Coppering - Import export

We offer a wide range of rods, which are used for electroplating, switchgear, ship building and power generating equipment, as they are high-conductivity. On the other hand, they are widely used as radiator in electrical product, as its high- thermal conduction. They are produced that copper upward casting and follows to the Continuous press, after rods are drawn, to be copper rods, 1000 mm to 6000 mm length, 10 mm to 90mm diameter and they are according with TSE 435, DIN EN 12163 and DIN EN 13601. General properties material with minimum copper content 99.95%

Pancake coiled copper tube which is named for its coiled style, is widely used on the connecting for the separated air-condition. On the other hand it is used in water distribution systems, chilled water mains, drainage and vent systems, heating systems (includingsolar), fuel-oil systems, oxygen systems also in non-flammable medical-gas systems. They are produced that Copper fluid is casting to the billet moulds and follows to the extrusion press, after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380

Busbars are typically used in high current, low voltage distribution and control equipment. Typical busbar applications include busway systems, low and medium voltage switchgear, transformers, earthing, electrification - lines panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems. Busbars can be made from copper or aluminum, but we couldn’ t argue the reality that copper bus bars are the better electrical conductors. Also installers can use smaller busbars if they are made by copper. On the other hand copper busbars have better resistance to corrosion than the aluminum busbars.We have large production facilities for extruded and drawn flats in various production range of sizes and shapes for electrical engineering, anodes, components etc.

Beside Our exsisting wide range, we also develop profiles as per customers requirments.They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380. They are used in following main applications: • Automobiles and railways • Wide range of uses in electrical industry, e.g. switchgears, earthing rods etc. • Transformers and circuit breaker terminals • Electrical holders and clamps • Defence industries etc.

We offer a wide range of rods, which are used for electroplating, switchgear, ship building and power generating equipment, as they are high-conductivity. On the other hand, they are widely used as radiator in electrical product, as its high- thermal conduction. They are produced that copper fluid is casting to the billet moulds and follows to the extrusion press, after that annealed rods are drawn, to be copper rods, 2000 mm to 6000 mm length, 10 mm to 175 mm diameter and they are according with TSE 435, DIN EN 12163 and DIN EN 13601. General properties material with minimum copper content 99.95%

Busbars are typically used in high current, low voltage distribution and control equipment. Typical busbar applications include busway systems, low and medium voltage switchgear, transformers, earthing, electrification - lines panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems. Busbars can be made from copper or aluminum, but we couldn’ t argue the reality that copper bus bars are the better electrical conductors. Also installers can use smaller busbars if they are made by copper. On the other hand copper busbars have better resistance to corrosion than the aluminum busbars.We have large production facilities for extruded and drawn flats in various production range of sizes and shapes for electrical engineering, anodes, components etc.

Beside Our exsisting wide range, we also develop profiles as per customers requirments.They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380. They are used in following main applications: Automobiles and railways Wide range of uses in electrical industry, e.g. switchgears, earthing rods etc. Transformers and circuit breaker terminals Electrical holders and clamps Defence industries etc.

Pancake coiled copper tube which is named for its coiled style, is widely used on the connecting for the separated air-condition. On the other hand it is used in water distribution systems, chilled water mains, drainage and vent systems, heating systems (includingsolar), fuel-oil systems, oxygen systems also in non-flammable medical-gas systems. They are produced that Copper fluid is casting to the billet moulds and follows to the extrusion press, after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380

Copper has always been the standard material for electrical wiring systems. Because it can flow electricity very easily as it is a good conductor. We offer a comprehensive range of copper wire to our clients in various specifications of diameter and length.These hi-quality wire have excellent electrical and thermal properties and supplied with spools, coils or straightened. They are Useful in motor winding wire, cables, transformer winding, telecommunications, explosives, fuse wires, railways and many applications. They are produced, hard or annealed by copper wire rods which are drawn down to thickness 1,40 mm - 8mm. They are according with TS 3, DIN EN 13601, DIN EN 13602. General properties material with minimum copper content 99.95%.

Beside Our exsisting wide range, we also develop profiles as per customers requirments.They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380. They are used in following main applications: Automobiles and railways Wide range of uses in electrical industry, e.g. switchgears, earthing rods etc. Transformers and circuit breaker terminals Electrical holders and clamps Defence industries etc.

Busbars are typically used in high current, low voltage distribution and control equipment. Typical busbar applications include busway systems, low and medium voltage switchgear, transformers, earthing, electrification - lines panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems. Busbars can be made from copper, but we couldn’ t argue the reality that copper bus bars are the better electrical conductors. Also installers can use smaller busbars if they are made by copper. On the other hand copper busbars have better resistance to corrosion than the aluminum busbars.We have large production facilities for extruded and drawn flats in various production range of sizes and shapes for electrical engineering, anodes, components etc. They are produced OF upward cansting than Contunious processing and drawing.

Copper has always been the standard material for electrical wiring systems. Because it can flow electricity very easily as it is a good conductor. We offer a comprehensive range of copper wire to our clients in various specifications of diameter and length.These hi-quality wire have excellent electrical and thermal properties and supplied with spools, coils or straightened. They are Useful in motor winding wire, cables, transformer winding, telecommunications, explosives, fuse wires, railways and many applications. They are produced, hard or annealed by copper wire rods which are drawn down to thickness 1,40 mm - 8mm. They are according with TS 3, DIN EN 13601, DIN EN 13602. General properties material with minimum copper content 99.95%.

The copper tubes manufactured by us are extensively used in AC & R (industry Air Conditioning and Refrigeration). Applications Of Copper Tube : • Water distribution systems • Chilled water mains • Drainage and vent systems • Heating systems(includingsolar) • Fuel-oil systems • Oxygen systems • Non-flammable medical-gas systems etc. Some of the reasons for using copper in mechanical tube systems are: • Versatility • Easy to join and install • Wide range of sizes • Problem-free performance • Long lasting and maintenance free • Corrosion resistance • High thermal conductivity • An abundant resource They are produced that Copper fluid is casting to the billet moulds and follows to the extrusion press, after annealed tubes are drawing, to be copper tubes. They are according with DIN EN 1057, DIN EN 13348, DIN EN 13600, ASTM B280, ASTM B68, ASTM B75, TS 380.

Copper Strips are manufactured from highly conductive and thin thickness. they offer great resistance to corrosion.They are widly used in automotive industry; radiators, cable industry, electronic and electrical inustries; decorative components and Building inustry: roofings.etc. Coper Strips are ideally used in applications where the salt content in the soil is very high, with a width of 10mm to 160mm, Thickness of 0,20mm to 6mm. Copper strips are produced, hot and cold rolling , by extruded busbars and they are accordıng with TS EN 1652, DIN EN 1652, DIN EN 13599

We offer wide range of copper sheets that are made with accuracy to suit the client’s specification. We manufacture these copper sheets soft, hard and semi hard optionally for use in electrical industry, Roofing and for other applications.They are produced that Copper fluid is casting to the moulds and follows to the rolling machines, to be Copper sheets. They are according with TS EN 1652, DIN EN 13599. General Properties Material with minimum copper content 99.95%.

We offer a wide range of rods, which are used for electroplating, switchgear, ship building and power generating equipment, as they are high-conductivity. On the other hand, they are widely used as radiator in electrical product, as its high- thermal conduction. They are produced that copper fluid is casting to the billet moulds and follows to the extrusion press, after that annealed rods are drawn, to be copper rods, 2000 mm to 6000 mm length, 10 mm to 175 mm diameter and they are according with TSE 435, DIN EN 12163 and DIN EN 13601. General properties material with minimum copper content 99.95%

The copper tubes manufactured by us are extensively used in AC & R (industry Air Conditioning and Refrigeration). Applications Of Copper Tube : • Water distribution systems • Chilled water mains • Drainage and vent systems • Heating systems(includingsolar) • Fuel-oil systems • Oxygen systems • Non-flammable medical-gas systems etc.

we are the only company in the world that has the production process of welding copper contact tips from raw copper

Copper has always been the standard material for electrical wiring systems. Because it can flow electricity very easily as it is a good conductor. We offer a comprehensive range of copper wire to our clients in various specifications of diameter and length.These hi-quality wire have excellent electrical and thermal properties and supplied with spools, coils or straightened. They are Useful in motor winding wire, cables, transformer winding, telecommunications, explosives, fuse wires, railways and many applications. They are produced, hard or annealed by copper wire rods which are drawn down to thickness 1,40 mm - 8mm. They are according with TS 3, DIN EN 13601, DIN EN 13602. General properties material with minimum copper content 99.99%.

The copper tubes manufactured by us are extensively used in AC & R (industry Air Conditioning and Refrigeration). Applications Of Copper Tube : Water distribution systems Chilled water mains Drainage and vent systems Heating systems(includingsolar) Fuel-oil systems Oxygen systems Non-flammable medical-gas systems etc. Some of the reasons for using copper in mechanical tube systems are: Versatility Easy to join and install Wide range of sizes Problem-free performance Long lasting and maintenance free Corrosion resistance High thermal conductivity An abundant resource

Copper Strips are manufactured from highly conductive and thin thickness. They are windly used in automotive industry; radiators, cable industry, electronic and electrical industries; decorative components and Building industry: roofings.etc. Coper Strips are ideally used in applications where the salt content in the soil is very high, with a width of 5mm to 160mm, Thickness of 0,10mm to 10mm. Copper strips are produced, hot and cold rolling , by extruded OF busbars and they are accordıng with TS EN 1652, DIN EN 1652, DIN EN 13599 also EN 13601

We offer wide range of copper sheets that are made with accuracy to suit the client’s specification. We manufacture these copper sheets soft, hard and semi hard optionally for use in electrical industry, Roofing and for other applications.They are produced that Copper fluid is casting to the moulds and follows to the rolling machines, to be Copper sheets. They are according with TS EN 1652, DIN EN 13599. General Properties Material with minimum copper content 99.95%. Width : 1000 mm Length : 2000 mm Thickness : 0.40 mm to 4 mm

Lead bricks are the most widely used for weight such as ballast, as well as for Coves and radioactive materials and nuclear shielding. They are produced that Lead fluid is casting to the moulds There are several reasons why prefer lead bricks: Easy to stack and unstack Easy to relocate Provide maximum protection.

We manufacture aluminium circles which is available in required lengths and thicknesses that find usage in various industries ( handcrafts,cookware ) and are highly reliable and durable. They are produced that aluminium fluid is casting to the moulds and follows to the rolling machines after that annealed aluminium sheets are circled to be aluminium circles.

Aluminium Bus Bars for power distribution give an economic advantage compared to copper bars due to the lower cost of aluminium and to a significant difference in the weight / volume.In fact aluminium bars weigh up to 70% less than copper bars, compared with a reduction in electrical capacity of only about 30%.The use of aluminium bars for carrying electrical current is therefore recommended in switchboards, distribution equipment and systems where there are no space problems, or where weight reduction is critical.Aluminium bars with different corners are available with many Thickness and many lengths.

There are many different types of sinkers and a variety of shapes and sizes in the world. Arslan metal is concentrate primarily on the most commonly used sinkers and manufacturing ideal sinkers for use heavier currents, whether you are trolling or fishing.Our Sinker styles are Bank,Plummet,Ring,Barrel,Round Shot,Swivel,Drop etc. to match your fishing needs.

Any sizes are manufactured upon request.

Arslan Metal offers Sheet Lead for many applications that include Radiation Shielding - laboratories, hospitals, dental offices and veterinary clinics, Construction – flat and pitched roofing, mosques roofing, clading, flashing and waterproofing, gutters, parapets, Corrosion Protection - acid Storage and handling - autoclaves movable lead screens sound barriers and sound proofing, tank lining vibration absorbers and all lead detail work. They are produced that Lead fluid is casting to the moulds and follows to the rolling machines,to be lead sheets.