Top tubes - Import export

Top tube 12253 made of PVC for the floor sockets 7601A, 7602A, 7604A, 7701E, 7701M. For use in wet conditions when plugged in.

Super long-time grease with a synthetic base oil for extended relubrication periods. - salt water resistant - extremely adhesive AUTOL TOP 2000 is a special grease with exceptional adhesive behavior and pronounced extreme pressure properties - a real super long-term grease for significantly extended relubrication periods. It reduces wear under extreme conditions and is particularly resistant to washing out of the lubrication points. It is extremely resistant to salt water, cooling lubricants, pesticides and many detergents. Due to its composition and when used as intended, in accordance with the system manufacturer's regulations, it is physiologically harmless and is therefore also ideal as a lubricating grease for use in the food industry. Specifications / Approvals: KP 2 K-30 DIN 51 825 T.3

The Precision Tube is PAF's top-of-the-range technical product. It is manufactured to EN10305-2 standard and used in the best precision mechanical parts manufacturing plants in Tunisia and Europe. Drawing processes make it possible to obtain tubes specific to each application, by playing on steel grades, mechanical characteristics, reduced dimensional tolerances and final surface finish.

The screw conveyor conveys the material using the rotation of the screw blade and controls the discharge volume through the size and speed of the screw blade. There are two types of screw conveyor: U-shaped screw conveyor with top cover and tube screw conveyor. The advantage of the screw is that it avoids the dust problems specific to the outlet connected by a closed circuit. It is suitable for conveying various powders. The power end comes with different storage drum options.

Force-of-gravity separators, which are used as pre-filters or for the separation of large quantities of dust and swarf. Cyclone separator Cyclones are force-of-gravity separators. The separation principle is based on centrifugal force, which is produced by the tangential injection of the raw air. Cyclones are used as pre-filters or for the separation of large quantities of dust and swarf. The degree of separation of a cyclone is not normally sufficient to meet the usual environmental protection requirements. The cyclone exhaust air must be post-filtered in most cases. Product description A cyclone essentially consists of three parts: the intake cylinder, the cone and the immersion tube. In the intake cylinder, the raw air is brought into a circular path by means of tangential injection. Due to the taper of the subsequent cone, the speed of rotation increases sharply, so that the particles are pressed by centrifugal force against the outer wall and decelerated by friction, causing them to drop out of the air stream and fall down. The cleaned air leaves the cone in an upward direction via the central immersion tube. Cyclones are usually welded sheet steel structures. Cellular wheel sluices or, in individual cases, double-gate sluices are used for the pressureless discharge of the material. In order to increase the cyclone effect, or the degree of separation, counter-spirals with a pipe connection can be placed on top of the immersion tube. Further options are, for example, wearing devices, explosion pressure relief devices, control flaps, level monitoring devices and manufacturing in stainless steel or galvanised sheet steel.

The unique rounded-edge flip-top cap and lovely matted pink color base provide a better sense of touch and adorable apperance. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly use for hand creams, sunscreen, various facial cleansers, etc.

This is a modified design to CQ404+S4-8 and CQ351+S4-3. It has larger capacity compared to the later two and is ideal for customers looking for more design possibilities on the tube surface. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for body lotion, various wash & cleansers, etc.

The Main Features of this product is matching a Anti-reflux plug inside the cap, to avoid cosmetic contents reflux, and such Anti-reflux plug is optional. This exquisite cap goes well with the tube and adds a refreshing vibe to the product. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for various wash & cleansers, sunscreen, body lotion etc.

The novel design of the cap is very eye-catching. The lid open can be oriented to the front of the tube. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for various wash & cleansers, sunscreen, body lotion etc.

The sleek design of the flip top cap conveys a modern feel to the product. It is ideal for hand creams, sun screen, and facial cleanser products. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for cleansing, hand cream, sunblock, isolation cream etc.

This product has an unique flip top "doctoral cap' with streamlined design that is easy to open. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for toothpaste, cleanser, etc.

This product featuring a pearl white flip-top cap communicates a noble feel and is ideal for customers favoring minimalism design. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for hand creams, sun screen, various facial cleansers products, etc.

This translucent rounded-edge cap gives a cheerful look to the product. It is ideal for small indie brands or special collections. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for various types of cleansing, body lotions, massage creams etc.

This product stands out with its large-sized cap, high quality feeling, and special oval design. It meets the different needs of customers looking for high-capacity products. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for cleansing, lotion, scrub, hair mask, shampoo, etc.

The cap provides a smooth, but reassuring closing gesture. It is well suited for cleansing, lotion, hand cream, and sunblock markets. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes.

Oval shape gives the cap a better sense of touch. Flip-top design allows easy opening and closing of the capsule, giving customers a pleasant and comfortable experience. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for cleansing, hand cream, sunblock, isolation cream etc.

The delicate design of the product conveys a refreshing feel and a strong sense of youth. It is ideal for wash care, hand cream, and samples products. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for cleansing, hand cream, etc.

This rounded-edge flip top cap features streamlined design and a smooth sense of touch, which is well received by our major customers. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly uses for body lotion, massage cream, various facial cleansers, etc.

This white flip-top cap looks adorable and goes well with hand cream and facial cleanser products. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for cleansing, hand cream, isolation cream etc.

This product, featuring purplish red laminated tube and silver plating diamond shape cap, provides an extraordinary temperament and goes very well with luxury brands. Laminate tubes are recommended. Mainly used for top-grade face cream, essene, foundation, primer etc.

This product will stand out on the shelves in the eyes of the consumer thanks to its shiny black basse and golden belt at the waist. The double-layer cap allows more color options and gives your brand a premium edge. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for top-grade cleanser, face cream, body scrub, hand cream etc.

This product combines high reflection silver laminated tube with dual-wall silver platnig screw cap. The cap is comprised of a transparent PMMA outer layer and silver-plating inner layer, adding an elegant and graceful feel to the product. Ideal for laminated tube. Mainly used for top-grade cleanser, face cream, body scrub, hand cream etc.

The Star HM range are bag sealers designed for lighter gauges of materials. The impulse sealers are capable of sealing up to 250 µm (1000g). There is also a constant heat machine for laminates and complex materials. Both hand and foot operated machines are finished in painted mild steel. A stainless steel food shop counter top bag sealer and tube sealer are also available. The robust construction allows for years of service with a full spares and service back up. Removable sealing bars allow for ease of maintenance and replacement of consumable items.

StaMixCo manufacturers all three commercially proven static mixer designs used for high viscous melt flow mixing of polymers in extrusion service. As with most process equipment, each static mixer design has specific advantages and disadvantages that make it more or less suitable for a specific application and installation. Each type of motionless mixer is discussed below: Process Improvements: Temperature gradients are virtually eliminated. Viscosity gradients are virtually eliminated. Composition gradients of colorant, chemical additives, fillers and regrind are virtually eliminated. Stagnant polymer wall-creep material is incorporated into the bulk polymer stream. Extrusion Applications Static Mixers are used in most extrusion applications including the following: Sheet Blown Film Foam sheet Profile extrusion Co-extrusion Pipe Extrusion Blow Molding Rod & Tubing Wire & Cable Coatings Fiber extrusion & monofilaments Benefits Reduction of color additives with comparable extrudate color density. Even thickness across the entire extrudate width. Streak-free product. Improved quality when using regrind material. Foam cell size and cell distribution uniformity. Improved surface quality Improved mechanical characteristics. Rapid color change-over SMB-R Static Mixer SMB-GXS Static Mixer Mixing of blue and white epoxy resin with the SMB-GXS Static Melt Blender. It improves the melt homogeneity by factor 5-6. SMB-R Static Mixer The SMB-R static mixer for extrusion service (licensee of Bayer AG, Leverkusen, Germany) contains eight (8) very efficient motionless mixing elements that homogenize the polymer melt as it enters the extruder die. The SMB-R mixing elements are considered as high performance design where they create a very high degree of mixing in a short length. The SMB-R mixing elements are virtually indestructible due to their monolithic cast construction where the mixing bars are jointed to each other and to the ring wall via a single molten metal pour. Mixing of blue and white epoxy resins. Empty tube (top)provides no mixing. Eight (8) mixing elements (bottom) provide an excellent mix quality in a short length. SMB-GX Static Mixer Melt Blender The SMB-GX motionless mixer is a design that has been used in melt flow mixing extrusion service for over 25 years. The SMB-GX mixing elements are considered as high performance design where they create homogeneous mix in a short length. It has the same fundamental X-Grid crossing-bar structure as the StaMixCo SMB-R static mixer (Figure #8), but without the support ring around the mixing blade structure which gives the SMB-R its remarkable strength. Since the SMB-GX is manufactured from metal plates that are welded together, virtually any custom static mixer plate thickness, material and diameter can be fabricated to meet process and installation requirements. SMB-H Static Mixer Melt Blender The SMB-H Helical static mixer design pioneered the static mixing industry and has been used as a viscous static mixer on extruders for over 37 years. The Helical design is considered a low mixing performance-long length-low pressure drop motionless mixer as compared to the later developments of high performance static mixers such as the SMB-R and SMB-GX which have become the technology standards in the industry. StaMixCo manufactures SMB-H static mixers by advanced proprietary manufacturing technique where the entire unit is machined from a solid rod of bar stock material without welding. This machining process allows for custom static mixer fabrication in virtually any L/D twist, in very small sizes, with very high strength, straight and true dimensioning and with a RMS 12 mirror polish surface finish which is a much improved surface finish as compared to the traditional 32 RMS finish for the twisted and welded design.

Our standard round-top temporary fence panel. Round-Top temporary fencing panels also get their name from the shape of the frame. Round-Top panels use only two tubes to create the frame as opposed to four, with the tubes being bent to create the distinctive ’round-top’. This improves the robustness of the frame as welded joins are a natural weak point.