 0,14 Mg, Vitamin D3: 320 IU, Vitamin B1: 0,6 Mg, Folic Acid: 0,15 Mg.

Mineral oil bottle, volume 3 liter

Mineral oil bottle, volume 5 liter

Mineral oil bottle, volume 4 liter

Mineral oil bottle, volume 1 liter

O-ring threaded sealing plug with Chemical resistant: alcohol, weak alkalis, mineral oils, grease/oils, solvents, fuels. Chemical conditionally resistant: weak acids, water, hot. Light transmittance: opaque.

Thermal conductivity coefficient (X) EN 12665 - W/m.K = 0,032 (-20°C) - W/m.K = 0,034 (0°C) - W/m.K = 0,036 (20°C) - W/m.K = 0,038 (40°C) - W/m.K = 0,040 (+60°C) Water vapor diffusion resistance EN 12086 = µ ≥ 7.000 Classification of reaction to fire EN 13501-1 = B - s2 - d0 Heat resistance EN 14706 = max. +110°C Soluble chloride ion level EN 13468 = 500 pH = 6-8 Flexibility = Perfect Closed cells' percentage = > 90 % Resistance to chemicals (oils, mineral oils) = Good Mold and odor formations = No

Thermal conductivity coefficient (X) EN 12665 -W/m.K = 0,032 (-20°C) -W/m.K = 0,034 (0°C) -W/m.K = 0,036 (20°C) -W/m.K = 0,038 (40°C) -W/m.K = 0,040 (+60°C) Water vapor diffusion resistance EN 12086 = µ ≥ 7.000 Classification of reaction to fire EN 13501-1 = B - s2 - d0 Heat resistance EN 14706 = max. +110 Soluble chloride ion level EN 13468 = 500 pH EN 13468 = 6--8 Flexibility = Perfect Closed cells' percentage = > 90 Resistance to chemicals (oils, mineral oils) = Good Mold and odor formations = No