Low-carbon - Import export

310 quality is designed to withstand high temperature service. Despite this feature, material softness and weldability are quite good. It can operate continuously at 1150 degrees and does not rust. It can operate intermittently at 1040 degrees. Like other austenitic grades, it has excellent toughness. The 310S quality is resistant to high temperatures both in moist and dry environments. The low carbon content of the 310S allows it to withstand temperatures less than 310 does.

316 quality is the best known stainless steel after 304, the biggest difference is containing molybdenum (Mo). Molybdenum (Mo) 316 is better resistant to corrosion in corrosive environments than 304, it is especially good against cracks and pits in the surface and interior structure. Its shaping and welding capability is high. It can be used for various purposes in sectors such as industry, architecture, transportation. It does not require post-welding annealing for thin sections. 316L is the low carbon version of 316. Therefore, it does not require post-welding annealing for thick sections of 316L. 316Ti contains a small amount of titanium (Ti), the ratio is around 0.5%. The greatest advantage of this quality in the other two qualities is that it has a longer strength at high temperatures.

ECU 99,9 % : Electrolytic is used as copper material with a conductivity of 58, electrode in erosion, high-low current panel and busbar in substations. Among our standard products: Rod, Sheet Plate, Straight pipe, Tube Coil, Box profile, Grounding rod - plate, Roofing, Copper fittings and thin wires. Also, sheet plate measurements which do not have a standard are brought to necessary measurement by forging at desired dimensions. Parts that require CU-Cr-Zr (Chromium alloy) High electricity conductivity, hardness and strength at high temperatures: Are used as point welding electrode and seam welding disc at the source of low carbon steels (Panel radiator, Gasoline warehouse, etc.) and Galvanized steel plate (Automotive and white goods), electrode holder at spot welding machines, plunger electrode at erosion machines and contact busbar at substations.

EN 1561 / Gray (Flake Graphite): EN GJL 100, EN GJL 150, EN GJL 200, EN GJL 250, EN GJL 300, EN GJL 350 EN 1563 / Nodular (Spheroidal, Ductile): EN GJS 350 22, EN GJS 350 22 LT, EN GJS 400 15U<30mm, EN GJS 400 18, EN GJS 400 18 LT, EN GJS 400 18U, EN GJS 450 10,EN GJS 500 7, EN GJS 600 3, EN GJS 700 2 as cast & normalized, EN GJS 700 2 hardened & tempered, EN GJS 800 2 as cast & normalized, EN GJS 800 2 hardened & tempered, EN GJS 900 2 as cast & normalized, EN GJS 900 2 hardened & tempered EN 1562 Malleable : Blackheart, Pearlitic, Whiteheart ALLOY CAST IRONS Austenitic :Flake Graphite , Nodular Graphite High Silicon White Cast Iron :High Chromium, Low alloy, Nickel-Chromium CARBON STEELS Low Carbon Steels Medium and High Carbon Steels ALLOY STEELS High, Medium and Low Alloy Steels STAINLESS STEELS Ferritic, Martensitic, Austenitic, Duplex, Precipitation Hardened

The spiral welded steel pipe is a low-carbon structural steel or a low-alloy structural steel strip, which is wound into a tube blank with a certain helix angle (also called forming angle), and then welded and formed into a pipe joint, which can use a narrow strip. We strongly recommend the use of steel spiral hoses in various construction fields, especially in shaft shafts (ventilation, lift shafts, etc.). The areas of use of spiral pipe and steel spiral pipe are different. Steel spiral pipes are used in cables in areas that may be subjected to loads and impacts.

AVAILABLE STEEL GRADES: DIN: ST37-2 / ST44-2 / ST50-2 / ST52-3 U / ST52 N / ST60-2 / ST70-2 EN: S235Jr / S275Jr / E295 / S355Jr / S355J0 / S35522/ E335 / E360

Annealing is a heat treatment process that actually changes the physical and chemical properties of the wire. This is what causes durability and increased ductility while making the wire easier to work with too. Normalization and global annealing are performed: Construction industry – mainly for iron setting in the civil construction field Handicrafts Packaging of products – used as tie wire Silk weaving hay bailing in the agricultural field Fencing products including barbed wire Screw and bolt manufacturing PRODUCT STANDARD EN 10218 QUALITY & RAW MATERIAL SATNDARD EN 10263-1,EN 10263-2 EN 10263-3 EN 10263-4 standarts of SAE 1008, SAE 1006, SAE1018 20MNB 4, CQ 15, QST36 DIAMETERS Ø 1,00 mm - Ø 30,00 mm PACKAGING 50 to 1000 kg coils

Straightened and cut wire is produced from coils by means of special machinery which straightens the wire and cuts it to specific lengths. We can straighten and cut any wire product that we manufacture, as well as straighten and cut wire that you already own. We maintain our arrow straight precision cut tolerances and lengths to satisfy your every specification. MATERIAL Low carbon and high carbon steel wires, annealed steel wires, galvanized steel wires, bright steel wires, phosphated steel wires PRODUCT STANDARD TS 5287 EN 10218 QUALITY & RAW MATERIAL STANDARD TS 2348- DIN EN 10016 (SAE 1006-1008-1010),DIN EN 10216, 10217,TS 5287-2 EN10263-2 DIAMETERS Ø 2,00 mm - Ø 10.00 mm LENGTH 100 mm - 3000 mm PACKAGING 20 kg up to 1000 kg in bundles

DEMIRSAN manufactures low and high carbon wire for sophisticated applications, as well as a specific range of steel wire ropes. These products comprehensively cover the diverse requirements of a specialized customer base. Bedding and seating wire, spring steel wire, high carbon weaving wire, crimped wire, haulage rope. PRODUCT STANDARD TS 2500 EN 10270 QULAITY & RAW MATERIAL STANDARD TS 2348 EN 10016 WIRE RODS SAE 1045, SAE 1050, SAE 1055, SAE 1060, SAE 1065, SAE 1070, SAE1075, SAE1080, SAE1083, PC1080, PC 1083 DIAMETERS Ø 0,70 mm - Ø 16,00 mm QUALITIES Quality A - (SL) Quality B - (SM) Quality C - (SH) PACKAGING 50 kg to 250 kg coils, 800 kg to 1000 kg metal coiler

Neelam Forge is one of India's driving producers of excellent Stainless Steel 304 Flanges. As an acclaimed undertaking of the business, Neelam Forge is incorporated into offering an inconceivable bunch of Stainless Steel 304L Flanges as a producer, exporter, stockiest and provider to our family unit and overall clients. Stainless Steel 304L is the low carbon version of 304.