Results for
CTRA
Tunisia
CTRA studies and proposes technical solutions for the transfer of all fluids over long distances, combining chemical compatibility with mechanical and abrasive resistance to ensure a long service life without routine maintenance. The reference project carried out by CTRA in 2006 on behalf of OCP Morocco, which involved the construction of two Ø1800 phosphogypsum discharge lines with a total length of 8km, is a perfect illustration of this. These pipes combine chemical, abrasive and mechanical resistance, and were buried at a depth of more than 12m to ensure a gravity flow rate for a charged fluid. This project required the processing of 3400 tonnes of GRP vinylester over 24 months and was the subject of a case history.
Request for a quoteOCV ITALIA
Italy
Windstrand® 2000 features a powerful combination of optimized design and reliability for longer, lighter blades. Windstrand® 2000 delivers high weaving efficiencies. The product allows blades to operate in extreme environments at reduced operating costs. We’re happy to offer Windstrand® 2000 in all regions. Packaging (Standard Reference) Rovings are available in a singleend internalpull package. Each pallet weighs approximately 1 ton. Pallets are stretch wrapped for load stability. All doffs are wrapped with TackPak™ for protection and to aid package runout and transfer. Full doffs are approximately 2021 kg (45 lb.) and they can be packaged in bulk or CreelPak™ format. Standard Package Cylindrical bobbin without tube, Outside Diameter (OD) ±270mm, height 260300mm. Partial bobbins have smaller diameter. Max bobbin weight approximately 21kg. 600 Tex and greater. Bobbin covered by a TackPack™ film. Pallet Size 1150x1150mm, 4 ways entry.
Request for a quoteOCV ITALIA
Italy
PulStrand® 4100 is specifically designed for fast wetout, good processing, high glass loading and excellent laminate properties, to maximize customers’ processing and minimize their processing costs in pultrusion applications. OUTSTANDING MECHANICAL PROPERTIES Excellent shear and flexural properties in major resin systems, provide maximum part strength and long part service life. REDUCED COST Fast, uniform strand wetout leads to higher glass loading, reducing resin demand; fast wetout also increases production speed and productivity resulting in reduced manufacturing cost. MULTIRESIN COMPATIBILITY Excellent glass/resin bonding in polyester, vinyl ester, polyurethane, acrylic, and epoxy resins, providing the processor maximum flexibility with one input glass. This reduces cost with less inventory to carry and eliminates the need for costly downtime and labor to change input glass during job changes. Suitable for LFTP PA compounding applications
Request for a quoteOCV ITALIA
Italy
PipeStrand® S1000, made for fabricators that want to reduce material cost, while increasing product performance. Designed to provide excellent hydrostatic bases, fight corrosion, increase efficiency and service life in the lowpressure filamentwound pipe, tank and vessel markets OUTSTANDING MECHANICAL PROPERTIES Excellent shear and hydrostatic properties in all major resin systems, provide maximum part strength, long service life and hydrostatic design basis. REDUCE COST Fast, uniform strand wetout in all major resin systems, results in optimized part production speed and increased productivity, reducing manufacturing costs. MULTIRESIN COMPATIBILITY Excellent glass/resin bonding in polyester, vinyl ester, polyurethane, acrylic, and epoxy resins, providing the processor maximum flexibility with one input glass. This reduces inventory and eliminates the need for costly downtime and labor during product change overs.
Request for a quoteOCV ITALIA
Italy
PipeStrand® S2300 is made for fabricators that want to reduce material cost, while increasing the performance of their filament wound products. Designed to increase production efficiency, while providing excellent hydrothermal stability under pressurized conditions. OUTSTANDING MECHANICAL PROPERTIES Excellent properties in both amine and anhydride curing systems; improved axial tensile strength, interlaminate shear strength and burst stress for high performance filament wound epoxy applications. REDUCE COST Designed for use in filament winding, in both epoxy amine and anhydride curing systems — giving flexibility with one glass input and higher glass loading. GREAT STRAND WETOUT Excellent processing range, fast wetting and smooth pipe surface. LONG SERVICE LIFE Excellent hydrothermo stability and strength retention under pressurized conditions, leading to long service life for installed pipe.
Request for a quoteAPLAST D.O.O.
Slovenia
APLAST Floaters for the floatation of hoses and cables. Are easy to install solution that allows pipes to bend and flex while maintaininglow resistance to waves, wind and current. Standard for dredging and marine applications. Floater are either from two halfs or monolite. Floater kit: - 2 pipefloat halfs - Assembling kit including bolts, nuts, washers - Stainles steel kit Marine Grade, SAE316 for corrosive environments available as optional at an additional cost. Specifications: - Manufactured from polyethylene - Different colors options - All floats are pressure tested prior to dispatch
Request for a quoteHF HAYTEK PLASTIC AND PLASTIC MACHINERY CO.
Turkey
Planetary saws, equipped with disk and milling cutter for cut and chamfering of PVC pipes (rigid and foam) or other plastic materials; Swift replacement of tools, even with pipe in movement; Pipe blocking vices or iris mechanism jaw system. Suction device with double filter and sound-proofing; Automatic synchronisation with extrusion speed.
Request for a quoteHF HAYTEK PLASTIC AND PLASTIC MACHINERY CO.
Turkey
Independently driven caterpillars using Asynchronous and Servo motors. They allow a constant pulling power. Furthermore, they reduce energy waste and the number of moving parts subject to maintenance. Long caterpillar contact length assures a good grip on the pipe and provides considerable pulling power. Caterpillars bow profile. The shape reduces stretching and wear of the caterpillars, thus prolonging the life of the machine. Motorized positioning of lower caterpillars that can be adjusted according to the diameter. Chain conveyors with neutral rubber pads on chains that do no mark the pipe. High torque can be obtained at low line speeds in servo motor haul off.
Request for a quoteHF HAYTEK PLASTIC AND PLASTIC MACHINERY CO.
Turkey
Automatic threading machines for in-line and stand-off operation, suitable for PVC electrical, gas and water pipes(produced in single or double extrusion). Outside and inside threading (through removal of material) simultaneously on both ends. Independent motorization of the two threading groups by spindle motors. Adjustable threading length. Adjustable thread depth. All sizes adjustment can be done on touchscreen panel. By the iris mechanism Clamping of the pipes during the threading phase. High output and thread sensitivy. Simple utilization, efficiency, minimal maintenance. Optional Servo Threading System. Pipe feeding and Pipe Stocking Table. Clean working area with hermetic design.
Request for a quoteKOREMA® GMBH & CO. KG
Germany
Multilayer Fabric Expanison Joint, coated with silicone
Request for a quoteKOREMA® GMBH & CO. KG
Germany
Expansion joint to compensate movements and thermal vibrations
Request for a quoteKOREMA® GMBH & CO. KG
Germany
for Food application designed compound material. Washable, White, plane, without pleats
Request for a quoteMASFEN MANUFACTURING
Turkey
Extruder machine is used for melting, mixing plastic material. Masfen produces specific screw and barrel for material type, that provides perfect mixing and homogeneous. Our Extruders has 50kg/h to 1000kg/h capacity for PE,PEX,PP,PPRC type plastics.
Request for a quoteEC PLAZA
South Korea
1. CUSTOMIZED RUBBER MOLDED PARTS - AUTOMOTIVE, ELECTRONIC, TRAIN, INDUSTRIAL PARTS - ASTM, MIL-SPEC, ALL OF THE AUTOMOTIVE SPECIFICATIONS, - ROHS, REACH, CAL-65 2. SHEET RUBBER FOR INDUSTRIAL PRODUCTS 3. TITANUM PLATE AGNET FOR POSCO Daehun Inc. has been supplying a wide range of rubber molded parts and sheets from China worldwide mainly in North America and Europe since 1990. - Daehun is manufacturing rubber molded parts for automotive & industrial and make constant efforts to sustain high-quality level for customer satisfaction firstly. - Daehun has the newest rubber test equipment and professional manpower in this field. Our development/quality control team meet the quality customer requires and provide benefit to customers by cost-reduction at the same time.
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion profiles,pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides,we can produce plastic extrudsion products from materials of PVC, ABS, PP,PE,PC,PMMA, AS /PE... The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. We provide a variety of extrusion process processing, cold extrusion, hot extrusion, two-color co-extrusion, three-color co-extrusion, soft and hard co-extrusion,can meet customer requirements of different products processing needs! If you need any plastic extrusion profiles,welcome send your drawings and samples to us for a quote.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV PVC Deep Junction Box 4Way Entries Features: AS/NZS 2053.2:2001 standard.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV PVC Junction Box 4Way Entries Features: AS/NZS 2053.2:2001 standard.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV PVC Deep Junction Box 2Way Entries Features: AS/NZS 2053.2:2001 standard.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV PVC Junction Box 2Way Entries Features: AS/NZS 2053.2:2001 standard.
Request for a quoteNEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV PVC Deep Junction Box 1 Way Entry Features: AS/NZS 2053.2:2001 standard.
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Custom PVC Extrusion Pipes - 20 years of experience in Plastic extruding Services. Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides from PVC resins. The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. The Plastic Extrusion profiles widely use for auto parts, light rail train fittings, lamps and lanterns, refrigeration industry, household electrical appliances, stationery, warehousing and other enterprises to provide quality support services. If you need any plastic PVC extrusion pipes or complicates structured profiles,welcome send your drawings and samples to us for a quote.
Request for a quoteYALÇIN BORU GEOTHERMAL
Turkey
HDPE pipes manufactured in TS EN 12201 – 2 and TS EN 253 standards and between PN 2.5 – PN 25 pressure ranges are one of preinsulated pipe types.
Request for a quoteYALÇIN BORU GEOTHERMAL
Turkey
Pre-insulated Glass Fibre Reinforced (Composite) PPR Pipes
Request for a quoteDEKS INDUSTRIES EUROPE
United Kingdom
EPVC and EPDM pipe couplings and adaptors including large diameter standard couplings up to 4m diameter.
Request for a quoteResults for
Tubes%20and%20pipes-%20rubber%20and%20plastic - Import exportNumber of results
41 ProductsCountries
Company type