Weldings - Import export

Characteristic Features : High welding capability, very high durability against sea water corrosion, high fatigue strength, high cold formability in soft temper form, extrusion of thin and complicated parts are difficult. Warnings : In case of non-appropriate welding, breaking may occur. Product Shapes: plate, bar, roll, wire, pipe, profile types.

Welded components are all manufactured according to ISO standards.

Welded construction parts are manufactured all according to ISO Standards of certifed Suppliers.

The joining process on metal or plexi surfaces is expressed as welding construction. Combining different materials by using pressure or heat or using more than one material or giving the impression of being a single piece creates the waist collections of parts and

316 quality is the best known stainless steel after 304, the biggest difference is containing molybdenum (Mo). Molybdenum (Mo) 316 is better resistant to corrosion in corrosive environments than 304, it is especially good against cracks and pits in the surface and interior structure. Its shaping and welding capability is high. It can be used for various purposes in sectors such as industry, architecture, transportation. It does not require post-welding annealing for thin sections. 316L is the low carbon version of 316. Therefore, it does not require post-welding annealing for thick sections of 316L. 316Ti contains a small amount of titanium (Ti), the ratio is around 0.5%. The greatest advantage of this quality in the other two qualities is that it has a longer strength at high temperatures.

WELDING FEATURES With a simple fusion, two parts can be combined. Large and heavy parts such as blocks and pipes can be welded using eutectic and tin-lead solder or melting alloys with low fusion points.

Gas Metal Arc Welding (GMAW), commonly known as MIG welding, is a welding process where an electric arc forms between a consumable electrode and the workpiece, generating the necessary heat for welding. The electrode, continuously fed as a solid wire, melts and forms the weld metal as it is consumed. The welding area is protected from atmospheric contamination by shielding gases or gas mixtures from the welding torch, ensuring high-quality welds by preventing defects caused by even minimal air exposure.

In recent years, TIG welding has faced increasing competition from continuously refined MIG/MAG processes and their derived methods. Despite the slower welding speeds and lower melting power of TIG, it remains unmatched in achieving the highest quality results for many applications. Recent advancements in power supply technology offer promising future opportunities for TIG welding.

Gas Metal Arc Welding (GMAW), commonly known as MIG welding, is a welding process where an electric arc forms between a consumable electrode and the workpiece, generating the necessary heat for welding. The electrode, continuously fed as a solid wire, melts and forms the weld metal as it is consumed. The welding area is protected from atmospheric contamination by shielding gases or gas mixtures from the welding torch, ensuring high-quality welds by preventing defects caused by even minimal air exposure.

In recent years, TIG welding has faced increasing competition from continuously refined MIG/MAG processes and their derived methods. Despite the slower welding speeds and lower melting power of TIG, it remains unmatched in achieving the highest quality results for many applications. Recent advancements in power supply technology offer promising future opportunities for TIG welding.

Gas Metal Arc Welding (GMAW), commonly known as MIG welding, is a welding process where an electric arc forms between a consumable electrode and the workpiece, generating the necessary heat for welding. The electrode, continuously fed as a solid wire, melts and forms the weld metal as it is consumed. The welding area is protected from atmospheric contamination by shielding gases or gas mixtures from the welding torch, ensuring high-quality welds by preventing defects caused by even minimal air exposure.

In recent years, TIG welding has faced increasing competition from continuously refined MIG/MAG processes and their derived methods. Despite the slower welding speeds and lower melting power of TIG, it remains unmatched in achieving the highest quality results for many applications. Recent advancements in power supply technology offer promising future opportunities for TIG welding.

We are manufacturing your custom metal products. We cut, bend and weld metal sheets, profiles pipes in all sizes. Also, we offer PPC coating application in our large capacity factory.

Rotators are resistant to severe working conditions and are designed to rotate work pieces weighing 5 to 150 tons. It enables the cylindrical parts weld sensitively by rotating clockwise or anticlockwise. In line with customer’s demanded diameter and tonnages, its production can be made auto regulative or conventionally. Features -Through polyurethane coated wheels rotation quakes and uploading hitting are absorbed during welding. -In the applications requiring high temperature and major load, featured steel wheels can be used as well. -Wheels possess self-adjusting feature for small or big diameters. This adjustment can be made with ball screw or by hand optionally. -For the manual usage, digital control or analog entries can be integrated to Column Bom systems. -Sensitive rotation with low gaped reducer -Synchronised working feature -Power transmission with flat gears

There are hydraulic pressing clamps in the fixture equipment of system. The workpiece is both made spot welding by means of clamps and prevented distortion due to heat during welding. Separate control lever is used as to be put to rear of piston for each piston.Also there is a pressure relief valve on each control lever. Thanks to pressure relief valves the critical pressure is brought to the desired pressure and the compression of the material in desired strength may be achieved A lock valve is connected to each hydraulic cylinder after the tightening process and during the welding operation, the material is prevented from being retracted and opened due to heat input. Reverse deflexion may be done on the frame thanks to the control units in the clamp mechanisms. 1 inert gas arc welding machine will be used for spot welding process.( it will be supplied by the purchaser)

EKO circular welding systems are designed for circular pieces’ integration with various welding methods in different positions. It appeals to a wide usage area in which all of the welding techs single and multipass welding tig, mig/mag and submerged welds can be used. It is used in environmental and linear welding of materials like circular formed, boiler, thermosiphon, hydraulic cylinder, conveyor roller, conveyor wheel, solar power boilers etc. It increases output and gain with the savings of materials and time. Upon request, production is made on different diameter, height and features

Positioner is designed in order to change the piece’s position, tied onto it, to the best and weld. It gives movement opportunity on two independent lines which are rotating and angular positioning. Positioners can be fixed to the ground according to weight and center of gravity of the work piece. Flange rotating speed can be sensitively adjusted with the control. Optionally it can be adapted with Column-bom system as to work synchronized. Rotator and positioning motors are equipped with thermic protector separately.

Fit-Up systems shortens the big diametric and heavy pieces’ montage period in cylindrical piece fabrication and reduces the need of crane and operator. Fit-Up systems basically consist of 2 main rotator teams. With the fixed rotator system, pieces’ heights towards each other are adjusted while rotator amount increases according to piece tonnage. Other rotator systems are mobile and as it appends to the piece it moves forward and basically make the movement of the piece’s rotating movement. With the help of column-bom which is the source of montaged pieces on Fit-up systems, it can be finished quickly while saving man-hour. In Fit-up system basically; besides the fixed rotator set that adjusts montage and heights it contains 2 motorized and 1 wanderer rotator systems.

With column-bom systems, framework can be welded freely as well as it can be welded circular or lengthwise with the help of invertor or positioner. It provides an opportunity to weld various diametric and long distances. Submerged, Mig, Mag, Tig welding processes can be used in the system. Column Bom systems (CBS), can be fixed on the ground or automatically walking on track. Column Bom systems enable increasing the quality, reducing the time of production and operator exhaustion, to sensibility and increasing the amount of weld an operator can constantly weld. In the Bom motion, with linear sleds and telescopic bom sensitive inner welds of cylindrical framework can be made.

Industrial welded wires: Galvanized or black iron point welded grid wire system.

We produce electrofusion machines that can weld diameters from 20mm to 1600mm.

16 mm to 1200 mm butt fusion machines. high quality product.

Access to the workpiece from the outer surface Installation close to the wall edge Linear welding with walking motion Circular welding on the rotating system Motion transfer with linear slides and trolleys Ability to connect welding machine, oxygen and plasma cutting unit Ability to create special applications and stations