Control switches - Import export

A graphic overlay may be the first thing your customer or end user sees when interacting with your product. It must be durable, attractive, and functional. Thanks to our graphic overlay printing expertise, Stil Elektronik , can manufacture your custom graphic overlay in a variety of shapes, sizes, and materials to ensure durability. In fact, with sub-surface graphics, printing is done on the inside of the overlay, so your overlay’s graphics won’t degrade from use or cleaning. Stil Elektronik , offers a variety of overlay materials with thickness ranging from 7 mil to 30 mil. Selecting the graphic overlay material depends on the end user application and the environment in which it will be used, including exposure to sunlight and chemicals. Cost is also a consideration. Polycarbonate and polyester are the most commonly used materials for graphic overlays.

In addition to certain standard productions, Occupancy Sensor is successfully manufactured by us in different ways.

Crosswise Dimension (DS) / External Dimensions (E) / Screening Dimensions (V) / Active Dimensions (A)

Stil Elektronik combines electroluminescent technology with membrane switch technology and brings it into use in the areas where homogenous lighting is needed, for several industries such as machinery, security, marine electronics, automotive, marketing etc. Electroluminescent technology is technically and visually better than the LED technology and it works properly in all kind of condition and temperature. It has 4 different colors as standard. On the other hand it is possible to brighten the printings by using transparent paints, in case of demand of different colors. There can be various colors on one panel as well one color too.

Electroluminescent means “Cold Radiation” working with electrical high frequency. There is no resistance or filament directly in this technology. Electroluminescent only lights up with “High Frequency”. For this reason, Electroluminescence is called Cold Radiation. Although Electroluminescent takes the name cold radiation, Electroluminescence emits very little heat (25 degrees) outside. Electroluminescence never burns the hand that can be touched. Electroluminescent need Inverter, which is a kind of transformer, to make the light. With “high frequency” electrical energy supplied by INVERTER, it strikes the barrier between the pressures and gets stuck, FOSFOR, which cannot find a place to escape, thus emerges as LIGHT.

In this type of production, we can also perform electroluminescent lighting application and LED lighting application. In this type of production, ITO Film is used and production can be made by etching method or silver conductive printing method. Since the structure of ITO is permeable to light, our customers generally prefer ITO in illuminated capacitive circuit structures.

On this type of product; There is embossing on the surface and the backside is folded with glue. The key areas are enhanced by embossing and it is produced with metal dome according to the usage of customers.

On this type of product; There is embossing on the surface. The short circuit is done between silver and metal dome. Surface mount LED’s are used which has high intensity of light, able to lighten in 90 and 180 degree, have transparent and opaque colors.

On this type of product; there is no embossing on the surface. The short circuit is done between silver switch and metal dome. Surface mount LED’s are used which has high intensity of light, able to lighten in 90 and 180 degree, have transparent and opaque colors.

On this type of product; both switches are silver, The embossing is done on graphic panel and so it provides sense of touch on switch. Surface mount LED’s are used which has high intensity of light, able to lighten in 90 and 180 degree, have transparent and opaque colors.

On this type of product, the switch type is designed as flat. Short circuit is provided with silver switch. Surface montaged LED’s are used which has high intensity of light, able to lighten in 90 and 180 degree, have transparent and opaque colors.

On this type of product; there is embossing on the surface. The short circuit is done between silver switch and metal dome.

On this type of product; no embossing is made on the surface. The short circiut is done between silver switch and metal dome.

Smart Control with DSP Technology, Thyristor Controlled Switching, Automatic and Manual Transfer, Seamless Transition, Adjustable Box Contacts, ModBus Protocol - RS232, RS485, Retransmission Delay Prevention, Auto Start and Failure Recovery, Intelligent Diagnostics, System Measurements (Voltage, Current, Frequency etc.), Visual and Audible Alarms, AC Failure, Over Temperature and Short Circuit Protection

Smart Control with DSP Technology - Thyristor Controlled Switching - Automatic and Manual Transfer - Seamless Switching - Adjustable Box Contacts - ModBus Protocol - RS232, RS485 - Retransfer Delay Prevention - Automatic Startup and Fault Recovery - Smart Fault Diagnosis - System Measurements (Voltage, Current, Frequency etc.) - Visual and Audible Alarms - AC Failure, Over Temperature and Short Circuit Protection

Smart Control with DSP Technology - Thyristor Controlled Switching - Automatic and Manual Transfer - Seamless Switching - Adjustable Box Contacts - ModBus Protocol - RS232, RS485 - Retransfer Delay Prevention - Automatic Startup and Fault Recovery - Smart Fault Diagnosis - System Measurements (Voltage, Current, Frequency etc.) - Visual and Audible Alarms - AC Failure, Over Temperature and Short Circuit Protection

HT-TX; The series has fully digital control and uses two high-speed DSPs, ensuring high input power factor and low input current distortion. Its high performance combined with the internal three-phase isolation transformer brings it to the highest quality and protection standards. The architecture, which includes over-temperature and other protection measures with the 8 different sensors it uses, ensures a long service life with safety methods such as Overload, Low Battery Voltage, Fan Errors, Short Circuit protections. Four built-in circuit breakers provide complete control with high quality switches. In order to ensure battery safety and highest performance, it uses all of the latest known technologies: Smart charging method, Automatic adjustable performance test and Thermal charging capabilities. It provides the user with easy access to data and operation thanks to its very simple and understandable designed multi-language LCD interface.

Switch mode coating rectifiers are produced in Turkey under the ALPHAWORLD brand. Domestic production switch mode coating rectifiers are under warranty for 2 years against manufacturing and workmanship defects. All products produced by ALPHAWORLD have a 15-year spare parts warranty. Technical service is provided 24 hours a day, 7 days a week in 81 provinces. Technical information of our product is in the detail section below. What Do Switch Mode Coating Rectifier Prices Promise? Switch mode shutdown rectifier is an electronic power element produced with IGBT technology. Thanks to switch mode technology, rectifiers save energy. Compared to traditional rectifier models, switch mode provides higher efficiency in a smaller area. In this way, it is possible to achieve energy savings between 10% and 30%. IGBT technology allows high frequency rectifier switching control.

Pvc Roller doors are high speed, high performance doors in intense work areas and on demanding conditions.It helps to save time and energy by managing human and vehicle traffic between the rooms and rooms in your facilities.It minimizes image and noise pollution in applications like frequent opening and closing like storage.It minimizes your hygiene problems.We have options that can work with radar, metal mass detector, remote control, ip, switch and carded or coded delay systems.

Connection Type: U bolt or Threaded / Working Pressure: 400 - 450 PSI / Working Temp.: 0ºC , +49ºC. ** In wet pipe systems, generally pedal type water alarm switches are used for informing users 4-10 gpm water flow has started. Water flow switches are used in Aqueous and foam fire extinguishing systems. They are used in only wet pipe systems. Because of the dry contact feature it appears on the control panel. Flow switches are suitable for the using in indoor and outdoor. *** Application area: All wet pipe lines

Introducing the cutting-edge K12200 180 Degree Mold Upender from KEDY, the ultimate solution for your manufacturing needs. This machine is equipped with advanced features such as PLC technology for smooth and precise speed control, and limit switches and a light barrier for added safety and accuracy. The patent-pending design allows for the efficient upending of molds or workpieces all at once, increasing productivity and reducing downtime. Fully electric, plug-and-play, and easily automated, this technology is designed to integrate seamlessly into your existing production line, taking your manufacturing process to new heights. With its safety features, it guarantees safe operation and reliability in your manufacturing process. Contact us now!

Automatic Genset Controller with Transfer Switching CanBus J1939 ECU communication

-Hydraulic Mini power packs -Hydraulic pumps, -Hydraulic Motors, Orbit Motors -Hydraulic power units and various hydraulic systems -Solenoid, Pilot, Manuel operated hydraulic directional control valves -Hand Valves -Relief, pressure, reducing, speed control valves, check valves, throttle valves -Modular and plate designed valves -Control blocks and hydraulic switch -Hydraulic Cylinders -Oil Coolers #hydraulicsystems #hydrauliccylinders #minipowerpacks #GearPumps #HydraulicMotors #HandValves