Rolling bearings - Import export

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls. The bearings of the rolls are ductile iron and the arms of the rolls are conical. It is produced with gear drive and belt drive. It can also be produced with an optional touch control screen. Especially thanks to the side covers that can be opened one by one based on the opening system, it provides fast and easy access and the possibility of rapid ball removal with the cover opened on the ball.

SN/SNH housings are the most popular rolling bearing housings on the market, developed to be the first choice in terms of design, quality and economy. They enable combined bearings to achieve maximum service life with less maintenance required. Different housing types and seal designs are available, making the use of special housings virtually unnecessary and allowing cost-effective bearing arrangements. It plays a key role in supporting your bearings, protecting them from contaminants while retaining lubricant, and can also house monitoring equipment.

Aldea BLT 8-3 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 8-14 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-22 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-16 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-12 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 2-18 DN25 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

• It can be easily mounted on a mobile table, table or A050 Stand, • Rolls of different widths up to 40cm can be cut at the same time, • Roll seat has plastic ball bearings for easy rotation of the rolls. • The doublesided, unbreakable blade is longlasting, • On request (optional) Side Shelf Set with Wall Mounting Equipment (A075) can be mounted on either side of this stand. Pen Holder and Display Drawer Included in the Side Shelf Set • All in AISI 304 stainless steel. • Dimension (L x W x H) 513 x 300 x 323 mm • Weight 13 Kg

• It can be easily mounted on a mobile table, table or A055 Stand, • Rolls of different widths up to 60cm can be cut at the same time, • Roll seat has plastic ball bearings for easy rotation of the rolls. • The doublesided, unbreakable blade is longlasting, • On request (optional) Side Shelf Set (A030) can be mounted on either side of this stand. Pen holder and Display drawer are included in the Side Shelf Set. • All in AISI 304 stainless steel. • Dimension (L x W x H) 758 x 300 x 119 mm • Weight 8 Kg

• It can be easily mounted on a mobile table, table or A050 Stand, • Rolls of different widths up to 40cm can be cut at the same time, • Roll seat has plastic ball bearings for easy rotation of the rolls. • The doublesided, unbreakable blade is longlasting, • On request (optional) Side Shelf Set (A030) can be mounted on either side of this stand. Pen holder and Display drawer are included in the Side Shelf Set. • All in AISI 304 stainless steel. • Dimension (L x W x H) 508 x 300 x 119 mm • Weight 6.90 Kg

Expanded Metal Press GMP 1505 EXPANDED METAL PRESS MACHINE Excellent features of CNC Controlled Expanded Metal Machine: Auto Blade gap adjustment, German Made Roll Bearings and Crank Shaft, easy to operate, no waste production, high speed, high precision, varied patterns can be produced, excellent performance. High Speed 195 hits/min Thanks to amazing design and quality of roll bearings and crank shaft design machine can work long hours at high speeds and can produce great amount of job without having to stop for a break. Expanded Metal Machine has achieved advanced technology scientific maturity and practical usage that makes Expanded Mesh from different materials such as Galvanized Steel, Mild Steel, Aluminum and even stainless steel and more... High Speed Expanded Metal Press Machine can make different sizes and shapes patterns of mesh with customized molds.