Hole punch - Import export

Micron hand tools are made of high quality stainless steel material. Remember to use a plastic mallet, not a steel hammer.

Polished barrel with hardened cutting edge. Hole tapers inside for easy punching clearings. Available in 2 sizes. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

It has been designed and constructed with respect to the pre punch holes to prepare a connecting element assembly, especially for metal plates. These packages are produced in order to order and delivery for approximately 3 4 weeks.

Fully automatic, self loading machine. Fed by hoppers. Punches a hole and sets the grommet in one step. Can only accommodate one size die for the lifetime of the machine. Foot pedal for hand safety. Requires 220 volts of AC power to operate. This machine is built around a newly designed frame that requires less space and is much lighter than previous generations. The M 500 fully automatic machine that feeds both the grommet and washer punches the hole in the material and attaches the grommet and washer, all in a single cycle. This machine has been specifically engineered for light to medium duty applications. Features Flywheel powered and cam actuated to ensure consistent settings. Advanced cutting technology to punch a hole in multi layeredmaterialsCompensator to allow for a nominal variance in material thickness.Stripper plate to lift grommet and washer setting off the pilot ofthe anvil.

Micron’s high quality hole piercing dies are only compatible with the M 3, DEP 2, PL 10 and MC 20 fastener attaching machines. Perfect for pre punching holes into various materials. Please be sure to choose the corresponding setting dies (same number) when ordering. Top shaft is ¼” threaded.

This #15 cutting die measures 2″(48mm) and is intended to be used prior to installing our #15 – 2 inch curtain grommets to perfectly punch holes. Specifically used with spandex/lycra fabrics. Top shaft is 5/8” smooth. These dies sets are designed to be used with Micron M 3 fastener attaching machine and the MC 20 double cylinder fastener attaching machine. Each cutting dies comes with a white Teflon cutting board to protect the blade from dulling.

Micron’s high quality hole piercing dies are only compatible with the M 3, DEP 2, PL 10 and MC 20 fastener attaching machines. Perfect for pre punching holes into various materials. Please be sure to choose the corresponding setting dies (same number) when ordering. Top shaft is ¼” threaded.

This #15 cutting dies measures 2″ (44 mm) and is intended to be used prior to installing our #15 – 2 inch curtain grommets to punch holes. Specifically used with spandex/lycra fabrics. Top shaft is 5/8” smooth. These dies sets are designed to be used with Micron M 3 fastener attaching machine and the MC 20 double cylinder fastener attaching machine. Each cutting dies comes with a white Teflon cutting board to protect the blade from dulling.

Micron M-500 fully automatic, eyelet and washer attaching machine. This machine is built around a newly designed frame that requires less space and is much lighter than previous generations of machines. The M-500 fully automatic machine that feeds both the eyelet and washer punches the hole in the material and attaches the eyelet and washer, all in a single cycle. This machine has been specifically engineered for light to medium duty applications.

U.S. Continental Area Flat Rate Shipping fee $199.99 Primarily used to set large curtain grommets and our oblong grommets. Features interchangeable dies. Punches the hole and sets the grommet in one step. Foot pedal for hand safety. Requires 220 volts of AC power to operat. Micron MH 5 DTS14 hydraulic deep frame(casting) fastener attaching machine is one of most sought after machine. This machines features a hydraulic pump which gives it the capability to install grommets in one single action. This machines features a hydraulic pump which gives it the capability to install grommets in one single action. We took the suggestions from our clients regarding our MH 1 and incorporated them into its newerst iteration, the MH 5 . A stronger motor to power throught multiple layers, interchangeable dies for increased flexibility and an improved safety feature.

All dies, sold separately. Primarily used to set large curtain grommets and our oblong grommets. Features interchangeable dies. Punches the hole and sets the grommet in one step. Foot pedal for hand safety. Requires 220 volts of AC power to operate. Micron MH 5 large fastaner attaching machine is one of most sought after machine. This machines features a hydraulic pump which gives it the capability to install grommets in one single action. MH 5 attaching machine is one of most sought after machine. This machines features a hydraulic pump which gives it the capability to install grommets in one single action. We took the suggestions from our clients regarding our MH 1 and incorporated them into its newerst iteration, the MH 5 . A stronger motor to power throught multiple layers, interchangeable dies for increased flexibility and an improved safety feature.

Sheet Metal Grommets quickly and efficiently with Micron’s industrial die sets. These dies are built to cut and set your sheet metal grommets in a 2 step cutting and setting process without having to change your dies to ease the production time. The die first punches the hole in the material on the first step, then sets the grommet on the second step. This eliminates the need to swap dies or run concurrent machines. √ 3/8 inch smooth top shaft, 3/4 inch smooth bottom shaft. √ Compatible with the MC 20 fastener attaching machine, intended only for sheet metal grommets. √ These dies are compatible with Stimpson and Scovill grommets.

Set Rolled Rim Grommets quickly and efficiently with Micron’s industrial die sets. These dies are built to cut and set your rolled rim grommets in a 2 step cutting and setting process without having to change your dies to ease the production time. The die first punches the hole in the material on the first step, then sets the grommet on the second step. This eliminates the need to swap dies or run concurrent machines. √ 3/8 inch smooth top shaft, 3/4 inch smooth bottom shaft. √ Compatible with the MC 20 fastener attaching machine, intended only for rolled rim grommets. √ These dies are compatible with Stimpson and Scovill grommets.

Sheet Metal Grommets quickly and efficiently with Micron’s industrial die sets. These dies are built to cut and set your sheet metal grommets in a 2 step cutting and setting process without having to change your dies to ease the production time. The dies first punches the hole in the material on the first step, then sets the grommet on the second step. This eliminates the need to swap dies or run concurrent machines. √ 3/8 inch smooth top shaft, 3/4 inch smooth bottom shaft. √ Compatible with the MC 20 fastener attaching machine, intended only for sheet metal grommets. √ These dies are compatible with Stimpson and Scovill grommets.

Set Self Piercing Grommets quickly and efficiently with Micron’s industrial die sets. These dies are built to cut and set your self piercing grommets in a 2 step cutting and setting process without having to change your dies to ease the production time. The die first punches the hole in the material on the first step, then sets the grommet on the second step. This eliminates the need to swap dies or run concurrent machines. √ 3/8 inch smooth top shaft, 3/4 inch smooth bottom shaft. √ Compatible with the MC 20 fastener attaching machine, intended only for self piercing grommets. √ These dies are compatible with Stimpson and Scovill grommets.

Brass grommet and teeth washer provide rugged and unyielding setting for a wide variety of applications. Manual, semi automatic and fully automatic grommet setting machines easily set grommets and plain washers ensuring installation runs smoothly and efficiently. This multipurpose grommet and washer combination can be used in a variety of materials including industrial fabrics, canvas, leather and heavy duty vinyl tarps, as long as a hole has been pre punched in the material. Please take a look to the chart in order to find the dimensions you need for every size and finishes of sheet metal grommet and teeth washer manufactured by Micron America.

Brass grommet and plain washer provide basic hole reinforcement and versatility for a wide variety of applications. Manual and semi automatic grommet setting machines easily set grommets and plain washers ensuring installation runs smoothly and efficiently. This multipurpose grommet and washer combination can be used in a variety of materials including industrial fabrics, canvas, leather and heavy duty vinyl tarps, as long as a hole has been pre punched in the material. Please take a look to the chart in order to find the dimensions you need for every size and finishes of sheet metal grommet and plain washer manufactured by Micron America.

Rolled Rim Grommets with Spur Washers are available in brass with a selection of finishes including nickel plated and brass and military black.Specifically engineered to interlock, the teeth of the washer grab the material ensuring a rugged and rigid setting. This multipurpose grommet and washer combination can be used in a variety of materials including industrial fabrics, marine canvas, boat covers, awnings, and heavy duty vinyl tarps as long as a hole has been pre punched in the material. Please take a look to the chart in order to find the dimensions you need for every size and finishes of rolled rim grommet and spur washer manufactured by Micron America.

Rolled Rim Grommets with Spur Washers are available in brass with a selection of finishes including nickel plated and brass and military black.Specifically engineered to interlock, the teeth of the washer grab the material ensuring a rugged and rigid setting. This multipurpose grommet and washer combination can be used in a variety of materials including industrial fabrics, marine canvas, boat covers, awnings, and heavy duty vinyl tarps as long as a hole has been pre punched in the material. Please take a look to the chart in order to find the dimensions you need for every size and finishes of rolled rim grommet and spur washer manufactured by Micron America.

Mercury steels are a set of steels that are hardened with water suitable for the construction of tools such as twist and dental drills, Guides, Drift punches, Countersinks , Center drills, Rasps, Hole punches, Metal saws, Drawing punches and all sorts of staples, connecting tab and similar tools.

Mercury steels are a set of steels that are hardened with water suitable for the construction of tools such as twist and dental drills, Guides, Drift punches, Countersinks , Center drills, Rasps, Hole punches, Metal saws, Drawing punches and all sorts of staples, connecting tab and similar tools.

Thermoforming lids are as necessary as cups in disposable plastic items industry. Almost all food-connected packaging plastic items, such as YOGURT CUPS, SALAD CONTAINERS, TAKE-AWAY CONTAINERS AND LUNCH BOXES, TRAYS, JUICE CUPS, COFFEE CUPS, need their thermoformed lids from PP, PS or PET. CMK lid moulds, same as the cup moulds, are manufactured by using high quality aluminium and steel from Europe and all material is processed by European CNC tooling devices. CMK manufactures Lid Moulds with or without hole punch and moulds to be used on PP,PS,PET materials.

CMK 85/55-S4 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or multi compartment containers, hinged lid containers, leaking-proof containers, hole-punch containers, egg viyole, flower pots and seeding trays. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors Automatic lubrication of moveable parts which is activated as perthe specified time space

The G series packing machines work from reel to final bag. These machines are designed for forming, filling and sealing of doypack style pouches, 3 or 4 side sealed sachets, shaped pouches and pouches with spout. SPECIFICATIONS Full Servo Motion Control System 10’’ Hmi Lcd Touch Control Operating System Film Centering System Servo Controlled Scissors Servo Controlled Pouch Opening System With Vacuum Photocell Control System Heavy Duty Construction Servo Controlled Pouch Streching System No Open Bag No Fill System Zipper Aplication (Optional) Zipper Perforation And Opening System (Optional) Tear Notch System(Optional) Shaped Bag Molding System (Optional) Top Spout And Corner Spout Application System (Optional) Round Corner Application System (Optional) Euro Or Punch Hole Application System (Optional) Gas Flushing System (Optional) Inverter Controlled Roll Unwind System Printer Connection System (Optional) Stainless Steel M