Results for
Germany
Wrapped composite dry sliding bearing Tin-plated steel DIN 1494 / ISO 3547 Maintentance-free Suited for oil lubrication
Request for a quoteGermany
Wrapped composite sliding bearing Tin-plated steel / aluminium alloy DIN 1494 / ISO 3547 Heavy maintenance Available on request
Request for a quoteGermany
Wrapped composite sliding bearing Tin-plated steel / PEEK (Carbon + PTFE) DIN 1494 / ISO 3547 Low-maintenance
Request for a quoteGermany
Wrapped composite sliding bearing Copper-plated or tin-plated steel / bronze DIN 1494 / ISO 3547 Low-maintenance With lubrication pockets
Request for a quoteChina
4in1 Piercing connector for model number IPC4116120: IP67 waterproof; UV-resistant; Anti-corrosive; Low voltage; Constant torque nut; Copper tin plated conductor; Inner waterproof silica gel.
Request for a quoteGermany
Wrapped composite sliding bearing Tin-plated steel / acetal resin (POM) DIN 1494 / ISO 3547 Low-maintenance With lubrication pockets Flanged sliding bearings on request
Request for a quoteGermany
Dimensions Wire diameter: from 0,2 mm Spring geometry after consultation Material Stainless steel Copper alloy Customized solutions Coating Additional coatings through external services (e. g. gold-plated, silver-plated, tin-plated) Specialities Highest precision because of laser-welded spring ends Optimal contact properties because of inclined coils Automated manufacturing Customer specific packaging Rapid prototyping
Request for a quoteChina
Insulation material: PPE/PA Safety degree: II Rated current:35A Flame class: UL94-V0 Rated voltage:1500VDC Ambient temperature range:-40-+85(IEC) Test voltage:8kV(50Hz,1min) Suitable cable cross sections:2.5-6mm2/14-10AWG Contact resistance: less than 0.25mohm Connecting system: Crimp connection Contact material: Copper, Tin plated Nut cap locking force:0.8-1.0Nm Degree of protection:IP68(1m,1H) Upper limiting temperature:110(IEC) Overvoltage category/Pollution degree:CATIII/2
Request for a quoteChina
All stamping terminals and pins Hai Tong manufacture are customized and all rights will be reserved and non-disclosed to third party without written agreement from customer, this phosphorous bronze terminal is needed 6 million per year. Designed for application in automotive, we stamped this terminal from phosphorous bronze coil that was 0.5mm thick and apply tin plating as a finish and bulk packed for delivery. Our tolerances were maintained at ±0.02mm throughout the processes and we worked with the inventory to keep a schedule for just-in-time delivery, our production is 120000pcs daily with progressive die stamping, very cheap production cost to keep us competitive in the market and long term business relationship with customers.
Request for a quoteChina
Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,Imin) Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm
Request for a quoteChina
1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min) Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm
Request for a quoteChina
1000VDC PV4.0 Diode Connector Product Description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min) Typical contact resistance: ≤0.25 mΩ Contact material: Copper, Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm
Request for a quoteChina
1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min) Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm
Request for a quoteChina
1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min) Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm
Request for a quoteChina
Metal stamping pin, contact, terminal are widely used on electronics like socket, switch, plug, battery, PCB, car antenna, car charger, material usually is copper, beryllium; copper, phosphor bronze with super electrical conductivity, and they can be silver, gold, tin, nickel plated with 4-10 micron thickness.
Request for a quoteChina
PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)
Request for a quoteChina
PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
China
Solar branch connector 1500VDC 2 in 1 /2 to 1 Product description: Insulation materialPPE Rated current35A Rated voltage1500VDC Test voltage8kV Contact resistance≤0.25 mΩ Contact materialCopper,Tin plated Degree of protectionIP68(1m,1H) Rated Impulse voltage 16kV Installation typeOutdoor,UV resistant(F1) Safety degreeII Ambient temperature range-40℃…+85℃(IEC) Suitable cable cross sections2.5~6mm2 /14~8AWG Upper limiting temperature110℃(IEC) Flame classUL94-V0 Overvoltage category/Pollution degreeCATIII/2
Request for a quoteChina
PV4.0 2 to 1 Solar Branch Inline Fuse Connector Insulation material: PPE/PA Rated current(Without fuse): Max. Input:30A / Max. Output:60A Rated voltage: 1500VDC Test voltage: 8kV Typical contact resistance: ≤0.25mΩ Rated Impulse voltage: 16kV Contact material: Copper, Tin plated Degree of protection: IP68 Safety degree: II Overvoltage category/Pollution degree: CATIII/2 Flame class: UL94-V0 Ambient temperature range: -40℃…+85℃(IEC) Suitable cable cross sections: 4-10sqmm Upper limiting temperature: 110℃(IEC) Fuse specifications: 1A-50A Regulatory approval: TUV/CE(EN60269/EN62208)
Request for a quoteSlovenia
We have developed strong and reliable supply chain for applying additional part treatment beside machining. We can offer any kind of plating, heat treatment or grinding. Some of most common type of galvanic surface protection: Zinc plating in barrels and on racks zinc-nickel alloy in barrels phosphating in zinc phosphate nickel plating in barrels tinning in barrels copper plating in barrels chemical polishing and passivation of copper and copper alloys recrystallization annealing and tempering. Heat treatment: Hardening and tempering nitriding and nitrocarbunizing carburizing and carbonitriding annealing and other treatment.
Request for a quoteGermany
In our new production space, we have at our disposal 30 state-of-the-art automated punching & bending machines. In addition to bent wire parts, we also produce bent strip parts here. Production to order with complex forming: Bent strip parts are produced from a broad range of materials, including for instance stainless steel, alloyed or carbon steel, brass, copper, bronze, or even K55 or K75, a specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.
Request for a quoteChina
Copper stamping contacts, terminal with supper good conductivity can be used on socket, plug, switch. We manufacture them with progressive die stamping with large volume, the material can be brass, phosphor brass, copper, BeCu with tin, silver, nickel plating.
Request for a quoteGermany
For conductor cross-sections from 1.5 – 16 mm² (AWG 16 – 6). Material: tin-plated copper.
Request for a quoteGermany
For conductor cross-sections from 2.08 – 10 mm² (AWG 14 – 8). Material: tin-plated copper.
Request for a quoteGermany
For conductor cross-sections from 0.34 – 1.5 mm² (AWG 22 – 16). Material: tin-plated copper
Request for a quoteGermany
For conductor cross-sections from 0.34 – 1.5 mm² (AWG 22 – 16) and 35 mm². Material: tin-plated copper.
Request for a quoteGermany
For conductor cross-sections from 0.14 up to 240 mm² (AWG 26 – 500 kcmil). Material: tin-plated copper. Tolerances according to DIN 46228 part 1
Request for a quoteGermany
For conductor cross-sections from 0.5 up to 2.5 mm² (AWG 20 – 14). Material: tin-plated copper. Tolerances according to DIN 46228 part 4
Request for a quoteGermany
For conductor cross-sections from 0.34 up to 2.5 mm² (AWG 22 – 14). Material: tin-plated copper. Tolerances according to DIN 46228 part 4
Request for a quoteResults for
Tin plate - Import exportNumber of results
91 ProductsCountries
Category