Axles - Import export

Ford axles.

The development of rotating components requires intensive testing. While the primary goal may be to achieve strength and life performance, noise, vibration, temperature and other parameters can play an important role for customer expectations. Novosim therefore offers a customizable test dynamometer that can be used in the development of passenger car, commercial, truck or even military vehicle components. The software is easy to use and also highly customizable, allowing different product lines to be tested within a single system. With regenerative braking, power is recovered and returned to the test system, ensuring efficient operation. Considering that tests can last about 1 month, costs can be an important parameter to control costs. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process.

Fullgear FD 80W-140, is an construction agricultural vehicles gear oil which is developed with quality base oils and advanced technology additives for limited slip (LS) differentials, wet brake system axles and final drive units. Extreme Pressure (EP) additives in its formulation provides effective wear protection even under high stress.

Fullgear HYP Plus 85W-140W, is a automotive gear oil that is specially developed for axles and differentials of heavy duty vehicles where API GL-5/MT-1 and SAE J2369 performances are required. Its special formula provides effective wear protection under high speed and high load.

Fullgear FD 20W-40, is an construction vehicle gear oil which is developed with quality base oil sand advanced technology additives for limited slip(LS) differentials, wet brake system axles and final drive units.

NEWHOLLAND COMBINE HARVESTER SPARE ALL PARTS

PULLEY BED BEARING MIL DISC HOUSING FLANGE HUB BOX BEVEL PINION ANGLE DRIVE COVER RIM FINGER NUT BOLT FINGER KNIFE PIN .....

This system is very valuable for testing the durability and expected life of the transmissions, axles, gears, transfer cases and shafts under various scenarios. It is hard to do vehicle level durability tests and without the need of getting the vehicle on the road for replicating claims caused by the powertrain, such type of a custom system help replicate the driving conditions where problems occur and the engineering team can develop a solution and iterate on the bench. Easy to use user interface; simplicity in get the system running in a target time is our most important goal. Operators in a test center can quickly receive training and begin running a variety of scenarios. Data from low speed channels such as sensors including thermocouples, RTD temperature sensors, pressure sensors and others can be collected whereas data from fast channels such as acceleration or microphone are collected through data collection (DAQ) systems, depending on the customer's preference.

test system for axles, transmissions, gears, transfer cases and shafts The development of rotating components requires intensive testing. While the primary goal may be to achieve strength and life performance, noise, vibration, temperature and other parameters can play an important role for customer expectations. Novosim therefore offers a customizable test dynamometer that can be used in the development of passenger car, commercial, truck or even military vehicle components. The software is easy to use and also highly customizable, allowing different product lines to be tested within a single system. With regenerative braking, power is recovered and returned to the test system, ensuring efficient operation. Considering that tests can last about 1 month, costs can be an important parameter to control costs. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process.

Development of rotating components require intensive testing. While the main goal may be reaching durability and life targets,noise , vibration, temperature and other parameters may play an important role for the customer expectations. Therefore, Novosim offers a customizable testing dynamometer which may be used to in the product development of passenger, commercial, heavy duty or even military vehicle components. Software is easy to use and also highly customizable allowing different product lines to be tested under a single system. With the help of regenerative braking, electricity is recovered and loops back to the test system providing efficient operation. Assuming the tests may run about 1 month, the consumption can be an important parameter for cost control. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process. System automatically generates a report which is also customizable.

Accelerate your product development cycle with our Test Dynamometer service. Our system enables accelerated testing of transmissions, axles, gears, and other rotating elements to identify potential issues early in the development process. With fast data collection and intuitive user interface, we help you iterate quickly and efficiently. Key Features: Accelerated testing for faster product development Comprehensive data collection from low-speed and fast channels Quick setup and execution of test cases Expert support and training for test center operators

Chrome Double Disc Double distributor hydrolic system Openable screen 2 functional tent with mechanism that can be opened 0/180° Electric and phosphorus reflector Steel font railing bariers Shaft Brake and movable articulated wheel 18-24 disc Rear plastic tow bar Easy to remove and assemble additional attachment Corner fitting zipka bolt

ACB-195 H is a hydraulic drum mower that used to mow or cut Meadow and Grass with the high speed of blades which located in the drums. This machine has 2 drums and 6-8 baldes, and high quality cutting helps to keep nutrient values of grass and meadow and and provides the possibility of drying in a very short time. This model has a hydraulic system that helps the machine to move up after the work finish.

1000 Kg Hay Capacity, 2 Axle, Hay Container AOT 508 trailer is produced in the form of a double-axle closed sheet metal body. The trailer has a middle lift and is used to transport hay and silage.Axles are closed hub system and do not need lubrication when making hay and silage. The trailer is connected to the tractor from behind and pulled with the appropriate speed limit.

Double chopping forage harvesters are perfectly fit for the silage of all green forage plants. You can store these types of plants in the ideal sizes after cutting with the double chopping forage harvesters. The moving blades of double chopping forage harvesters made of special steel reduce the fractures to minimum by throwing back the hard objects that interrupt during the mowing process. Also produced from very special steel, the chopping blades cut the material and mow for the second time in order to obtain the healthy silage size.

It is used for loading and unloading cotton bales.

The log holder attachment differs for different materials.

With this type of attachment called bigbag, l oading and unloading of large sacks can be done easily.

Forklift Fork is 2 Models; 1. Adjustable Fork Fixed Model: Fork spaces can be manually narrowed and opened to fit under pallet space. 2. Adjustable Fork Sliding Loading Model: As in the 1st model, the fork gaps can be narrowed and opened manually to fit the under-pallet space, and different loads can be shifted 9 cm to the left - 9 cm to the right by a lift.

It is specially produced for high stacking of square type bales between 250 and 500 kg. Together with the front loader, the skewer tip can stack up to 560 cm high.