Welding systems - Import export

Robust and Rigid Body Kuka HR Series Robot High Accuracy Index Table Custom Design Clamping Fixturing Laser Welding Head Fiber or Disk Laser Laser Safe Class 1 Enclosure Customized HMI

Manual application of the laser beam obtained from Lamp Pumped (Nd:YAG) 300w and 600w systems without any automation and fixturing. Practical Accessible Light weight Ergonomical Safe Available with; Nd: YAG Laser. Laser operates only when the operator uses the glasses, and the graphite touches the working material Graphite tips are designable specifically for the welding piece and easy to apply Provides economic solutions as fixturing is not required With its ergonomic design, it facilitates welding application in sections difficult to reach Time assist gas control allows for a cleaner surface to be obtained Multiple fiber path, can achieve energy sharing and time sharing Energy negative feedback laser control technology to achieve consistent welding effect Arbitrary waveform control technology to precisely control welding points formed by each pulse energy.

There are hydraulic pressing clamps in the fixture equipment of system. The workpiece is both made spot welding by means of clamps and prevented distortion due to heat during welding. Separate control lever is used as to be put to rear of piston for each piston.Also there is a pressure relief valve on each control lever. Thanks to pressure relief valves the critical pressure is brought to the desired pressure and the compression of the material in desired strength may be achieved A lock valve is connected to each hydraulic cylinder after the tightening process and during the welding operation, the material is prevented from being retracted and opened due to heat input. Reverse deflexion may be done on the frame thanks to the control units in the clamp mechanisms. 1 inert gas arc welding machine will be used for spot welding process.( it will be supplied by the purchaser)

It’s designed upon you weld cylindrical, conical and rectangle shaped bended frameworks and in shape of flat slab metal sheet and plaque linearly. Frameworks that are between 200-3000 mm diameters can be welded on different types of machines easily. Its production can be made from the length of 0.5 meter to 4 meters. Upon customer demand the length can be increased. As to application method, TIG, MIG and submerged welds can be adapted. Materials’ like boiler, thermosiphon, solar power boilers, cooling tanks, natural gas funnels, lpg tubes etc., height welds are made on this machine.

Turn Table, precisely provide to welding by turning clockwise or counterclockwise of parts connected to it horizontally. It also enable movement in the rotation axis. . The work table is operated with a T-slot turntable to ensure that the workpieces are fully fixed to the work table. It is designed with the aim of increasing efficiency, eliminating the need for welding in difficult positions and considering ergonomics of employees.

EKO circular welding systems are designed for circular pieces’ integration with various welding methods in different positions. It appeals to a wide usage area in which all of the welding techs single and multipass welding tig, mig/mag and submerged welds can be used. It is used in environmental and linear welding of materials like circular formed, boiler, thermosiphon, hydraulic cylinder, conveyor roller, conveyor wheel, solar power boilers etc. It increases output and gain with the savings of materials and time. Upon request, production is made on different diameter, height and features

Industrial welded wires: Galvanized or black iron point welded grid wire system.

PIM 6508 is 8-axis CNC controlled machining center which is specifically designed to process any kind of PVC profiles in the market. The machine can do all operations on four sides of PVC profiles such as milling, opening key holes, water slots, hinge holes, handle holes, marking, saw blade cutting etc. PIM 6508 has the programming feature which provides minimum waste and maximum amount of production. 10 pieces of PVC profiles can be placed on the feeding conveyor of the machine and 3-axis pneumatic gripper moves them into the milling & cutting center for the milling and cutting operations. Operator attaches barcodes on the processed profiles to make them ready for welding operation. Servo control system providing CNC motion at 8-axis Fully automated feeding, carrying, positioning, cutting and transferring units Performing operations on four sides of PVC profiles such as milling, opening key holes, water slots, hinge holes, handle holes, marking, saw blade cutting etc.

Welding process for each corners of Pvc profiles at sime time Welding feature for white and colory profiles Welding feature of 2 x 90 degree with just one process 90 degree easy welding process on moveable working table Full automatic head control system More safety welding pressure and profile pressure adjustment pneumatic fixing/brake system for right corner Mor sentitive welding process by sliding bearings on right welding corner 0.2mm esthtetic finished welding at white and colory profiles Easily changeable single piece tefon sheet wrap Maximum welding strength

The 2Kwelding CBS series of column & Boom Manipulators are specially designed and produced for harsh and rugged area circumstances. Column-Boom Systems are manufactured to ensure ergonomics during weld jointing processes, reaching to hard to access areas while welding large pieces and to perform welding with minimal error.. Column-Boom systems approach to the most suitable area on the piece for performing the required welding process under control of the operatör and welding operation is performed with the command sent to the automatic unit on the boom While Column-Boom systems can perform welding independently for any part, it may also perform circular or lengthwise welding using rotator or positioner. Welding types that can be performed by the system are SUBMERGED, MIG, MAG, TIG. Also, Column-Boom systems can be fixed or with automatic travel on rail.

The 2Kwelding CBS series of column & Boom Manipulators are specially designed and produced for harsh and rugged area circumstances. Column-Boom Systems are manufactured to ensure ergonomics during weld jointing processes, reaching to hard to access areas while welding large pieces and to perform welding with minimal error.. Column-Boom systems approach to the most suitable area on the piece for performing the required welding process under control of the operatör and welding operation is performed with the command sent to the automatic unit on the boom While Column-Boom systems can perform welding independently for any part, it may also perform circular or lengthwise welding using rotator or positioner. Welding types that can be performed by the system are SUBMERGED, MIG, MAG, TIG. Also, Column-Boom systems can be fixed or with automatic travel on rail.

The 2Kwelding CBS series of column & Boom Manipulators are specially designed and produced for harsh and rugged area circumstances. Column-Boom Systems are manufactured to ensure ergonomics during weld jointing processes, reaching to hard to access areas while welding large pieces and to perform welding with minimal error.. Column-Boom systems approach to the most suitable area on the piece for performing the required welding process under control of the operatör and welding operation is performed with the command sent to the automatic unit on the boom While Column-Boom systems can perform welding independently for any part, it may also perform circular or lengthwise welding using rotator or positioner. Welding types that can be performed by the system are SUBMERGED, MIG, MAG, TIG. Also, Column-Boom systems can be fixed or with automatic travel on rail.

Length Welding Machine is designed for length welding of cylindrical, conical and rectangular bent parts and flat plate sheet metal and plates. Parts between 100-3000 mm diameter can be welded on different machine types. The length welding machine, which offers the ability to make welds internally and externally, is produced from 1 meter to 4 meters long. In some special cases, the length may increase even more. Currently, workpieces with a minimum wall thickness of 0.60 mm can be welded. In submerged arc applications, the wall thickness is up to 20-25 mm. Boilers, water heaters, solar energy boilers, cooling tanks, natural gas chimneys, LPG tubes etc. Length welds of materials are made on this machine. Submerged arc, gas metal, tig etc. Welding systems work synchronously with our machine.

Access to the workpiece from the outer surface Installation close to the wall edge Linear welding with walking motion Circular welding on the rotating system Motion transfer with linear slides and trolleys Ability to connect welding machine, oxygen and plasma cutting unit Ability to create special applications and stations