Results for
ZEMO VERTRIEBS GMBH
Germany
The most accurate digital torque tester with Fail Safe Engineering! - Greater accuracy and durability with simplicity and ease of operation - Floating decimal point, 6 digit display is easy to read - Accurate to ± 0.25% (indicated value) from 10% to 100% - Over capacity alert and tracking System 8 error proofs your error-proofing program by letting you know when the unit has been stretched to 120% or more of capacity and may no longer be in calibration. System 8 has an LED that flashes red to alert you to the problem. It doesn’t stop until you reset the unit. The display also tells you the unit has been stretched over capacity. System 8 captures the over capacity data even if the memory was turned off. If memory was turned on and the unit is pulled over 120% capacity and a worker tries to erase the memory to stop the LED from flashing, the display tells the worker to “See Supervisor 120% Over Capacity”. No other torque tester on the market does this.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
This high-accuracy digital torque screwdriver tester with loading device eliminates measurement errors. The loading device keeps stable measuring conditions to avoid reading errors. Can also calibrate small capacity torque wrenches using optional TDTLA. The measuring range is wide and applicable for various types of torque drivers. Comes with Pass/Fail judgment feature. Judgment results are shown in three colors (white/red/blue), for easy result recognition. Key Features: - Bi-directional measuring – CW and CCW - Measuring modes: Peak, Run (Track) - Status indication in 3 colors (white/blue/red) - Accuracy ± 1% + 1 digit - Upper/Lower Limit: 10 settings - Statistical processing: samples, max, min, mean value - Memory for 1000 readings (99 in M99 mode) - RS232C / USB output for serial data transfer to printer or PC.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Digital Torque Gauge with flip-up Display High precision handheld digital torque gauge with integrated LC display to measure small torque. Ideal for measurement, inspection, and tightening of precision machineries and electric devices. Flip-up display can be adjusted for optimal reading and accommodates various testing positions. BTGE(-G) series products are manufactured for the global market and offer a selection of SI, metric and American units of measurement. Equipped with SI calibration as standard. Optionally available with calibration in imperial (ozf·in, lbf·in) or in metric (kgf·cm) units. There are various application types, even for measuring rotating objects. Combined with Measurement Board (No. 809), it can be fixed to use as torque screwdriver checker, etc.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Digital Torque Gauge with pull-out LC Display High precision handheld digital gauge with integrated LC display to measure small torque. Ideal for torque measurement like rotating torque, click torque of precision machinery, electronic devices, and various assembly components. The digital display simply slides out of the housing and is attached with a curly cord. Use the optional testing stand to secure the gauge while testing or add fixture to secure your test piece. Combined with Measurement Stand (#808), it can be fixed to use as torque screwdriver checker, et al. ATGE-G series devices are manufactured for the global market and offer a selection of SI, metric and American units of measurement. Equipped with SI calibration as standard, optionally available with calibration in anglo-saxon (ozf·in) or in metric (gf·cm) units.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
High precision Torque Gauge Suitable for fine torque measurements required in inspection, research and assembly of small parts, such as precision instruments, electronic products. Graduation and memory pointer on the body side ensure excellent visibility from different operating positions. There are various application types, e.g. for measuring rotating objects, or also for measuring torque on orthodontic springs, et al. BTG models have a three-jaw chuck which firmly grasp the object. Main body and chuck are locked when pushing “push lock button”. Push lock button makes body and chuck secured while using chuck. Key Features: - Accuracy ± 2% - Bi-directional torque indication – cw / ccw - Dial scaled 270 degrees each direction, built-in overload protection - Models with -S suffix have additional memory pointer in top display - Equipped with 3-jaw steel chuck.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ZEMO VERTRIEBS GMBH
Germany
By measuring torque, the CapStar can ensure the correct level of tension is in place on a wide range of caps and closures such as on medicinal or cosmetics containers, drinks bottles or food jars etc. With the CapStar’s clear display and easy-to-view torque results, operators are able to guarantee production quality whilst ensuring contents – which could be potentially harmful – remain sealed and secured. The CapStar helps to ensure the safety of products, prevent leaks and reduce the ergonomic issues associated with these products without compromising on safety, quality or freshness. For optimal power management, the CapStar automatically switches to the highest voltage power source to save on battery life, yet still giving the option to pick it up and unplug to seamlessly run on battery power. The CapStar is supplied with an adjustable component fixture for measuring bottles and containers, and is available in 2Nm, 4Nm and 6Nm ranges.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Digital torque meter with data processing function. Tohnichi's TME3 is suitable for checking torque on bottle caps, starting torque test, strength test, and twisting test, etc. Designed to measure rotating torque of precision parts. Ideal for cap testing. Intuitive icons indicate modes: Run, Peak, 1st 2nd Double Peak, Data/Parameter Setting. The 1st and 2nd peaks holding function, especially for bottle cap measurement. Can detect primary peak opening torque (when cap begins turning) and secondary peak (when bridges break). The drop width required for peak detection can be set to prevent mistaken detection of the unstable region. Easy to read LC display gives reliable visibility. Special teardrop shaped poles allows chucking from a minimum diameter of 7 mm to maximum 190 mm. Pole anchors use a corotation prevention mechanism to grasp your work firmly. With the optionally available calibration equipment, the tester can be calibrated by the operator himself if required.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
The only digital torque tester with Fail Safe Engineering! - Greater accuracy and durability with simplicity and ease of operation - Floating decimal point, 6 digit display is easy to read - Accurate to ± 0.5% (indicated value) from 10% to 100% - Over capacity alert and tracking - Meets or exceeds ASME B107.300-2010. Torq-Tronics 2 error proofs your error proofing program by letting you know when the unit has been stretched to 120% or more of capacity and may no longer be in calibration. Torq-Tronics 2 has an LED that flashes red to alert you to the problem. It doesn't stop until you reset the unit. The display also tells you the unit has been stretched over capacity. Torq-Tronics 2 captures the over capacity data even if the memory was turned off. If memory was turned on and the unit is pulled over 120% capacity and a worker tries to erase the memory to stop the LED from flashing, the display tells the worker to "See Supervisor 120% Over Capacity".
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Accurate torque wrench testing at a very affordable price! Sturtevant Richmont's VeriTorq is an excellent tester for intermediate checks (simple checks between calibrations) of all types of tools and for calibration of clicker-type torque wrenches and clutch-type torque screwdrivers. VeriTorq brings accurate torque wrench testing to the “That can save me money!” level – for companies large and small. If you have 10 or more torque wrenches that you send out for calibration – whether to the manufacturer or an independent laboratory – you can now bring those calibrations in-house and turn expense to profit. VeriTorq is so simple to use and so affordable that it can even be put at the assembly line for use at the start of each shift. How simple? Perhaps 15 minutes to install. Maybe another 15 minutes to learn to use accurately and efficiently. Four buttons operate everything simple. You could have your first two torque wrenches calibrated within an hour of opening the box.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Torque Readout with built-in Transducer. The basic, easy-to-use readouts include a built-in torque transducer and has a variety of measurement modes including track, peak, pulse and click. The ReadStar TT can be used as a portable device or fixed permanently using the mounting bars. The new and improved torque tester incorporates a bigger and clearer OLED screen display to view readings and results and the redesigned, easy to use keypad offers a familiar feel with simple function keys to effortlessly switch between modes and settings. The new internal memory now allows for a massive 999 readings to be stored and the addition of a new micro USB port allows for a wider range of connections for printing and exporting data. The new port also allows for additional power options. The ReadStar TT is supplied with a built-in transducer and a standard rundown adapter, and is available in 0.5Nm, 1Nm, 4Nm, 12Nm and 30Nm ranges. A premium joint kit is also available, sold seperately.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Digital Power Tool Tester with Pulse Counter Management of tightening screws begins on checking fastening tools. YET testers are designed for high precision torque control of mainly impulse type tightening tools. Also usable for angle nutrunners, screw drivers, ratchet wrenches etc. However impact wrenches can be tested also, you should not exceed approx. 2/3 of the testers rated capacity. Install the YET torque tester in a tool maintenance shop, test laboratory, or at production lines for effective control of fastening such as acceptance inspection, periodical check and torque adjustment. YET torque testers feature a parallel centronics printer port and a serial RS-232C computer interface enabling simultaneous protocol as well as external data recording. Key Features: High accuracy within R.O. ± 0.5 % (stat. Load) Large digital display (LED) Measuring time can be set by every 0.1 sec within 9.9 sec. Shut-off time can be set 1-2-3 sec.
Request for a quoteASG, DIVISION OF JERGENS, INC.
Italy
ASG DTT Series Digital Torque Testers are used for setting, verifying, and measuring torque. The ASG DTT Series are equipped with many advanced features including data collection. Portable and easy to use, these torque testers can test screwdrivers and manual tools, however, they are not for use with impact tools. Perform on-the-spot calibration with torque accuracy of +/- 0.5% full scale.
Request for a quoteResults for
Torquemeters - Import exportNumber of results
13 ProductsCountries
Company type