Tubular in stainless steel - Import export

SHELVES WITH TANKS LIQUID WASTE SERIES FPB801/802 Modular system consists of a structure in tubular steel, a collection tank and a floor grid support. The tubular structure is available in versions for single or double barrel and it is stackable, making it possible to safely store up to 4 drums. Containers of liquid pollutants must be stored safely, in particular to prevent any contamination of aquifers. The collection tanks are watertight, coated with epoxy powders and the support surface is grilled galvanized. Warning: prices are valid for the individual modules to be combined.

Fine bubble aeration system for lagoons & large surface area ponds. HDPE Floating Feed pipe sized to provide the required air flow Air supply pipe to difusers Aquatube 70 type Tubular Diffusers Stainless Steel Diffuser Feed Section Concrete ballast to stabilise the diffuser assembly Cost-effective solution Low maintenance Specific modular system Adaptable to any lagoon or large pond Low maintenance requirements Very reliable system easy to install and operate Very competitive design and scope of supply Significant mixing of the total volume within the lagoon The active biomass is aerated effectively and efficiently.

CSN® tank heating units are particularly suitable for the direct heating of liquids (Oil, Water, Emulsions), air and gases. They contribute to the avoidance of paraffin clouds in fuel oil or Diesel storage tanks. In relation to the process, we provide you with tank heating units with tubular heating elements made of stainless steel which we adjust to the respective application situation and the medium to be heated in consultation with you. We offer our series “THF” a suspended, on a chain flexible solution to keep heating oil or diesel fuel in the extraction line pumpable. As a fixed version, we recommend our industrial immersion heaters for heating liquids. Further information about our CSN® Tankheizkörper

Screw-in Tubular Heaters are the standard solution for all heating processes with liquids or gas. The heater is installed in a tank or a tube system by the G1½" screw fitting. The IP54 connection head, fitting and tubular heater consists of stainless steel. The tube sheath material 1.4529 is resistant to sulphite, phosphors and hydrochloride media.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The construction of RiRo-nta is identical with RiRo-nt except for the fact that heating power can be steplessly regulated by our built-in thermostat. It keeps the temperature of your choice constant between +5°C and + 30°C or just protects your room from frost. The red signalling light shows when power is on.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With these heaters the excess temperature touching the top of the fins does not exceed 67K (difference of 67°C to room temperature).

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The heater RiRo-fa is identical with type RiRo-f, but additionally heat transfer can be controlled steplessly by our built-in thermostat. According to your needs the heater will keep the room frostprotected or the temperature will be kept constant at your choice between + 5°C and + 30°C. Applicable for rooms with risk of fire. Max. 115°C on top of the fins.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. RiRo-F for rooms with fire risk: the economic choice for rooms where a “full range” heating is not needed, e.g. to protect your rooms or your valuable facilities against frost. To keep below the reduced surface temperature of 115°C we chose appropriate power layout. Max. 115°C on top of the fins.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. Universal features: for power types 1000 W to 3000 W the connection can be fitted with either 230 V or 400 V 3(N) ~. On request: for special applications all types are available in special voltages or different high-grade steel qualities, e.g. for food- or off-shore-industry.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The heating power is steplessly adjustable and the thermostat keeps your chosen temperature constant. Choose either frost protection or your temperature between + 5°C and + 30°C. The red signalling light shows when power is on.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With the built-in three step switch heating power can be adjusted according to actual requirements. This helps saving energy! Step I 1/3 of heating power Step II 2/3 of heating power Step III 3/3 of heating power

CJS 25 HI is an electronic dosing device with load cells for semi-automatic filling of bags with max weight 25 kg. Hopper capacity 300 l, bags weight 2-25 kg. The machine is suitable for the automatic dosage of granular products with a good flowability. The dispenser is mainly formed by a welded and painted tubular steel, stainless steel, loading hopper with pneumatic closing, fast discharge channel, slow discharge channel with vibrator to achieve the exact weight, weighing hopper installed on load cells, pneumatic device for locking the empty bag, PLC operator interface and user-friendly keyboard. The dispenser can be combined with a motorized conveyor for automatic loading of the product and to a free or motorized conveyor for unloading the full bag, it can also be combinated with an automatic packaging machine. All parts in contact with the product are made of stainless steel. Ideal for packaging of pellets, granulated foods, dried pasta (short), cereals, coffee, nuts, sugar, etc.

Kullen-Koti roller brushes 302 are indeed unique and easy-to-handle: you only purchase the roller brush core once and easily refill it yourself with the corresponding strip brushes after wear. And besides, it is a very economical brush system. The ruged construction allows problem-free operation also in adverse conditions. Roller brushes type 302 consit of a tubular steel or stainless steel core and exchangeable strip brushes which are mounted in axial direction around the circumference. The brush core can be supplied either with journals or with arbor hole for mounting on the existing primary shaft. With the roller brush type 302 (mS) the strip brushes are fixed in side flanges. With type 302 (oS) the strip brushes are fixed directly on the tubular core with clamping plates. Fill configuration to choose: bent in axial direction, left-hand or right-hand pitch or in chevron pattern i. e. left hand and right-hand pitch starting at the centre. Strip brushes needed around the...

Square stainless steel tubular heaters BASE-flex (1.4541) are a reliable industry standard for the use in heating platens and manifolds. In contrast to traditional tubular heaters with a round section which have to be bent by machines, square BASE-flex can be fitted into any rectangular groove with simple hand tools. Moreover, the square shape results in a bigger heat emitting area of up to 80% compared with a corresponding round section. Finally, the easy manual mounting saves the usually high technical expenditure for casting-in / soldering / cementing of bent round tubular heaters. A soft version of the BASE-flex, the NICKEL-flex (2.4068) is available as special execution. Due to the soft, easy to form nickel material, the NICKEL-flex is suitable for manual mounting with hand tools in round sections, too. Furthermore, Nickel has a better capability to conduct heat compared with stainless steel.

CSN® screwin heating units are particularly suitable for the direct heating of liquids, air and gases. In relation to the process, we provide you with screwin or tank heating units with tubular heating elements made of stainless steel which we adjust to the respective application situation and the medium to be heated in consultation with you. The surface loadings, a very critical design feature for the longterm durability of the elements, are calculated for their specific application. For exact temperature monitoring, the screwin heating units can be manufactured with various controllers and / or limiters, as well as PT100 sensors or sheath thermocouples. Our team also looks forward to standing by your side if you need heating solutions which cannot be covered with socalled standard solutions. We are happy to develop processcustomised solutions in close consultation with you. We look forward to your task.

Suitable for kitchens and food laboratories. Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY - WITH UNDERCOUNTER Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The lower floor is reinforced and soundproofed at high capacity. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with widths of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm.

Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with width of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm. The load varies mainly depending on the width of the plan.

CNC Milling stainless steel 304 plate

CNC Milling stainless steel 304 parts

Stainless steel is a very common material to use in fabrication projects, thanks to its versatility and durability, among others. Stainless steel possesses high good corrosion resistance which makes it the primary option for industries such as pharmaceuticals, food, petrochemicals and machinery.The versatility of stainless steel requires different fabricating techniques. Stainless steel is a sensitive material which requires delicate weld preparation practices such as thorough surface preparation prior to commencement of welding. Shoddy surface cleaning may compromise the material features such as corrosion resistance. Stainless steel has definite advantages over other metals and, it’s one of the most expensive metal. This high cost puts additional pressure on fabricators to be more careful in fabrication processes. Stainless steel should be fabricated in a specialized clean workshop to prevent contamination. Also it required specialist steel contractors

CNC machining stainless steel 304 part

CNC Turning stainless steel 304 gear part

Etched stainless steel 304 plate

Etched stainless steel 304 gasket

CNC Turning stainless steel pipe

CNC Turning stainless steel part

Hand riveters are essential tools for anyone who needs to join two materials together permanently. These tools work by compressing a metal rivet through two or more layers of material, creating a secure and permanent bond. Hand riveters are used in a wide range of industries, including construction, metalworking, and automotive repair. They are especially useful when working with materials that cannot be easily welded or screwed together. Equipped with 4 heads of different sizes, Ronix RH-1604 is ready to help you in your next repair or maintenance work.