Valves - Import export

Straight Radiator Valve / Straight Return Radiator Valve / Straight PX-B Radiator Valve / Straight PX-B Return Radiator Valve ** / Body : Brass (CW617N) / Body Type : Straight Type / Handwhell : Ebonite - Plastic (ABS) / Gasket : No, Optional / Max. Working Temp. : 120 ºC / Max. Working Pressure : 10 Bar *** Application Areas : Hot and Cold Water Systems

Body and Cover : GG-25 Cast Iron / Handwheel: GG-25 Cast Iron / Gasket: EPDM / O-ring: EPDM / Spindle: Stainless steel / Segment Gear : GG-25 Cast Iron . ** Connection Type: Flanged / Working Pressure :175-300 PSI / Working Temp.:-10ºC , + 120ºC / Working Test Pressure : 600 PSI *** NRS gate valve is developed to be used as the cut off and zone control valves in order to substitute supervisory switched butterfly valves and OSY rising stem valves in the fire security systems. These valves are usually burried underground to prevent the risk of freeze. Just to make them visible and traceable inside the systems, they are preferred to be used with post indicators instead of wheels. **** Application Areas: In fire fighting systems, which is non-affected by freeze, than they are using under the soil.

Body and Cover : GG-25 Cast Iron / Handwheel: GG-25 Cast Iron / Gasket: EPDM / O-ring: EPDM / Spindle: Stainless steel / Segment Gear : GGG-40.3 Ductile Iron. ** Connection Type: Flanged / Working Pressure :175-300 PSI / Working Temp.:-10ºC , + 120ºC / Working Test Pressure : 600 PSI *** OS&Y gate valve is developed to be used as the cut off and zone control valves in order to substitute supervisory switched butterfly valves in the fire security systems. Just to make them visible and traceable inside the systems, they are preferred to be used with post indicators instead of wheels. **** Application Areas: It can be use in every fire fighting systems, but it usually use in water tank and in front of the pumps.

Body: ASTM A-536 Cast Iron / Valves : Bronze Surface covered with Teflon, Stainless steel Trim Set / Pilot control valve and system: Bronze ASTM B62 and Stainless steel 303 inner parts ** Connection Type: Flanged / Pressure :16-25 Bar / Working Temp.: +4ºC , + 80ºC *** This valves using for the preventing damages which cause from the pressure in fire pump systems. Generally fire protection systems use the diesel pumps and electrical motors. In that systems relief valves are preferred. **** Application Areas: In systems which has diesel or electrical high pressure fire fighting pumps.

Test and Drainage Valves / Body: Brass ( Forged ) / Ball : Brass / Gasket : PTFE ** Connection Type: Threaded or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** In sprinkler systems, these valves are used for the testing systems and drain the unnecessary fluids from the systems. Advantages: They have sight glasses in their body,single valve is sufficient to drain the line. For choosing the test and drain valves, users should pay attention to line diameter. Also these valves have to have same diameter with the sprinkler orifice diameter. **** Application areas: The system where has sprinkler systems.

H Valve (Straight Type- Px-B Pipe Connection) / Drain Cock For Manifold TEE ** / Body : Brass (CW617N) / Body Type : H Type- Straight / Connection Type : Threaded / PX-B Pipe connection / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems

Angle Radiator Valve / Angle Return Radiator Valve / Angle PX-B Radiator Valve / Angle PX-B Return Radiator Valve / Chrome Coated Radiator Valve ** / Body : Brass (CW617N) / Body Type : Angle Type / Handwhell : Ebonite - Plastic (ABS) / Gasket : No, Optional / Max. Working Temp. : 120 ºC / Max. Working Pressure : 10 Bar *** Application Areas : Hot and Cold Water Systems

Disco Check Valve / Wafer Type ** Body : MS 58 Brass - From( DN15-DN100) / Ductile Iron (EN GJS 400-15) - From (DN125-DN200) / Spring, Disc, Centering : Stainless Steel / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar / Connection Flanged- Wafer Type *** Applications Area : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids / Liquid Fuel Systems

Double Plate Check Valve / Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron (EN GJS 400-15) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : Hot and Cold Water Systems / Irrigation and Water Supply Lines / Purification System and Waste Water Discharge / Fire Protection Lines / Oil- Cooling Cycles

Angle Radiator Valve Eco – (Pex-B)

Full Bore Brass Ball Valve For N.Gas

Desing Size : VARNASAN Connection: DIN 259 BSP ve NPT Actuator Adaptation : ISO 5211 Technical Features Working Pressure : PN16 - PN40 Working Temperature: -300C / + 1800C Usage: Actuator connected and handle option Certificate CE0036, TS EN 10204 3.1 Application Corrosive fluid (acid, base), pharmaceutical raw materials, food, plastic etc.

Exhaust gas bypass systems are made as additional equipment in exhaust gas heat exchangers. 3-way flap is required for bypass systems. By-passing the gas flow makes it possible to adjust temperature inside boiler (exhaust gas heat exchanger). Before delivery, we do a thorough test drive for every single damper, using actuator and special measurement equipment, to make sure that they function as expected and are ready to serve reliably on site. Availaible in steel, stainless steel or heat resistant materials Flange type and size depending on customer needs We develop dampers in different sizes and various temperature ranges Actuator options; Pneumatic actuator, Electrical actuator

We do valve application on our pouches as well.

Brass Ball Valve For Drinking Water - PN10 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Body Type : Long Type / Max. Working Temp. : 120 ºC / Max. Working Pressure : 10 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron+ Nickel Coated / Handwheel : Ductile Iron+ Nickel Coated / Shaft : Stainless Steel / Gasket : EPDM-NBR-PTFE-VITON / Connection : Flanged (Lug Type) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : HVAC Systems / Water Treatment Systems / Paper Industry / Fresh Water System

Angle Thermostatic Radiator Valve / Angle PX-B Thermostatic Radiator Valve / Straight Thermostatic Radiator Valve ** / Body : Brass (CW617N) / Body Type : Angle & Straight Type / Handwhell : Ebonite - Plastic (ABS) / Gasket : No, Optional / Max. Working Temp. : 120 ºC / Max. Working Pressure : 10 Bar *** Application Areas : Hot and Cold Water Systems

Body: ASTM B-536 Nylon- 11 Coated / Gear Box: ASTM A-536 / Disc: ASTM B-356 EPDM Encapsulated / O-Ring: EPDM / Handwheel: ASTM A-536 / ** Connection Type: Flanged or Grooved or Threaded / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** It is identified as a local control valve. It is used as a shut-off valve on water feed lines to disconnect (control) in-situ zones. A butterfly valve or rising stem valve is used to shut off or control. the position of all valvesused in fire systems should be visible and electrically traceable. Butterfly valves are of a gearbox handwheel type. The supervisory switch of a butterfly valve are located inside the valve and there is an on/off indicator on it. **** Application Areas:Residences / Hotels / Hospitals / Business Centers / Shopping Centers

PN10/PN16 GATE VALVE / Elastomer & Metal Seated ** Body- Cover : GGG-40.3 Ductile Iron (EN GJS 400-15) Disc : Ductile Iron + Rubber Coated Handwheel : GG-25 Cast Iron (EN GJL 250) Gasket : EPDM / NBR Connection : Flanged Max. Working Temp. : 70 ºC Max. Working Pressure : 10-16 Bar *** Applications Area : Hot and Cold Water Systems / Non-acidic and non-flammable liquid fluids

Brass Ball Valve PN16-PN25 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Body Type : Short- Long Type / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16- 25 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Diaphragm Safety Relief Valve (M-F) DN15-DN25 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Type : Vertical Type / Max. Working Temp. : 120 ºC / Max. Working Pressure : 3,4,5,6,7,8,9,10 Bar *** Application Areas : Hot and Cold Water Systems

Brass Check Valve ( Vertical Type - Swing Type) ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Body Type : Vertical & Swing Type / Disc : Polymer Plastic For Vertical, Brass For Swing / Max. Working Temp. : 90 ºC / Max. Working Pressure : 10-16 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Brass Safety Valve (Straight & Corner) ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Body Type : Straight - Corner Type / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Mini Ball Valve (Male- Female) / Ball Valve with Union ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Body Type : Mini / Union / Max. Working Temp. : 120 ºC / Max. Working Pressure : 10- 16 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Water Tap / Ball Valve with Pipe Connection DN15-DN20 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Type : Tap type / Max. Working Temp. : 80 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems

Brass Valve with Drain / Brass Ball Valve with Drain ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded (FF) / Type : Drain Type / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids