Results for
PERGEL METAL
Turkey
Spot welding is different from other types of welding. There is no need to use any extra material. Two grains of metal are boiled by a classical method. Fusion is achieved by melting. The process of punting is as simple as that. Spot welding can also be called a resistance welding process. When welding, an electric current is used. Sometimes it is made using two, and sometimes more than two metals. Both pressure and heat are applied. The electrodes are copper-alloyed and are used by interacting with the metal surface. This resource is most often used in the automotive industry. It is a resistance welding process.
Request for a quoteEAE ELECTRIC
Turkey
Lighting Busbar Systems (25A,32A & 40A)E-Line DL/SL group Busbar Trunking Systems are used in lighting circuits that require single phase or three phase electrical current in buildings and industrial facilities. 10A / 16A output plugs (with and without cartridge fuses) are designed to supply lighting circuits according to their characteristics.
Request for a quoteEAE ELECTRIC
Turkey
Lighting Busbar (25A up to 32A) E-Line KAM Series Lighting Busbar Systems has been designed to supply lighting fixtures with electrical current. It can be used to supply power to industrial, decorative or alternate lighting fixtures.
Request for a quoteEAE ELECTRIC
Turkey
Lighting Distribution Busbar (25A - 32A)E-Line DL/SL group Busbar Trunking Systems are used in lighting circuits that require 25 A and 32A single phase or three phase electrical current in buildings and industrial facilities. 10A / 16A tap off plugs (with and without cartridge fuses) are designed to supply lighting circuits according to their attributes.
Request for a quoteEAE ELECTRIC
Turkey
Cast Resin BusbarBusbar trunking systems (E-Line CR Busbar: Cast Resin Busbar) provides the transfer and distribution of electrical current between 630A and 6300A. Explosion proof protected and compatible with E-line KX busbar modules. IP 68 protection class. The "DUROCOMP" synthesized material which has a high temperature and mechanical working strength composed of specially selected pure silicon minerals and epoxy resin, thereby protecting the E-Line CR busbar from external impacts.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ARSLAN METAL SANAYI VE TICARET A.S
Turkey
Aluminium Bus Bars for power distribution give an economic advantage compared to copper bars due to the lower cost of aluminium and to a significant difference in the weight / volume.In fact aluminium bars weigh up to 70% less than copper bars, compared with a reduction in electrical capacity of only about 30%.The use of aluminium bars for carrying electrical current is therefore recommended in switchboards, distribution equipment and systems where there are no space problems, or where weight reduction is critical.Aluminium bars with different corners are available with many Thickness and many lengths.
Request for a quoteINCI PREFABRIC & CONTAINER
Turkey
What is Solar Energy Systems? Solar energy systems; It is a system in which solar rays are collected by panels or solar cells and converted into electrical energy. Solar energy panels are a very budget-friendly system in the long run. And it's pretty easy to use, set up, too. The main source in our system is the sun, the energy production cycle is completed when the rays from the sun hit the solar panels and pass through various stages. On the surface of the solar panels used in these systems - photovoltaic panels - there are many solar energy cells. These solar cells, on the other hand, are composed of silicon material, which is abundant in nature, and there are two layers, positive and negative, in order to create electric current in each energy cell. With the absorption of the rays emitted by the sun by these cells, a continuous flow of electrons occurs, resulting in electricity production. Solar energy systems are classified in two different ways as On Grid and Off Grid.
Request for a quoteDENMAK MAKINA LTD STI
Turkey
RPM 200 is refractory and concrete spraying machine for light coating applications with reduced operating costs can easily handle all types of concretes containing different sizes and shapes of aggregates, gravels, crushed gravels, and pebbles up to 16mm in diameter. The machine has 2 cubic meters spraying capacity per hour. Improved rotor geometry, high quality steel and rubber plates reduce operating costs due to low electricity and air consumption. Its specific oiling system lengthens the life of rubber and steel plates by reducing mechanical wears. Due to the ease of spare part replacement, it doesn’t require any qualified personnel or any calibration or adjustment to be done afterwards. RPM-200 has remote control system and waterproof electrical panel to prevent current leakage and provide safety to the operator. Phase sequence protection, high and low voltage protection, high current flow protection and thermal protection. RPM-200 can be used in low ceilinged and narrow spaces.
Request for a quoteResults for
Electric current - Import exportNumber of results
9 ProductsCountries
Company type