High pressure - Import export

0.2mm 45° & 100° Fogging Angle 70bar (1015psi) 75gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

It is the system that allows the crushed goods to be transported by suction. It has the highest efficiency, minimum energy consumption and it is versatile and silent. The fan, mounted on the chassis with a steel cage, works on rubber feet (wedges) in order to prevent vibration and vibration. Since its static and dynamic balance is taken, the noise level is minimized, the inlet and outlet pipes are supported with rubber flanges to prevent vibration transfer. Applications Fields ◾ Food Industry ◾ Flour and Semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Oil factories ◾ Wheat, barley, rye oats operating facilities

These flanges sleeve bearings have lubrication fully applied and are appropriate for general-purpose applications like conveyors, machines, and appliances. Ø30mm and above sleeves bearing with flange are manufactured according to your technical drawing dimensions.

The particulate filter cleaning machine is designed to clean the particulate filters of both passenger cars and commercial vehicles. The machine is completely made of stainless steel. With the water purification system, water in the tank is recirculated and cleans the inside of the particle filter.The machine starts the washing process by measuring the clogging rate of the filter after test button on the touch-operated display is selected. After the washing process is completed, you can test again and measure that the filter is cleaned. Then you can finish the washing process and proceed to the drying process. After drying the inside of the filter, the cleaning process is fully completed. There are bag and cartridge filters on the machine. Tank has heat insulation. The machine has lighting and a steam discharge fan. You can wash and dry 2 different filters simultaneously, as the machine has individual washing and drying processes.The machine exist in manuel and pneumatic.

Torque Converter & Welding Testing Machine

Piping includes a pipe or system of pipes, pipe spools, tubing, fittings, expansion joints, hoses, or other pressure bearing components as appropriate. Pressure piping systems transport fluids under pressure. Components of pressure piping include: a. Pipes: The main conduits for fluid transport. b. Fittings: Connectors, elbows, and tees that join pipes together. c. Valves: Used to control and regulate the flow of fluids. d. Flanges: Connect pipes to other components like valves, pumps, or tanks. Novelty Steel is an experienced fabricator of pressure vessels for power, oil and gas, chemical, food and mining industries. With vast CNC Machinery Park and experienced engineering team, Novelty Steel produces bespoke CNC Machined parts according to the European Norms. Our fabrication portfolio covers: * Pressure Vessels * Boilers * HRSGs * Heat Exchangers * Pipe Spools * Piping Components * Pipe Supports * Process Skids

"This design achieves a hyper-efficient 100% contact between the air and refrigerant circuits, delivering state-of-the-art performance and great cooling efficiency. The state-of-the-art 3-in-1 design features very low differential pressure delivering significant energy savings. The 3-in-1 Heat-Exchanger is compact and allows the dryer to be smaller and reduces the space required for the dryer. Mikropor offers a variety of 3-in-1 dryers equipped with the 3-in-1 Heat-Exchanger to meet a full range of capacity and power requirements."

"Mikropor manufactures a line of High Performance Compressed Air Filters, Moisture Separators in two different ranges; 50 bar range made of Aluminium. No welding, strong and reliable design. 350 bar range made of Steel. No welding and designed for reliability at very high pressure applications.Mikropor High Pressure Range Compressed Air Filters are NO-weld design. These Filters are built with ample wall thickness and as a result are extremely robust. In-house high pressure test facilities assure the performance. All inner and outer surfaces of 50 bar Aluminium design Filters are Anodised, where 350 bar Carbon Steel design Filters are epoxy electro powder coated."

It is used for the transportation of semi products from the roller mills to the plansifters. Produced specifically for each pneumatic line; our pneumatic fans are designed according to the calculated necessary air pressure and air flow. Thanks to rubber vibration dampeners underneath the machine and rubber flanges at the sucktion and disharge pipes, the vibration is prevented from reaching the pneumatic line and the building.

With professional and modern technology, High Pressure Desiccant Air Dryers with a capacity of up to 300 bar can be produced according to the needs of your production facility. Compressed air may contain various undesirable contaminants such as water vapor, oil, particles and dust. If polluted air comes into contact with equipment in the production process, it causes equipment damage. Features of High Pressure 50Bar Desiccant Air Dryers Standard Accessories: It has electronic control feature. Long-life pneumatic valves of European origin Superior performance active alumina American and Japanese made exhaust air silencers Inlet and outlet air filters Zero air loss water discharge system at the entrance Optional accessories: Dewpoint sensor and Energy saving mode Maximum Working Pressure: 50Bar-300Bar varies depending on the models. Regeneration air loss rates: -40 Dewpoint: 2.7% -70 Dewpoint: 5.4% Our High Pressure Desiccant air dryer models have a 2% air loss rate.

High pressure casting is a process in which molten metal is safely filled into the mold cavity under pressure. High dimensional accuracy greatly reduces machining work. High pressure die castings have a good surface finish, which is a basic requirement for coating. Molds have a long service life, reduce unit part costs, and more complex parts can be produced, thereby reducing the number of components required in an assembly.

Diaphragm Pressure Reducing Valve DN15-DN25 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded (FF) / Type : With union, with gauge (manomater) / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems

These tanks, which have wide application areas in different industries, can increase efficiency and ensure operational safety with the right choices. When purchasing a pressure tank, you should carefully consider your process requirements, paying attention to material quality, design features and safety standards. As GEO Tekno, with over 25 years of experience, we can help you select the pressure tanks you need and provide you with the most suitable solutions through our experienced design and manufacturing departments. If you need a pressure tank for your process, all you have to do is to contact us. Do not hesitate to contact us for your questions. Choose our certified pressure tanks to maximize your process performance!

0.4mm 45° & 100° Fogging Angle 70bar (1015psi) 150gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.2mm 45° & 100° Fogging Angle 70bar (1015psi) 75gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.7mm 45° & 100° Fogging Angle 70bar (1015psi) 240gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.7mm 45° & 100° Fogging Angle 70bar (1015psi) 240gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.7mm 45° & 100° Fogging Angle 70bar (1015psi) 240gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.6mm 45° & 100° Fogging Angle 70bar (1015psi) 210gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.5mm 45° & 100° Fogging Angle 70bar (1015psi) 190gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.5mm 45° & 100° Fogging Angle 70bar (1015psi) 190gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.4mm 45° & 100° Fogging Angle 70bar (1015psi) 150gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.6mm 45° & 100° Fogging Angle 70bar (1015psi) 210gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.4mm 45° & 100° Fogging Angle 70bar (1015psi) 150gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)

0.3mm 45° & 100° Fogging Angle 70bar (1015psi) 105gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305)