Machine cleaning - Import export

A wet blasting machine is a device used for cleaning surfaces by removing dirt, paint, orrust. It operates by combining pressurized water with a special abrasive material. It features a self-heating water capability and can use hot water and detergent. An intense mixture of water and abrasive is directed on to the surface, ensuring effective cleaning. It is commonly employed in industrial sectors and requires the use of appropriate protective equipment.

It is used to clean jet filter bags that lose their filtering function over time due to dust particles

The particulate filter cleaning machine is designed to clean the particulate filters of both passenger cars and commercial vehicles. The machine is completely made of stainless steel. With the water purification system, water in the tank is recirculated and cleans the inside of the particle filter.The machine starts the washing process by measuring the clogging rate of the filter after test button on the touch-operated display is selected. After the washing process is completed, you can test again and measure that the filter is cleaned. Then you can finish the washing process and proceed to the drying process. After drying the inside of the filter, the cleaning process is fully completed. There are bag and cartridge filters on the machine. Tank has heat insulation. The machine has lighting and a steam discharge fan. You can wash and dry 2 different filters simultaneously, as the machine has individual washing and drying processes.The machine exist in manuel and pneumatic.

Flowing the dry cleaning of wheat, it is used for the humidity of wheat with a little consumption of water and time. At the same time, the wheat is unshelled also because of the two rotor, which turns with high speed.It can add up to 7% of water in a single flow-through.

While the grain is carried upwards with the anchors made of hard material resistant to abrasion formed in appropriate dimensions on the rotor in an angled semi-cylindrical body made of stainless steel, the water is absorbed by the grain by subjecting it to intensive mixing at a measured speed. It is used in grain processing plants to ensure that the desired moisture content of the grains penetrate and feed the grain sufficiently. It brings the grain to be annealed with water and provides a homogeneous mixture. At the same time, a significant amount of peeling is ensured in the grain shell as a result of friction caused by the rotor rotating at high speed. Application Fields ◾ At food industry ◾ At the dry cleaning units of the flour and semolina mills ◾ At the grain processing plants where moistening process is required

The part washing machine is designed to easily clean dirty parts with a small size and complex structure in the shortest time possible. Thanks to its brush, the person performing the washing process can carry out any kind of cleaning in the dirty part in detail. It is an ideal parts washing machine for using in small areas.

The parts to be washed are placed on stainless steel rotative basket and are washed with water mixted with degreaser under high pressure. Washing is done in order to clean oil, sawdust, dirt and wastes on dirty surfaces from different angles by means of time-adjusted pressurized water nozzles according to the part structure and pollution rate. By filtering the water with the recirculation system, the machine is designed to wash parts with minimum consumption of water, detergent, electricity and time.

Torque Converter & Welding Testing Machine

The grain separator is used to separate small and big foreign materials (paper, straws, corn, soil etc. ) from the grain. The product is evenly distributed on the sieves by the adjustment gate at the grain intake as well as the distribution devices on the sieves. The machine consists of a vibrating body installed on a stable chassis. It is driven by two symmetrical vibration motors. The vibration level of the machine is adjusted by changing the inclination level of these motors. Rubber vibration dampeners are used to isolate the vibration. There are two layers of sieves in the grain separator. While the first layer separates the particles bigger than the grain, the second layer separates smaller particles. The grain separator has to be used with an air-channel or radial air separator. This way, the light particles are removed as well.

Our Beach Cleaning Machines have a working depth of 15cm and a working width of 140cm. Thanks to its special vibration-driven sieve system, it collects/cleans objects such as cigarette butts, garbage, stones, etc. In addition to its cleaning function, it ensures that the surfaces of the beaches have a smooth sheet-like appearance. It has a tank volume of 350 liters. It cleans an average of 7,000m2 area per hour. Our galvanized materials allow the machine to be minimally affected by salt and moisture. Minimum Power: 50-60 hp Length: 220 cm Width: 160 cm Height: 155 cm Storage: 350 lt Weight: 560 kg Working Depth: 15 cm

It is used in the grain processing plants in order to moisture gradient into the grain

It is used in the grain processing plants, to ease the grain processing by neat and non-stop annealing and washing

It is used in the grain processing plants to moisten the grain at a desired rate

It is used in the grain processing plants to moisten the grain at the highest desired rate up to rate of % 5-6.

DOLFİN-KBN1 series parts washing machines are used before and after overhaul in repair and maintenance services, especially for washing large and heavy parts. Apart from revision workshops, it is also used for cleaning the surfaces before assembly or packaging in enterprises and factories that produce parts in series. They are special devices designed for large sized and heavy parts such as engines and parts of construction machines, power plant turbines. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned.

DOLFİN- KBN2 series parts washing machines are especially used for washing parts that require rinsing, passivation or other processes after washing, as well as large and heavy parts. While it is desired that there is no oil and other impurities on the surface before assembly or packaging in enterprises and factories that produce parts in series, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part depending on the place of use of the part. For this requirement, a 2nd stage rinsing or a similar application is mandatory. Our KBN 2 series part washing devices are a special device containing more than 1 tank and/or bath. The parts placed in the device are rotated on its own axis by means of the washing basket, while pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the part is cleaned.

Stainless Steel Body High Pressure Pump Test Report Printer PLC, Android Temp. Control Water Level Sensor Timer, Alarm Water Filters(10 and 100 micron) 250 Lt Tank Pneumatic Door Hot Dryer CE Electric Panel All Apparatus included

Stainless Steel Body High Pressure Pump Test Report Printer PLC, Android Temp. Control Water Level Sensor Timer, Alarm Water Filters(10 and 100 micron) 250 Lt Tank Manual Door Hot Dryer CE Electric Panel All Apparatus included

AREAS OF USE - Automotive industry - Aircraft industry - Ship industry - Defense industry - Metal industry PRINCIPLE OF OPERATION The parts to be washed on the basket placed on a stainless rotary platform with a sliding system are subjected to rotary basket washing with water with high pressure detergent in a closed cabin to be placed. Washing process is carried out to clean oil, sawdust, dirt and waste from dirty surfaces from different angles by means of time-adjustable pressure water nozzles according to the part structure and pollution rate. By filtering the water with the cycle permanent system, it is designed to reduce the consumption of water, detergent, electricity and time (labor) with the least consumption of parts. OPTIONAL FEATURES - Steam Evacuation Unit - Stainless chrome body structure - Basket structure - Number of nozzles - Liquid level control system All kinds of parts washing machines can be manufactured in our company upon request.