Chemical additives - Import export

Surfeco® PS 12 is a silicone-based spreading & penetration agent that greatly reduces surface tension. It shows a great hydrolytic stability over a wide pH range (2-12). The surface tension of 0.1% Surfeco® PS 12 aqueous solution was obtained as 27 dyn / cm. It has been determined that keep stable this performance in the pH range of 2-12. Increases the uptake of active ingredients Increases the leaf coverage/ stomata flooding Promotes spray volume reduction Enhances the efficacy of fertilizers or pesticide in the field Applicable to many products thanks to wide range pH stability (2-12) It is recommended to use up to %2-5% as an IN-CAN adjuvant to pesticide or fertilizer formulations. It is recommended to decide after laboratory tests for optimum dosage and compatibility.When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely.

Texhydro® FLASH is a next generation textile enhancer which helps providing softness and slickness to fabrics and garments. Especially recommend, for its high affinity, for synthetic and blend fabrics.It provides no yellowing effect, extreme shear stability, pH- temperature stability and electrolyte stability. Texhydro® FLASH is water dispersible and it is effective when used three to four times lower compared to amino silicone fluids. Proovides natural softness to sentetics and the blends Does not change the fastness value at 160 degrees High durability and resistance No yellowing Extreme stability under finishing conditions Applicable in padding and exhaustion process Self-dispersible Can be blended directly into the textile finishing bath Easy to handle Texhydro® FLASH can be considered to be utilized in textile finishing in all synthetics, synthetic/cotton blends, wool and polyester fleece. It can also be used on cotton fabrics.

Texamin® RUSTIC is a textile softener low-viscosity macro emulsion of a high molecular weight silicone fluid. Texamin® RUSTIC can be used for all natural and synthetic fiber mixtures, and is effective on a variety of woven or knit fabrics whether prepared by ring or opened spun yarns. Texamin® RUSTIC imparts a super soft and smooth hand, giving a slippery effect. Soft, silky handle High surface smoothness Improves the crease recovery Compatible with resin finishing agents Improves the sewability Color intensifying properties Compatible with resins Improves wash and wear properties Pre-dilute with cold water on a ration between 1:2 to 1:4. You can adjust the pH with acetic acid before adding the diluted Texamin® RUSTIC to the application. Complete foulard will then take place and the solution will be clear. Dry at 120 to 180°C (248 to 356°F) for 30 to 60.

Maxant® PRO is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Permanent foam cut off Stable effects during storage period Rapid foam knock-down Foam inhibition in extreme temperatures (up to 95 °C) Long term foam inhibition Compatibility with wetting agents Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Maxant® PRO is mainly designed for preventing foam in process applications. For process applications, we recommend prediluting Maxant® PRO silicone antifoam with cold water in a ratio of 1:1 to 1:10.

SURFECO® PLUS is a super-spreading surfactant based on a trisiloxane ethoxylate, a silicone polyether copolymer with 550 molecular weight. SURFECO® PLUS has super-spreading properties in aqueous solutions while remaining stable in formulations from pH 5 - 8. SURFECO® PLUS can reduce surface tension in aqueous solutions at use levels up to 1.0 % by weight. Typical recommended starting level is 0.1 %. Stable effects during storage period Super-spreading and wetting Lowers surface tension more, compared to conventional surfactants Provides an aqueous surface tension of 21.5 nM/m2 Effective and remaining stable in formulations from pH 5 - 8 Low viscosity Very effective at low concentrations SURFECO® PLUS should be added directly into tank and agitated to ensure proper mixing. For optimum performance, solutions containing SURFECO® PLUS should be applied within 72 hours after mixing.

Cossil® TMS 50 ID is a mixture of MQ resin and isododecane. It can be added directly in oil phase of the formulations. It offers good water repellency. Cossil® TMS 50 ID is suitable for many personal care products such as antiperspirants, deodorants, skin care, color cosmetic, sun care products. INCI Name: Isododecane (and) Trimethylsiloxysilicate Cossil® TMS 50 ID can be used in many products. Sun Care Products (sun care creams and lotions) Make-up Pruducts (foundations concealers etc.) Color Cosmetics Products (lipsticks, mascaras, eyeliners, eyeshadows etc.) Hair Care Products (hair sprays, hair styling products etc.) Fast drying due to the volatility of isododecane Good water repellency Excellent film former Provides long-lasting effect Does not give tackiness Gives smooth feel Reduces whitening effect in lotions

Nova HC 17041 is a low-viscosity macro emulsion of a high molecular weight silicone fluid. especially for fabric softeners. Nova HC 17041 improves the properties when combined with conventional laundry products. Improves the properties of the fabric softeners. Easy to mix Improves the softening efficacy Increases hydrophilicity of fabrics Significantly improves the ironing properties. Nova HC 17041 is suitable for combining with the following products to improve performance. 2 in 1 Liquid detergent Fabric softeners Laundry conditioners Easy ironing spray

Maxant® WORK is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Maxant® WORK is stable under extreme condition with low concentrations. Maxant® WORK is suitable for fully-synthetic working fluids and emulsion type working fluids Permanent foam cut off Rapid foam knock-down Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Excellent foam control Keep the initial performance Shear Stability Maxant® WORK is mainly designed for preventing foam in process applications. Maxant® WORK can be added directly into the foam solution. 1-20ppm is suitable for application.

PLUS SAFETY MEDICAL Protective Coverall is a high performance chemical protective suit, certified to PPE Directive Category III, Type 3/4/5/6 levels of protection, making it suitable to protect against a range of chemical jets and sprays. with additional design features including enlarged zip pulls and thumb loops, an integrated double-closing storm flap system with and chin flap, convenience of use can be offered without compromising the high level of protection offered. Product Type:Type 3/4/5/6 Chemical Suit Disposable Coverall Material:High performance external barrier film coated to non-woven fabric Zipper:Nylon on polyester braid Elastic:Neoprene rubber (latex free) Tape:Multi-layer composite barrier tape processing workshop dustproof -cleanroom / laboratory isolation dry painting , spray printing - grinding and fiberglass - industry maintenance - powder handling - etc..

Maxant® PRO is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Permanent foam cut off Stable effects during storage period Rapid foam knock-down Foam inhibition in extreme temperatures (up to 95 °C) Long term foam inhibition Compatibility with wetting agents Long durability in acidic and alkaline conditions Outstanding durability at low add on levels www.latro.com.tr Product Description: Maxant® PRO is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Applications Maxant® PRO is mainly designed for preventing foam in process applications. For process applications, we recommend prediluting Maxant® PRO silicone antifoam with cold water in a ratio of 1:1 to 1:10.

BS Shockpad is a specialized polyethylene foam material, chemically cross-linked for enhanced performance. Through a combination of heat expansion and the addition of chemical inflators and cross-linking agents during extrusion, this foam material achieves advanced chemical and mechanical properties. Compared to physically cross-linked polyethylene foam, the cell structure of BS Shockpad is larger, resulting in a slightly less smooth surface. It is widely used in applications that require sound, heat, humidity insulation, and shock protection.

The Soap Factory, founded by Arnas Family, which has been engaged in agricultural production in Turkey for 350 years, has strong brands and a wide range of products in the category of natural cosmetics and personal care products. Each step of our production phase is customized to preserve the naturalness of our ingredients. Our highly concentrated soaps processed in traditional copper cauldrons are prepared by hand workmanship. These soaps are combined with natural glycerin. Our soaps are without any chemical additives. Silk Collection Soaps produced by the cold process method consist of more than 50 varieties. Basically, olive oil, coconut oil, and castor oil are used. Vitamins and glycerin are not lost in soap content in cold production. Thus, it provides excellent care on the skin. Available: Argan, Nigella, Lavender, Olive Oil, Goat Milk, Donkey Milk, Rice Bran, Tea Tree, and Honey Oat Soap Packaging: 100 g Shelf-life: 24 Months

Designed for washing the dyed textile samples with the same process as in the bulk production machines. Available with 3 chemical addition pumps and reserves. Automatic filling and draining and temperature gradient control helps the operator to create the cycle as per demand. The sample holder movement speed is adjustable and effects positively to optimize the wash effect. According to the design of the machine bleaching, desizing and Atmospheric dyeings can be made as well.

HERBAL TEA WITH VALUABLE NUTRIENTS Herbal teas that have become very popular recentlyInstead of ordinary traditional teas, they are beverages that contain different searches in their content and are produced from herbal products with high nutritional values. Herbal teas, which are preferred to consume a hot delicious product that has different Vitamin and mineral fiber values ​​in its content, are available in different varieties in the market. Mindivan, which produces in the sector for this purpose, develops different herbal tea contents as a result of long detailed and meticulous researches with the latest technology devices in its own production facilities with its professional and experienced team. mindivan, which produces the most natural, pure and organic herbal tea, continues to serve through its online sales site with dozens of different products. No additives, chemical preservatives or sweeteners are used in the content of the products produced with high quality principles.

Fully elastic waterproofing material with two components resitant to light pedestian traffic and which contains waterproofing chemical additives.

cement-based ,improved,, semi elastic waterproofing material with two components resistant to ligh pedestrian traffic. It contains waterproofing chemical additives.

It provides a deep cleaning and native application. Helps to get rid of death skin by peeling. It is sort of SPA product. It includes neither any chemical substance nor additives as an Natural Product.

Properties of Bst Natural Oils cold pressed black seed oils Best quality black seeds are chosen from the reliable sources. Bst black seed oil are completely virgin oils that are produced from first cold pressing of black seeds. No preheating process: Black seeds are not heated before they are taken into process although this leads to higher yields and reduces the cost. Bst Natural Oils black seed oils are never exposed to heat above 40 degrees Celsius during production. % 100 Natural Food grade No chemicals No additives Not refined Not deodorized Bst Natural Oils’ cold pressed black seed oil preserves its own characteristics of the seed. HS codes of black seed oil: If unit package is less than 1 Kg: 1515.90.5100 If unit package is more than 1 Kg: 1515.90.5900 Product Description: Black Cumin Seed (Kalonji) Oil Chemical composition: Nigella sativa Seed oil produced by cold press expelling method from the seeds of black cumin seeds. Bulk shipment is available.

ASPHALT CRACK FILLING CHEMICAL RANU-C ASPHALT CRACK FILLING CHEMICAL Yüksel Polymer (SBS) additive is a long-lasting, high-adhesion, bitumen-based hot application chemical material with high mechanical strength.

We are specialized in ferro alloys, master alloys, non-ferrous metals, noble alloys, pig irons, recarburizers, refractories, shell sand, chemicals for foundries and other additives including more than 300 products.