Connecting systems - Import export

This machine is used in flour mills to separate the stuck core particles in the product coming from the roll. In this way, in flour production; Soft separation does not spoil the product. Both floor and ceiling hanging position shape, Right and left directions of spinner bars, Low power requirement, Coupling or pulley connection system Application Fields ◾ At flour mills ◾ At coarse and fine semolina passages ◾ After roller mills or before plansifter inlet

The cylindrical body structure is produced in a structure suitable for the product flow in one or both sides, depending on the project conditions, with supporting legs suitable for connecting to the floor deck or floor. The vibro feeding system connected to the conical structure has an adjustable flow flap and is driven by a vibromotor. In flour factories, it is used in the parts that require the adjustment of the ground grains at the appropriate flow and simple feeding, generally in the parts where the filter outlets need to feed a pneumatic line or a machine and where the dust wastes are brought into the system with pneumatics.

The standard height of our products is 720 mm. Depending on the table top size, a telescopic traverse connection is used that is applicable to 70 cm - 90 cm Traverse connection is a telescopic system and screw mounted. Electrostatic powder coating is applied in our products. Customized production, disassembled shipment.

The standard height of our products is 720 mm. Depending on the table top size, a telescopic traverse connection is used that is applicable to 70 cm - 90 cm. Traverse connection is a telescopic system and screw mounted. Electrostatic powder coating is applied in our products. Customized production, disassembled shipment.

The standard height of our products is 720 mm. Depending on the table top size, a telescopic traverse connection is used that is applicable to 70 cm - 120 cm. Traverse connection is a telescopic system and screw mounted. Electrostatic powder coating is applied in our products. Customized production, disassembled shipment.

The standard height of our products is 720 mm. Depending on the table top size, a telescopic traverse connection is used that is applicable to 50 cm - 120 cm. Traverse connection is a telescopic system and screw mounted. Electrostatic powder coating is applied in our products. Customized production, disassembled shipment.

The standard height of our products is 720 mm. Depending on the table top size, a telescopic traverse connection is used that is applicable to 70 cm - 120 cm. Traverse connection is a telescopic system and screw mounted. Electrostatic powder coating is applied in our products. Customized production, disassembled shipment.

The standard height of our products is 720 mm. Depending on the table top size, a telescopic traverse connection is used that is applicable to 70 cm - 120 cm. Traverse connection is a telescopic system and screw mounted. Electrostatic powder coating is applied in our products. Customized production, disassembled shipment.

These are systems designed to achieve a transparent appearance on the facade, where the glass is connected to the carrier system (steel column-beam, glass or steel tension system) with special stainless glass holders. Glass can be applied as tempered laminated glass or tempered double glass. The joint gaps between the glasses can be insulated with UV resistant silicones.

Stalk Shredder: It is a device used to shred the plant residues (stubble) remaining in the field after harvest. It breaks the stems and plant residues left after the crops are harvested into small pieces. It ensures that plant residues crumble and mix easily with the soil. If desired, it can also be used as a green grass mower. Thanks to the straw shredder, plant residues mix with the soil and the amount of organic matter in the soil increases. In this way, organic life in the soil is supported and a more fertile soil rich in organic matter is obtained for the next planting season. It easily breaks down wet plant residues and stems. It can also be used to cut live plant stems and branches. International 3-arm CAT II connection system 1 3/4 inch diameter 6-spline PTO (tractor side size) Protected PTO shaft 750RPM PTO; Gearbox providing 1900 RPM rotor speed Rotor tube diameter 194 mm Y type blades Front guard chains 2 height adjustable wheels

Stalk Shredder: It is a device used to shred the plant residues (stubble) remaining in the field after harvest. It breaks the stems and plant residues left after the crops are harvested into small pieces. It ensures that plant residues crumble and mix easily with the soil. If desired, it can also be used as a green grass mower. Thanks to the straw shredder, plant residues mix with the soil and the amount of organic matter in the soil increases. In this way, organic life in the soil is supported and a more fertile soil rich in organic matter is obtained for the next planting season. It easily breaks down wet plant residues and stems. It can also be used to cut live plant stems and branches. International 3-arm CAT II connection system 1 3/4 inch diameter 6-spline PTO (tractor side size) Protected PTO shaft 750RPM PTO; Gearbox providing 1900 RPM rotor speed Rotor tube diameter 194 mm Y type blades Front guard chains 2 height adjustable wheels

*Lightweight Compact StructureEasy-to-Read OLED Display *Monitoring ECG, Respiration, SpO2, PR Parameters *3 or 5 Lead ECG Cable *Different Display Mode Options *64 units can be connected to the system at the same time *Nurse Call and Patient Call Functions *Connect to Central System with WiFi *Recording 240 Hours of Trends and 720 Hours of Alarm History for Each Patient

Ninja courses are based on a truss system. Obstacles integrated to truss system. Main objective is to finish the parkour at shortest time by overcoming the obstacles. Cubic foams are filled the surface of the system to avoid woundings beause of falling down from the system. Mostly these courses are integrated to the trampoline parks. If demanded, these parkours can be manufactured independently. For maintenance, foam pits need to be clean periodically and connection systems need to be checked every time.

The validator is mounted on a handrail in the passenger compartment of the bus; it is equipped with a 4.5inch color display, contactless card reader and wireless Internet connection. A system of passive cooling and electric heating was implemented for quick start in frosty weather. We made a deep redesign of the validator. The new solution was implemented on the Mediatek platform with a custom display, battery and all the necessary peripherals. In addition, an update of the operating system and payment application by air was implemented. We implemented a passive cooling and electric heating system for quick startup in frosty weather. We made a deep redesign of the validator. The new solution was implemented on the Mediatek platform with a custom display, battery and all necessary peripherals. We also implemented online updating for operating system and payment application.