Heating oil - Import export

It ensures that the daily required oil is heated to bring it to the appropriate fluidity level to be fed into the system.

A heat exchanger is a device designed for the transfer of internal thermal energy between two or more fluids with different temperatures. Typically, these fluids are separated by a heat transfer surface to prevent mixing. Heat exchangers find applications across various industries, including process, power, petroleum, transportation, air-conditioning, refrigeration, cryogenic, heat recovery, alternate fuels, and more. Examples of heat exchangers encountered in daily life include automobile radiators, condensers, evaporators, air preheaters, and oil coolers. Heat exchangers can be classified in numerous ways based on their design and applications.

It is special oil that is formulated to be used in heating systems operating with oil, and requiring heat transfer such as those in nutrition, plastic, building materials and dye industries. It prevents oxidation in hot conditions and thus avoids residue formation thanks to its high thermal stability. Its evaporation loss is low. It provides operation easiness by performing easy circulation under low temperatures. Safe usage temperature: Closed systems: max 320 °C, Open systems: max 200 °C Specifications regarding applications set forth by manufacturer should be followed.

Heat Transfer Oils are high-performance fluids specially designed for use in enclosed, indirect heating systems. They are meticulously crafted from exceptionally refined base stocks known for their resistance to thermal cracking and chemical oxidation. These oils boast efficient heat transfer capabilities and exhibit viscosities that allow for easy pumping, both during startup and while operating at temperature. Importantly, the flash point of these fluids remains stable throughout their service life, thanks to their resilience against thermal cracking at recommended operating temperatures. Heat Transfer Oils are exceptionally thermally stable, ensuring an extended service life without the formation of deposits or viscosity increase. They feature specific heat and thermal conductivity properties that enable rapid dissipation of heat.

EVA SERIES SHELL&TUBE EVAPORATORS RANGE FROM 20KW TO 1510 KW COOLING CAPACITY IN EVAPTON'S STANDARD CONDITIONS. THE REFRIGERANT SIDE CAN BE MANUFACTURED FROM 1 CIRCUIT TO 4 CIRCUITS. EVA SERIES EVAPORATORS CAN BE USED IN HCFC AND HFC REFRIGERANTS WITH MEDIUM TO HIGH SYSTEM PRESSURE (30-45 BAR). EVA SERIES EVAPORATORS CAN BE MANUFACTURED BOTH IN STANDARD CATALOGUE DIMENSIONS AND IN THE DIMENSIONS REQUESTED BY THE CUSTOMER. EACH EVAPORATOR MANUFACTURED IS CONTROLLED AND TRANSMITTED TO THE CUSTOMER BY MEANS OF UNILAB LICENCE PROGRAMME FOR CAPACITY AND PRESSURE DROPS.

EVAPTON WATER CONDENSERS ARE USED FOR CONDENSING THE REFRIGERANT GAS IN INDUSTRIAL AND COMFORT COOLING SYSTEMS AND ARE MANUFACTURED IN EVAPTON STANDARDS OR IN SPECIAL DESIGNS ACCORDING TO DEMAND. WHILE ECON-C SERIES CONDENSERS ARE PRODUCED FOR COOLING APPLICATIONS USING MAINS WATER OR WATER COOLING TOWER WATER, ECON-M MODEL CONDENSERS ARE PRODUCED FOR SEA WATER OR SALT WATER. IT CAN BE MANUFACTURED FROM 20 KW COOLING CAPACITY UP TO 1500KW COOLING CAPACITY.

The copper tubes manufactured by us are extensively used in AC & R (industry Air Conditioning and Refrigeration). Applications Of Copper Tube : • Water distribution systems • Chilled water mains • Drainage and vent systems • Heating systems(includingsolar) • Fuel-oil systems • Oxygen systems • Non-flammable medical-gas systems etc. Some of the reasons for using copper in mechanical tube systems are: • Versatility • Easy to join and install • Wide range of sizes • Problem-free performance • Long lasting and maintenance free • Corrosion resistance • High thermal conductivity • An abundant resource They are produced that Copper fluid is casting to the billet moulds and follows to the extrusion press, after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380.

Pancake coiled copper tube which is named for its coiled style, is widely used on the connecting for the separated air-condition. On the other hand it is used in water distribution systems, chilled water mains, drainage and vent systems, heating systems (includingsolar), fuel-oil systems, oxygen systems also in non-flammable medical-gas systems. They are produced that Copper fluid is casting to the billet moulds and follows to the extrusion press, after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380

Pancake coiled copper tube which is named for its coiled style, is widely used on the connecting for the separated air-condition. On the other hand it is used in water distribution systems, chilled water mains, drainage and vent systems, heating systems (includingsolar), fuel-oil systems, oxygen systems also in non-flammable medical-gas systems. They are produced that Copper fluid is casting to the billet moulds and follows to the extrusion press, after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380

LWCand Pancake coiled copper tube which is named for its coiled style, is widely used on the connecting for the separated air-condition. On the other hand it is used in water distribution systems, chilled water mains, drainage and vent systems, heating systems (includingsolar), fuel-oil systems, oxygen systems also in non-flammable medical-gas systems. They are produced by horizantal casting after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380

The copper tubes manufactured by us are extensively used in AC & R (industry Air Conditioning and Refrigeration). Applications Of Copper Tube : Water distribution systems Chilled water mains Drainage and vent systems Heating systems(includingsolar) Fuel-oil systems Oxygen systems Non-flammable medical-gas systems etc. Some of the reasons for using copper in mechanical tube systems are: Versatility Easy to join and install Wide range of sizes Problem-free performance Long lasting and maintenance free Corrosion resistance High thermal conductivity An abundant resource

The copper tubes manufactured by us are extensively used in AC & R (industry Air Conditioning and Refrigeration). Applications Of Copper Tube : • Water distribution systems • Chilled water mains • Drainage and vent systems • Heating systems(includingsolar) • Fuel-oil systems • Oxygen systems • Non-flammable medical-gas systems etc.

Rima brand flexible cast iron slices Use with natural gas and oil Large heating capacity options High efficiency with 3 way passes

Rima brand flexible cast iron slices Use with natural gas and oil Large heating capacity options D Series : From 30 kw to 79 kw RS Series : From 76 kw to 145 kw ON Series: From 163 to 355 kw OM Series : From 378 kw to 930 kw

Ballistic composites are the ultimate point of our experience and knowledge on thermoset presses and production systems. product, mould, process, press, automation, hot oil or electric heating or oil or water cooling… whichever model is suitable for you and your product, we can give you the whole system on a turnkey basis. We have a serious place in ballistic composite systems, which is a small and very special market in the world. Our references are proof of that.

PHOENIX SERIES 100,000 Kcal/h – 10.000.000 Kcal/h heat capacity” “• Operates at high temperature and low pressure. • The heat conduction oil used in the system does not cause calcification, calcification, sediment, corrosive effect, etc. in the boiler. It can be used for a long time as it does not cause negative effects. • There is no need to use any conditioning unit in heat conduction oil. • Under normal conditions, freezing does not occur in the installation. • The Hot Oil Boiler can also be used as a heating fluid in the production of Steam, Hot Water, Boiling Water. • Hot oil outlet temperature is controlled by PID controller. • Hot oil return temperature is controlled by digital thermostats. • Ekotek Heating Technologies recommends all the accessories and burner systems that are used in Package System Hot Oil Boilers (Thermal Oil Heaters) from brands with known safety, Gas fuel type

Waste heat recovery boiler, in steam, water or thermal oil, fire-tube or water tube, designed as per exhaust gas parameters, turnkey project flexible solutions.