Trappings - Import export

Fast, safe and animal-friendly trapping in a row by mandatory sequence. Immediate and simultaneous release of goats and sheep after the end of milking, which manages to minimize animal stress. Combines its traps with milking equipment with buckets or with a fully automated milking system.

Design and manufacture of safety harnesses and fall arrest harnesses.

Spring and body grip traps are used for humane trapping of animals. Characteristics Frame steel wire with a diameter of 58 mm; Weight 0.6 – 2.07 kg Passage way size 140 – 320 mm

Mediterranean Fruit Fly Pheromone Trap Includes 1 funnel trap + 2 pheromones. Pheromone traps: Pheromone produced according to the type of pest (specially produced in laboratories) chemical and thus attracts male insects to stick to the adhesive In this way, the female species can not mate with the pest is destroyed. The insects will not be able to find and breed the female insect species in your field due to pheromones. Mediterranean Fruit Fly Trap Usage: It is recommended to install it before the pests are derived. Thus, the dose of the capsule impregnated with pheromones is harmful. The capsule should be checked by hanging it in the appropriate place. Note: Secretion that allows pheromone male insects to find the female species. For one decare, 4-5 Mediterranean fruit fly traps are enough. #mediterranean #fruit #fly #trap #frutta #Obst #Fruta #фрукты #Fliegenfalle #Armadilha para mosca #Ловушка для мух

Dimension: 30cm × 100m Color: Blue Material: Polyethylene (PE) Target: Thrips, Houseflies and other pests. Purpose: Mass-trapping Application: Sticky traps (roll type) are attached to the structural elements (columns, pillars) of greenhouses and are placed parallel to the rows of cultivated plants. Traps should be placed slightly above the plants. In gardens tapes could be stretched between trees. Also tapes can be wrapped around a tree trunk to protect from insects rising from the ground. Recommended Quantity: 150 meters per 1000 m²

Dimension: 15cm × 100m Color: Yellow Material: Polyethylene (PE) Target: The Whitefly, Aphid, Fruit Flies, Thrips and other pests. Purpose: Mass-trapping Application: Sticky traps (roll type) are attached to the structural elements (columns, pillars) of greenhouses and are placed parallel to the rows of cultivated plants. Traps should be placed slightly above the plants. In gardens tapes could be stretched between trees.Also tapes can be wrapped around a tree trunk to protect from insects rising from the ground. Recommended Quantity: 150 meters per 1000 m² #yellow #sticky #roll #trap #أصفر# لزج# لفة# فخ #желтый #липкий #рулон #ловушка #jaune #collant #rouleau #piège #amarillo #pegajoso #rollo #trampa #armadilha #rolo

Dimension: 10cm × 25cm ▸ Color: Yellow ▸ Material: PVC or Paper ▸ Target: White Fly, Tuta Absoluta (tomato pinworm), Aphids ▸ Recommended Quantity: 150 pieces per 1000 m²

Dimension: 15cm × 100m Color: Yellow Material: Polyethylene (PE) Target: The Whitefly, Aphid, Fruit Flies, Thrips and other pests. Purpose: Mass-trapping Application: Sticky traps (roll type) are attached to the structural elements (columns, pillars) of greenhouses and are placed parallel to the rows of cultivated plants. Traps should be placed slightly above the plants. In gardens tapes could be stretched between trees.Also tapes can be wrapped around a tree trunk to protect from insects rising from the ground. Recommended Quantity: 150 meters per 1000 m²

Crab Cage Trap DSTC-41 90 x 45 x 40cm

Crab Cage DSTC-39 90 x 45 x 40cm

Crab Cage DSTC-38 60 x 43 x 43cm

Quality crab cage, made of steel wire diameter: 75cm height: 30cm twine:380D/24ply mesh:100mmstr frame: 6mm weight: 1.64kgs

Crab Cage DSTC-14 Quality crab cage, made of steel wire diameter: 80cm height: 30cm twine:380D/21ply mesh:50mmstr weight:2.6kgs

Crab Cage DSTC-12 Quality crab cage made of steel wire length: 80cm height: 33cm bottom wideth: 40cm top wideth: 30cm twine: 380D/30ply mesh:20mmstr weight: 8.3kgs with escape hole, entrance with square mesh, which is easy for crab to go into the cage

Crab Cage DSTC-13 Quality crab cage, made of steel wire diameter: 66cm height: 2cm net: steel wire weight: 7kgs with escape hole, diameter 12cm the entrance: 22cm x 12cm

Crab Cage DSTC-11 Quality crab cage made of steel wire length: 80cm height: 33cm bottom wideth: 40cm top wideth: 30cm net: nylon knotless weight: 9.5kgs mesh: 25mmstr with escape hole, entrance with diamond mesh, which is easy for crab to go into the cage

Electrostatic Capacity Sensor Any condensate from compression process can be sensed correctly and discharged. Zero loss of compressed air Uses of two sensors (High level, low level) protects energy loss By air loss discharging condensate selectively. * Our Company We have been worked for efficient treatment of condensation water generated in Air Compressor System. We are producing Auto drain trap that is an economical and reliable condensate discharger, Oil-water separator that is processing unit for condensate contaminated by oil with advanced technique and know-how. However, energy and environment are giving big influence in enterprise activity in 21th century industrial field, and it is considered that frugality of expensive compressed air and processing for contaminated condensate are helpful to solve these troubleshooting Forward, we will do our best to answer customer`s cheering by developing product helpful for enterprise activity. Website : http://www.enesystem.

Quality crab cage, made of steel wire, length:62cm, width:42cm, height:16cm, middle height: 21cm, mesh size: 20mmstr, frame: 5mm with escape hole, entrance with square mesh, which is easy for crab to go into the cage, the bait bag 15cm x 8cm

Quality crab cage, made of steel wire, length:55cm, width:40cm, height:27cm, twine 380D/30ply, mesh size 40mmstr, frame: dia.7mm with escape hole, diameter 6.8cm

Special for spinach.Machine comprised pre washing and washing tanks, pumps that allow for the creation of turbulent flows, some insect trap and propeller to make the leaves plunging in the turbulent bath. Recovery of the water in a settling tray at the outlet of the washer and filtering of the water with a wire rotating drum and its scraper in order to separate the waste. Circulation of water in a closed loop for low water consumption.

The majority of consumption went to heat production, which represented 61.8%. Pellet consumption for heat can further be divided into three markets – residential heating (69%), commercial heating (19%) and heat generated from cogeneration (12%). The remaining 38.2% of wood pellets were used for power generation. It should be noted that the technologies for producing energy from pellets for heat, electricity or both are mature and offer efficient and reliable processes. Three pellets

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 30 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 30. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - Intumescent gas, smoke and flame tight seal in case of fire - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards - Quick and easy installation The 60-minute ceiling fire dampers are designed for installation in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against fire progression from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms. The safety catching arms ensure that the lid is intercepted every time the hatch is opened. The lid is easy to remove and replace.

Cost-effective solution for fire-protected shaft walls - With peripheral lip seal (silicone) against smoke penetration - Quick and easy installation. Fire resistance on duct side and room side NF EN 1634-1 : +A1 : 2018 The inspection hatch is specially designed for installation on technical ducts with one of the requirements "external and internal heat load of the duct" and a fire resistance class EI 30. It offers a safe protection against the spread of fire from a room into the duct or counteracts it. The aluminium mounting frame is equipped with a fire protection strip. The cover of the inspection hatch is filled with DF fire protection plates and protected against the passage of smoke by a four-sided circumferential seal. The cover is secured on both sides by self-adjusting safety arms. These safety arms ensure that the cover stops every time the door is opened. The cover can be easily removed and replaced

Door for technical ducts - White lacquered RAL 9016. - Non-detachable leaf - Left or right hand installation - Leaf with fire protection SOFTLINE 60 minutes fire resistant inspection hatches are specially designed to be integrated into the walls of technical ducts with a minimum thickness of 25 mm and meet the requirements of fire resistance class EI 60. They provide protection or an obstacle to the spread of fire from a room into the duct. The metal surface of the powder-coated frame hides the opening in the wall, providing a harmonious appearance. The lockable square key lock prevents opening by unauthorized persons. CSTB certified, PV No. RS-19-067. Customized dimensions on request within the maximum dimension allowed by the PV. Sizes: 2 plates of 12.5mm - Certificate EI 60 200x200 300x300 400x400 500x500 600x600

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboard Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018EN 1634-1: +A1: 2018 Fire dampers EI 60 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 90 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 90. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018 Fire dampers EI 120 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 120. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.