Test systems - Import export

test system for axles, transmissions, gears, transfer cases and shafts The development of rotating components requires intensive testing. While the primary goal may be to achieve strength and life performance, noise, vibration, temperature and other parameters can play an important role for customer expectations. Novosim therefore offers a customizable test dynamometer that can be used in the development of passenger car, commercial, truck or even military vehicle components. The software is easy to use and also highly customizable, allowing different product lines to be tested within a single system. With regenerative braking, power is recovered and returned to the test system, ensuring efficient operation. Considering that tests can last about 1 month, costs can be an important parameter to control costs. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process.

Development of rotating components require intensive testing. While the main goal may be reaching durability and life targets,noise , vibration, temperature and other parameters may play an important role for the customer expectations. Therefore, Novosim offers a customizable testing dynamometer which may be used to in the product development of passenger, commercial, heavy duty or even military vehicle components. Software is easy to use and also highly customizable allowing different product lines to be tested under a single system. With the help of regenerative braking, electricity is recovered and loops back to the test system providing efficient operation. Assuming the tests may run about 1 month, the consumption can be an important parameter for cost control. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process. System automatically generates a report which is also customizable.

Outdoor cabins are produced as cabins, which are preferred in the field of use for GSM and operators. It is used for GSM base station, outdoor field and many other areas against external factors. Creates a protected system. These cabins work as a result of various testing systems. It has many features. Some of them are voltage protection, intelligent control unit, heater, smoke detector, humidity sensor, remote monitoring and remote control. Today it is used and needed in many areas. Advantageous and convenient are the cabins.

Energy consumption, one of the basic cost items, constitutes approximately 80% of total filtration costs. Because of this high rate, using an air filter with high energy efficiency provides cost saving and also reduces the amount of waste, since the replacement frequency is decreased. We utilize the latest EN 779:2012 / ISO 16890 test system to develop new products for market needs, improve performance of existing products and to supply filters in accordance with the design specifications. Through individual testing we guarantee the performance and impermeability (leakproof) by using EN 1822 test standard. All EPA, HEPA & ULPA class filters are delivered with the test certificates.

End-of-Line (EoL) testing devices by Novosim ensure post-production quality checks. They detect visual, auditory, and operational issues, guaranteeing flawless products for customers. Novosim's systems cover rotary systems, automotive components, noise, vibration, and specialized tests. These automated systems use sensors and data devices, with customizable test scenarios stored in a database. Test results ensure prompt approval of compliant products and flag defects, maintaining high-quality standards and customer satisfaction

End-of-Line (EoL) testing devices are used to test the quality of the product after the production process. The purpose of the testing system is to check any visual, audio or other problems that may arise during the installation and assembly of components before they are delivered to customers. Application examples of end-of-line testing systems developed by Novosim include: ​ Rotary systems (transmissions, axles, etc.) Automotive Component Testing Noise and vibration level measurements special systems ​ EoL testing systems are complex systems that generally operate automatically and include a range of sensors, data acquisition devices and testing equipment. Test procedures can be prepared in the form of predefined scenarios by the development team and stored in a database. Different scenarios can be prepared for different test conditions (high speed, low speed, long term, short term, etc.) and then called from the database.

The development of rotating components requires intensive testing. While the primary goal may be to achieve strength and life performance, noise, vibration, temperature and other parameters can play an important role for customer expectations. Novosim therefore offers a customizable test dynamometer that can be used in the development of passenger car, commercial, truck or even military vehicle components. The software is easy to use and also highly customizable, allowing different product lines to be tested within a single system. With regenerative braking, power is recovered and returned to the test system, ensuring efficient operation. Considering that tests can last about 1 month, costs can be an important parameter to control costs. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process.

End-of-Line (EoL) testing devices play a crucial role in assessing product quality post-production. They are instrumental in detecting any visual, auditory, or operational issues that may arise during component installation and assembly, ensuring that only flawless products reach customers. Novosim's end-of-line testing systems cater to a diverse range of applications, including rotary systems (such as transmissions and axles), automotive component testing, noise and vibration level measurements, and specialized testing requirements. These sophisticated EoL testing systems are designed to operate automatically, leveraging a comprehensive array of sensors, data acquisition devices, and testing equipment. They enable the creation of customized test procedures, which are stored in a centralized database for easy access. These procedures can be tailored to different test conditions, accommodating variations in speed, duration, and other parameters.

Test and Drainage Valves / Body: Brass ( Forged ) / Ball : Brass / Gasket : PTFE ** Connection Type: Threaded or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** In sprinkler systems, these valves are used for the testing systems and drain the unnecessary fluids from the systems. Advantages: They have sight glasses in their body,single valve is sufficient to drain the line. For choosing the test and drain valves, users should pay attention to line diameter. Also these valves have to have same diameter with the sprinkler orifice diameter. **** Application areas: The system where has sprinkler systems.

Biological indicators are test systems containing viable microorganisms providing a defined resistance to a specific sterilization process. A biological indicator provides information on whether necessary conditions were met to kill a specified number of microorganisms for a given sterilization process, providing a level of confidence in the process. Biological indicators, depending on the specific type, can be used for various sterilization processes using steam, hydrogen peroxide gas or ethylene oxide. We have the following 4A Biological Indicator types: 4A Steam Biological Indicator (3h) is specifically designed for the monitoring steam sterilization processes at 121 – 134 °C. The final readout of a processed biological indicator with respect to the indicator type should be made after 3 hours (4ARSBI) or 24h (4ASBI) of incubation at 60+/- 2 °C. 4A Ethylene Oxide Biological Indicator (4AEOBI) is specifically designed for the monitoring of ethylene oxide (EO) sterilization processes.

With our expert staff, we test and report your software in accordance with international testing methodologies. - Unit testing - Integration testing - Qualification test - Performance testing - System testing - Admission test