Results for
UGUR MAKINA CRUSHING & SCREENING
Turkey
They are produced with double shafts. On the shaft, there are detachable fixed spiral leaves and washing shovels lined up with the most suitable combination. It is very easy to replace shovels and spiral leaves since they are detachable connected. These shafts are driven by motor, reducer and belt pulley system.
Request for a quoteROBINSON CO.
Turkey
It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls.
Request for a quoteKALSEDON STONE
Turkey
SIMPLE APPLICATION, KALSEDON STONE PANEL PREFERED TO MAKE YOUR SPACES BEAUTIFULL WITH SPECIAL DESIGN
Request for a quoteROBINSON CO.
Turkey
Pellet mill’s working principle is, mash feed is forced outward through holes in a ring die by the action of two or three rollers, which is then cut to a predetermined size. Before mechanical process, steam can be injected into the conditioner at temperature 85 degrees celsius. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories
Request for a quoteROBINSON CO.
Turkey
This hammer mill grinds easily raw materials which are dry and lle dampens fine. For this reason it is used in food industry.The body is of steel and weld construction. The hammers are on the rotor which turn a mill. The rotormill turns in the strong ball thrust. The hammers are made of hardened steel.It is designed turn free.The sieve is on the hammer mill and it is changed easily without stopping the rotor. Motor is connected directly to the coupling. The body of hammer mill is mounted on the same chassis. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories
Request for a quoteROBINSON CO.
Turkey
It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls. The bearings of the rolls are ductile iron and the arms of the rolls are conical. It is produced with gear drive and belt drive. It can also be produced with an optional touch control screen. Especially thanks to the side covers that can be opened one by one based on the opening system, it provides fast and easy access and the possibility of rapid ball removal with the cover opened on the ball.
Request for a quoteROBINSON CO.
Turkey
◾ Fully PLC controlled. ◾ Precision weighing and long life with stainless steel load cells. ◾ 5/10kg.-10/25kg.and 25/50kg. weighing December. ◾ Automatic filling into bags with an open mouth. ◾ Lower and upper tolerance values that can be programmed separately. ◾ Automatic sack shaking mechanics. ◾ Separate weighing container feeding system according to the type of product to be bagged. ◾ Double coil feeding driven by separate motor. ◾ Single coil feeding driven by two-speed motor. ◾ Belt feed driven by two-speed motor. ◾ According to the product to be bagged and the desired tolerance, 13-22 tons/hour (50 kg. capacity Decoupled in bags) between. ◾ Special system panel from IP54 protection class ◾ Regulation bunker weighing unit and special vibration units in unloading bunkers. ◾ Easy calibration with keypad. ◾ Height adjustable sewing machine column.
Request for a quoteZORLU DEGIRMEN MAKINALARI LTD. STI.
Turkey
In flour mills, the roller mill is used to break and crush the wheat. This is the most important machine of a flour mill. It consists of two pairs of parallel working rolls. The product that collects into the inlet glass moves the pneumatic pressure plates and the feed rolls start to feed the products homogeneously into the rolls. In the meantime, the gap between the rolls is reduced by pneumatic pistons and the product is ground by passing between the rolls. The bushings of the roller mills are spheroid casting and the rolls have conical arms.
Request for a quoteZORLU DEGIRMEN MAKINALARI LTD. STI.
Turkey
The hammer mill is used to shred / crush the products in smaller pieces by the repeated blows of little hammers.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TEMA METALURJI SAN TIC LTD STI
Turkey
As a sector; We serve General Machinery Manufacturing, Valve and Pump Manufacturing, Iron and Steel Rolling Mills, Railway Sector, Mining and Crushing, Energy Sector and Shipbuilding Sectors. As production; We produce castings in Unalloyed Carbon Steels, High and Low Alloy Steels, High Manganese Steels, Stainless Steels, Gray Cast Irons, Spheroidal Graphite (Sphero) Cast Irons, Ni-Hard Casting Heads.
Request for a quoteROBINSON CO.
Turkey
Molasses Mixer designed for homogeneous mixing of liquid sweetener to product additives in feed mill plants. U type body in Carbon Steel ST37 metarial up to requirement. Liquid with 1-11 % is mixed homogeneously. Maximum mixing is provided by heating molasses 40 - 42 degress. Applications Fields Food Business Industries Flour Mills Semolina Mills Seed Cleaning Facilities Malt Factories Feed Mills Corn Mills Grain Storage Silos
Request for a quoteROBINSON CO.
Turkey
The mixer is designed to homogenize the mixing of different raw materials milled to the mill with poor free flow during the process. Both types of mixing are possible with or without the addition of liquid. it provides a mixture of raw materials crushed with a precision of 1/100000. The loading time is reduced by pneumatic traps in a large area; and the unloading time is reduced by double unloading hatches that can be opened from end to end.The position/time increases with the time gained during the finishing process.There are 100% safe unloading housings that do not load Rotating equipment should never be opened unless the cycle is completed. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories
Request for a quoteROBINSON CO.
Turkey
It performs the task of separating the light grains and shells of the unwanted foreign substances from the grain with the air flow. The grain is spread over the bottom by a vibrating feeder and conveyed towards the air duct. It is washed by the air flow opposite the movement of the grain, which enters the air channel with a homogeneous distribution. In the meantime, unwanted light grains are separated from the grain by moving with the air. Applications Fields ◾ Food Industry ◾ Flour Mills ◾ Semolina Mills ◾ Feed Mills ◾ Grain Cleaning Plants ◾ Corn Processing Plants ◾ Oil Factories ◾ Plywood Factories ◾ Grain Storage Silos ◾ Corn Mills ◾ Corn, barley, rye, oats, and so on grain processing plants
Request for a quoteROBINSON CO.
Turkey
Low pressure aspirators are used in industrial establishments operating in the food sector, heating and ventilation facilities and in the casting industry. Aspirators, whose models are determined according to flow and pressure values, are used at different engine powers. It helps to classify products with air, especially in the cleaning and processing of grains in the food industry. Body and fan are manufactured with great precision and mounted on a strong steel base. Equipped with special blades and design, the fan can be easily installed and disassembled for high rotation needs. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories
Request for a quoteROBINSON CO.
Turkey
It is used to transport the products pneumatically to different points over a single line. It allows to change direction during transportation. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories
Request for a quoteROBINSON CO.
Turkey
The Conveyor used in grain, creals and food processing plants in the transport unit. Tube Conveyor is used for the horizontal transporttation of products in flour plants. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories
Request for a quoteROBINSON CO.
Turkey
The control sieve is used for the final control before packaging in the packaging unit of the flour factories. The product arriving at each passage of the square screen enters through the pressure pipe and moves vertically and horizontally through the pre-set flow paths along the passage. The final checks are made after the flour sifting process. The flour, whose last checks are made, is directed to the bagging process. Apart from flour and semolina factories, it is used in processing plants of wheat, corn and similar grains, in feed mills, in various food products processing plants for the final screening of mixed feeds and for the sifting of large-grain corn, crushed pellet feed, barley, oats and similar processes. Application Fields ◾ At flour mills: For wheat, corn and similar grain processing plants ◾ At feed mills: For final sifting of formulated feed meals, corn, crushed pellet feed, barley, oats and for removing the remained coarse materials after grinding and similar processe
Request for a quoteROBINSON CO.
Turkey
By separating the flour particles adhered to and remaining in the bran, it both prevents the loss of flour and increases the efficiency. Thanks to the special pallets on the rotor that rotates horizontally, the flour is separated from the bran while being thrown towards the screen. The centrifugal directed product strikes the pore size preselected screen. Thus, it is ensured that the flour particles are directed to the outside of the sieve and the bran to the outlet channel from the inside. Applications Fields ◾ Flour Mills ◾ Semolina Mills
Request for a quoteROBINSON CO.
Turkey
This machine is used in flour mills to separate the stuck core particles in the product coming from the roll. In this way, in flour production; Soft separation does not spoil the product. Both floor and ceiling hanging position shape, Right and left directions of spinner bars, Low power requirement, Coupling or pulley connection system Application Fields ◾ At flour mills ◾ At coarse and fine semolina passages ◾ After roller mills or before plansifter inlet
Request for a quoteROBINSON CO.
Turkey
Vibro Sieve; sticky filter flour and fine products from bran brushes, etc. It is used in the process of sieving the substances. Vibro Bran Brush; It separates the flour in the bran by 95% -98%. Application Fields Flour Mills Semolina Mills Corn Mills Feed Mills At food Processing Industry
Request for a quoteResults for
Mills - Import exportNumber of results
114 ProductsCompany type
Category