Cutting of sheet metal - Import export

Weight: 0,90 kg Height : 12 cm Width : 99,1 cm Material: 2 mm

Weight: 28,71 kg Height : 198 cm Width : 99 cm Material: 3 mm

We provide plasma - laser cutting services with our modern machinery park.

Our customers are the basis for the type of cutting. Special cutting is provided according to the desired dimensions and the project is created.

Sheet metal fabrication is the process of bending, cutting, punching, assembling sheet metal to form into the desired form. Special tools, such as band saws and chops saws, can also be used in the sheet metal fabrication process. These ensure even cutting throughout the process. Parts are fabricated from a single piece of sheet metal so designs should have a uniform thickness. Although carbon steel is the most prominent material for metal fabrication, stainless steel would be necessary for high corrosive environments whereas aluminium is primarily considered when weight of the product is a major limitation.

Weight: 1,07 kg Height: 7,9 cm Width: 200 cm Material: 0,7 mm

Weight: 0,78 kg Height: 7 cm Width: 200 cm Material: 0,7 mm

Weight: 1,40 kg Height : 12 cm Width : 100 cm Material: 3 mm

Weight: 27,210 kg Height: 99 cm Width: 190 cm Material: 3 mm

Weight: 0,70 kg Height : 10 cm Width : 100 cm Material: 2 mm

Weight: 0,69 kg Height : 7,5 cm Width : 100 cm Material: 3 mm

Weight: 38,18 kg Height : 198 cm Width : 99 cm Material: 3 mm

Weight: 10,50 kg Height: 80 cm Width: 120 cm Material: 3 mm

Weight: 38,18 kg Height: 198 cm Width: 99 cm Material: 3 mm

Sheet Metal Grommets quickly and efficiently with Micron’s industrial die sets. These dies are built to cut and set your sheet metal grommets in a 2 step cutting and setting process without having to change your dies to ease the production time. The dies first punches the hole in the material on the first step, then sets the grommet on the second step. This eliminates the need to swap dies or run concurrent machines. √ 3/8 inch smooth top shaft, 3/4 inch smooth bottom shaft. √ Compatible with the MC 20 fastener attaching machine, intended only for sheet metal grommets. √ These dies are compatible with Stimpson and Scovill grommets.

Sheet Metal Grommets quickly and efficiently with Micron’s industrial die sets. These dies are built to cut and set your sheet metal grommets in a 2 step cutting and setting process without having to change your dies to ease the production time. The die first punches the hole in the material on the first step, then sets the grommet on the second step. This eliminates the need to swap dies or run concurrent machines. √ 3/8 inch smooth top shaft, 3/4 inch smooth bottom shaft. √ Compatible with the MC 20 fastener attaching machine, intended only for sheet metal grommets. √ These dies are compatible with Stimpson and Scovill grommets.

Sheet metal fabrication is the process of bending, cutting, punching, assembling sheet metal to form into the desired form. Special tools, such as band saws and chops saws, can also be used in the sheet metal fabrication process. These ensure even cutting throughout the process. Parts are fabricated from a single piece of sheet metal so designs should have a uniform thickness. Although carbon steel is the most prominent material for metal fabrication, stainless steel would be necessary for high corrosive environments whereas aluminium is primarily considered when weight of the product is a major limitation.

ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.

Any type of metal sheet laser cutting service is offered. Laser cutting service is offered for stainless steel plate, copper plate, ST series plate, aluminum plate. We laser cut your drawings into metal sheets in dwg or dxf format. We also offer technical drawing service. We offer laser cutting services by converting your sketches into technical drawings.

We offer suspended ceiling machine line which can produce the suspended ceiling with different thickness, width range production capacity and can work different raw materials. Also we design our tools for different suspended ceiling tile perforation patterns and panel types. As Lay-In, Clip-In and Lay-On suspended ceiling panels. And also we can produce our suspended ceiling tile production lines as to customer special request with until 2.000 mm width. Suspended Ceiling Machine Main Units – Press Feeding Unit – Perforation Press – Sheet Metal Cutting Unit – Conveyor Unit – Press Feeding Unit – Press for Notching and Bending So, machine units one by one as decoiler, straightener. servo feeder, press for perforation, cutting unit, conveyor, second straightener and feeder , press for bending and notching.

Our coil cut to length line machines have capacity to fulfil the need of cutting the sheet metals between 600 and 1600 millimetres of width, 6.000 and 30.000 kilograms of weight.

Our coil cut to length line machines have capacity to fulfil the need of cutting the sheet metals between 600 and 1600 millimetres of width, 6.000 and 30.000 kilograms of weight.

Our coil cut to length line machines have capacity to fulfil the need of cutting the sheet metals between 600 and 1600 mm of width, 6000 and 30000 kilograms of weight.

Our coil cut to length line machines have capacity to fulfil the need of cutting the sheet metals between 600 and 1600 millimetres of width, 6.000 and 30.000 kilograms of weight.

Our coil cut to length line machines have capacity to fulfil the need of cutting the sheet metals between 600 and 1600 millimetres of width, 6.000 and 30.000 kilograms of weight.

Our coil cut to length line machines have capacity to fulfill the need of cutting the sheet metals between 600 and 1600 mm of width and, 6000 and 30000 kilograms of weight.

Our coil cut to length line machines have capacity to fulfill the need of cutting the sheet metals between 600 and 1600 mm of width and, 6000 and 30000 kilograms of weight.

Our coil cut to length line machines have capacity to fulfill the need of cutting the sheet metals between 600 and 1600 mm of width and, 6000 and 30000 kilograms of weight.

Our coil cut to length line machines have capacity to fulfill the need of cutting the sheet metals between 600 and 1600 mm of width and, 6000 and 30000 kilograms of weight