Fences and gates - Import export

It is a type of door that can be preferred for wider openings, with larger wing material sections. In this product, there is a rail on the floor only in the passive area and there is no problem that will prevent the passage of vehicles in the active area. It has the appropriate infrastructure for the installation of electronic lock systems.

It is a type of gate that has the ability to be connected directly between fence posts, allows two wings to work on top of each other if necessary, and does not require a movement bollard, reducing the passive area by ½. It has a structure that can cover openings up to 2.00 m in one direction. It can be applied as double or single direction.

It is a type of door in which the door leaf, which is connected by consoles between bearing groups placed on vertical and horizontal axes, performs a linear opening. The absence of a rail on the floor provides a problem-free working environment for forklifts and similar vehicle entries. It has the appropriate infrastructure for the installation of electronic lock systems.

The outstanding feature of this product, which has a compact structure with the case located outside the wing, is its impressive structure with its ease of installation. Possible negative effects of wing weight caused by the increase in section are balanced by the chassis.

It is a type of gate that uses fence posts as bollards and consists of only a wing and a top bar. Its lightweight structure both creates economy and provides efficient physical work. Its other advantages include being easy to install and providing the infrastructure for lock installation. The fact that the top bar assembly transforms the fence posts into a door frame in a sense brings about a stable operation.

These are special solutions applied for secondary areas. Conveyor bottom covers are a good example of such applications.

These are the productions that provide field or field entry and exit in both continuous systems and local systems. They can be manufactured in circular or linear opening format.

These are additional products developed for extraordinary uses.

These are assembly methods developed for unusual surfaces and uses.

These are materials developed for cabling. It is manufactured from 0.70 mm thick sheet material.

It is a mounting material used to mount BLB and CVB Type Security panels at desired angles.

It is a material used when a window is desired to be opened anywhere inside the panel. With this method, it is possible to reach the machine body or control the button of an electrical panel. What you need to do is to open a hole of the desired size in the wire on the panel with a pair of strong pliers or wire cutters and then wrap the elastic frame band (wick) around this gap. In this way, possible injuries are prevented.

Users may often want one or more security panels to be easily removable. Essentially, all systems are generally detachable, but when, for example, a panel in a sensitive area needs to be dismantled in a shorter time than normal and without the use of tools for emergency response, finding a solution for that process is important. There are a number of solutions developed for such requirements, and it is possible to further develop such solutions specifically and according to needs.

It is the profile that protects people from the sharp and dangerous parts of BT Panels. It is mounted with smart screws during the application phase.

These are systems where DT panels are mounted on poles in their bare form. In these panels, flexing and oscillation are within acceptable limits due to their structure, which makes it possible to use the panel directly without enclosing it in a frame. While double type normal mesh panels are the standard material type that can be preferred for these types of applications, it is also possible to develop options for the material with smaller mesh sizes than normal. In this type of machine security fences, it is possible to cut and size the panels during application, and this feature brings application flexibility.

These are systems where BT panels are mounted on poles in their bare form. In these panels, flexing and oscillation are within acceptable limits due to their structure, which makes it possible to use the panel directly without enclosing it in a frame. Unlike when used outdoors, panels produced with a mesh size of 50*50 mm are more preferred in such applications. In this type of machine safety fence, the panels can be easily cut and brought to the desired dimensions during application, and the economy of being frameless creates advantages in terms of budgets, but it cannot be said that it complies with the Machine Safety Regulation in every aspect. The ordering process takes less time for this type of security panels, which do not require precise measurements in terms of application.

It is a self-standing system where bolt holes are opened for panel connection apparatus on poles, providing easy installation and economy. Protective structure distance standards are taken into account for system height. In the requests that come to the agenda, the process starts with the application made on the plan, the use of standard panels is given priority in the application and the panels to be produced in intermediate sizes are determined, and the work is put into production after the customer's approval. For jobs that have not yet been designed, on-site exploration is carried out and appropriate project planning and installation are carried out.

These are machine safety fences where the poles are connected to the feet during assembly, in order to tolerate possible ground level differences. In this system, bolt holes are opened in the poles for the panel connection elements, creating ease of installation. Protective structure distance standards are taken into account for system height. In the requests that come to the agenda, the process starts with the application made on the plan, the use of standard panels is given priority in the application and the panels to be produced in intermediate sizes are determined, and the work is put into production after the customer's approval. For jobs that have not yet been designed, on-site exploration is carried out and appropriate project planning and installation are carried out.

It is a high security model with 6000 joule impact resistance. Compared to the standard BLB model, the pole, panel frame material and fence wire wall thicknesses are higher; fence wire mesh spaces are smaller. BLB brackets are used to mount the poles to the panel. The system height complies with the protective structure distance standard. The application process of the BLB-YG model begins with the application on the plan. Priority is given to the use of standard panels. Panels to be produced in intermediate sizes are determined. The studies are submitted to customer approval. Production is started after approval is received. For customer demands that have not been projected, first an on-site survey is carried out, then a suitable project and assembly are made.

These are machine safety fences where safety panels are connected between self-flanged poles using specially produced connection apparatus. Protective structure distance standards are taken into account for system height. The process for possible applications starts with the application made on the plan, priority is given to the use of standard panels in the application and panels to be produced in intermediate sizes are determined, and the work is put into production after customer approval. It is a product with 2107 Joule Impact Resistance Test Certificate. For jobs that have not yet been designed, on-site exploration is carried out and appropriate project planning and installation are carried out.

These are machine safety fences where the feet, which have the function of eliminating possible ground level differences, are connected to the poles during assembly, and the safety panels are connected to the poles using specially produced connection apparatus. Protective structure distance standards are taken into account for system height. The process for applications starts with the application made on the plan, priority is given to the use of standard panels in the application, panels to be produced in intermediate sizes are determined, and the work is put into production after customer approval. For jobs that have not yet been designed, on-site exploration is carried out and appropriate project planning and installation are carried out.

Our company currently produces panels in special sizes (as required by the application). Although this preference delays the delivery time a little, it is undoubtedly important in terms of the solution it offers. However, the user can also create his own custom-sized panels by cutting them from standard panels. The material in question was produced for this purpose and the stages of the process are included in the panel details.

It is a L/U profile record with telescopic feature that is connected from panel to panel if necessary.

It is a product that meets the needs in its field with its wing connected to the horizontally placed rail on top and other components that help the wing to operate linearly. The fact that the active area does not contain any elements that hinder the transition affects the preferences positively. It has the appropriate infrastructure for the installation of electronic lock systems.

It is a sliding gate type that has the ability to be directly connected to fence posts, consists of a wing, upper and lower rails and a mechanical control panel. It can be applied in openings up to 1.50 m.

Unikabin is a cabin system designed with the aim of creating a structure that enables user assembly, where facade panels can be connected to each other without any poles. Uni cabins can be applied as single or multiple, the standard panel height in cabins designed as warehouses is 2000 mm. It is suitable for creating independent storage areas for residents of residences, apartments and sites.