Tightening wrenches - Import export

Colour Marking Preset Torque Wrench for Cap Screw Tightening. A mark is made on the tightened cap screw and an adjacent location on your work. This lets you check for subsequent loosening. A marking torque wrench for tightening cap screws, which prevents human tightening errors. Upon reaching the set torque the marker is designed to stamp on the bolt and work. Because the stamped mark is put on the side of the bolt and the work piece, it can not only prevent missed tightening but also detect loosening of bolts. The marker is designed to stamp only when the torque wrench operates upon reaching the set torque. Marking stays on by use of quick dry ink. One refill of ink is capable of approximately 3,000 times of stamping. Marker is ink cartridge type. Only hand force required for tightening a bolt and marking the bolt simultaneously. Applicable for international use including the EU region. Compliant with ISO 6789 Type II Class B calibration procedures. [...]

Ideal for tightening verification assembly processes. Pokayoke (error-proofing) marking torque wrench. Lets you make direct visual checks for bolt tightening errors. When the adjusted torque value is reached and the wrench clicks, the bolt head is marked. So tightening and marking is done in a single operation. Marking is not done until set torque is achieved. Marking stays on by use of quick dry ink. Ink cartridges can easily be installed in the special socket wrench. One cartridge filling is sufficient for appr 3000-5000 stamping processes. Height of the stamp is adjustable (±5 mm). Setting torque can be operated by an attached hex key to avoid torque change by human mistake. The set torque is visible via a small scale window in the handle. The torque adjustment hex key is a standard accessory. Version MPQL: Pre-Lock type with scale; allows adjustments of the tightening torque on the tool. The set torque is visible via a small scale window in the handle.

Error-proofing (PokaYoke) torque screwdriver with limit switch output to eliminate missed tightening. Ideal for assembly processes with torque monitoring. After reaching the set torque, the limit switch transmits a trigger signal. This can be picked up by means of a PLC, for example. At the same time, the slip clutch is activated, making over-torque impossible. Series RTDLS are adjustable models. Along the micrometer scale, the desired torque can be easily and quickly adjusted. A locking mechanism prevents unintentional torque adjustment during use. Series RNTDLS are fixed models without scale and are particularly suitable for repetitive tightening operations at the same torque. An additional auxiliary tool (sold separately) is available for each of the 500 cNm models for easier power transmission. For counting tightening operations, the LS screwdriver can be connected to an optional 'CNA-4mk3', for example. [...]

Hardwired Tool Use Control. The hardwired preset clicker-type torque wrenches are based on Sturtevant Richmont's legendary LTC/LTCR/LTCS lines of preset torque wrenches. These tool add a tool use control to the accurate, repeatable and durable LTC group of tools by measuring time in the “clicked” position. This reduces operator technique variation through immediate reporting and reinforcement of correct use technique. These tools are ideal for those who wish in inexpensive and highly effective control and who have the PLC and knowledge resources to implement the communication and feedback system. The tool's light weight and cushion grip provide excellent ergonomics and reduce the onset and level of operator fatigue. The ball bearing rockover mechanism enhances the accuracy, repeatability, and durability high-throughput assembly operations require! The torque can be set using any unit of torque measurement: Imperial, S.I., or metric. [...]

The TCI Multi allows the user to connect up to five Wrenches to be used in assembly production, allowing for complete control of your torque tools and peace of mind for safe recording and logging of vital data. The WrenchStar Multi can be connected to the TCI Multi at the push of a button. The TCI Multi allows easy management, set up and diagnostics of itself via Web Browsers. The TCI Multi can be used stand alone and jobs can be selected and results sent to a PC or Web Page. The TCI Multi accepts Open Protocol commands via Ethernet to select a Job to use with the WrenchStar Multi. The TCI Multi has Web Status Page that allows Ethernet properties, RF properties, logging of messages, and Wrench status to be monitored. Web Page mirrors last Torque and Angle reading from Wrench plus its Torque status (LO, OK and HI). LED lights show real time status of the Wrench connection on the unit. Connection to Crane rotary torque transducers is also possible using the RFm wireless device.

The WrenchStar Multi digitally records torque & angle data and connects either wirelessly or with a cable option, to our IQVu data collector. The WrenchStar Multi has a 360° Light Ring that is completely visible at any angle. The torque wrench can be used wirelessly or with a cable option. It has a small OLED display that is clear and bright and shows how many Jobs are left. There is also a strong vibration alert when reaching the desired torque level. The Wrench will connect wirelessly using RF to the IQVu. If the Wrench goes out of range then it will continue to take readings, which once you are back in range it will automatically connect to the IQVu and send the data. The WrenchStar Multi can store around 200 readings within its internal storage so you can continue to work offline before having to return to the IQvu to send your Jobs. The quick change battery allows less downtime in production.

Error proofing for SLTC-FM preset click wrenches. The Torque Control Verifier (TCV) is ideal when the application calls for accuracy, repeatability and simplicity of the 2.4 GHz Wireless Preset Clicker-Type Torque Wrench, and only a single tool at the station needs to be controlled. The TCV-FM provides verification to the operator on the quality of each use, plus DC 24V relays and I/O port for line controller communications (PLC). The TCV-FM was created for those who desire to integrate their manual torque wrenches into their control line automation, without necessarily needing all of the features of the PTV-FM. The TCV performs the comparison and communication functions required for basic control, but without the stand-alone capabilities of the PTV.

Torque Control Verifier with Ethernet. The TCV was one of the first torque controllers to hit the market. That was back in 1999. Paired with an SLTC FM-2.4 GHz preset click wrench, the TCV quickly found a spot in automotive plants around the world. In 2017 we updated the TCV to pair with two-click wrenches for simultaneous operation. Enter the TCV e2! The wireless error-proofing world is rocked again. The TCV e2 can be either network or I/O-driven. It is perfect for indexing lines. The TCV e2 can be used with the legendary SLTC FM 2.4 GHz preset click wrench and/or the all-new TAC digital torque and angle click wrench. The TVC e2 manages up to 10 parameters and can be paired with up to a total of 10 tools. Tools are paired with parameters. Operators work independently. Like the Global 400, the TCV e2 has complete date/time stamped reporting. The display on the TCV e2 and the LED on the wrench provide an OK/NOK visual guidance for the operator. [...]

Wireless Error Proofing System. The Global 400 performs as a station dedicated process controller that organizes, directs workers, tools, and tasks. It also brings a powerful networking capability not previously available in the Global 8 and the Global 100 series. Mixed Model Manufacturing Mandates Flexibility Sturtevant Richmont specializes in solving the most complex assembly challenges. The Global 400 is designed to organize work stations where highly customized products are assembled. It can work with 16 primary torque tools, 8 holding tools, and an additional 8 I/O tools. It has the capacity for 100 sets of parameters that can be grouped allowing 4 operators to work as a team. These parameters or groups can be formed into jobs containing a fixed build sequence of put to 35 steps. Mixed Model Manufacturing Mandates Communication The Global 400 communicates with the operators, the tools, and your network in multiple ways. [...]

Error Proofing Takes a Giant Leap Forward The Exacta Series of Radio Equipped Digital Torque Wrenches is the final piece in connecting all the torque application and data about every hand tool tightened fastener in your assembly. We have different Exacta digital wrenches to work with the Global Series of Process Monitors/Controllers. Learn more about how these nearly indestructible yet sophisticated torque application measuring tools can add value to your assemblies. The 1200 Series Exacta 2 Digital Torque Wrench has earned the reputation of being the hardest working, most accurate, reliable and durable digital wrench on the market. That reputation is built on much more than the ± 1% Indicated Value accuracy. The 1200 Series Exacta 2 pairs with the Global 400 and Global 400mp only. It does not communicate or pair with the Global 8. Note: The 1200 Series Exacta 2 Digital Torque Wrench is engineered to work with the radio in function mode. It will not perform without the radio...

When the set torque is reached, the rotary slip clutch is activated. At the same time, a signal that it has been fully tightened is transmitted by radio. The LED "feedback" system lights up in the handle blue for OK, red for NG. An R-CM receiver (successor to the R-FH256) can recognise the IDs of up to four torque tools. However, simultaneous transmissions are not supported. By using it, a "Poka Yoke" error prevention system can be easily implemented. Using the optional SB-FH2 setting box and setting software, communication settings for R-CM can be easily executed (wireless). The R-CM receiver can control the number of tightening operations of a torque spanner or torque screwdriver. The RTDFH / RNTDFH wireless screwdrivers comply with the telecommunication standards in Japan, the USA, Malaysia, Thailand, Taiwan, Mexico, Vietnam, China, the EU, South Korea, Russia and India (information status June 2021).

2.4 GHz Preset Clicker-Type Torque Wrenches Sturtevant Richmont 2.4 GHz Preset Clicker-Type Torque Wrenches incorporate the accuracy, repeatability and durability of our preset torque wrench lines that have made them a staple of assembly lines in many industries. The addition of the radio adds rapid operator and controller communication capability so they can be readily incorporated into your error-proofing approach. Uses the legendary SR LTC-Series Preset Interchangeable Head Torque Wrench as it's mechanical base, so you get the same incredible repeatability and durability we provide all our assembly customers. The tool's light weight and smooth vinyl grip provide excellent ergonomics and reduce the onset and level of operator fatigue. The SR Dovetail provides exceptional strength and rigidity, and accepts any of our over 140 Interchangeable Heads. Those tools featuring ratchets use the SR Slide Pin Ratchet, with it's legendary strength and maintenance simplicity.

Tohnichi's AMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in, ozf·in).

The all-new TAC (Torque & Angle Control) is really two wrenches in one. First, and foremost, it is a traditional mechanical click-wrench. When the preset torque value is achieved, the internal mechanism moves, striking the side of the flattened case. That creates a distinctive sound. The operator stops pulling when the wrench clicked, the LED flashes green, and the display on the Global 400 advances the batch count and flashes green. Note that there are two torque values shown on the Global 400 display. There is the "click" torque value, the point at which the wrench clicked. There is also the peak value. This is the point at which the operator stopped pulling. The display to the right also shows that the appropriate torque value was achieved 22 degrees of rotation after snug torque was achieved. Compatible Controllers: - Global 400 - Global 400mp - TCV-e2

Digital Torque & Angle Wrench Sturtevant Richmont has long been known for torque wrenches that can stand up to the rigors of the industrial world. Part of that legendary durability comes from size. The DTC is our newest digital torque and angle wrench. This is a great audit or assembly tool, with built-in innovation. We've taken the transducer from the Exacta 2 Series wrench and placed in the body of our CCM wrench. It is now half the weight of an Exacta Series wrench and the slimmer profile gives you access to points that may have been difficult to reach with an Exacta. We packed in some great features like torque and angle modes of operation. The result is a tool is like no other. Agile. Slim. Lightweight. The DTC has a b/w display and colored light bands on the side of the wrench. Those bands change yellow to green when the target values are achieved. An auditory beep and the handle vibrates provide two additional modes of operator focused error proofing guidance.

Documented Error-Proof Torque Control for Assembly Operations Sturtevant Richmont's Exacta 2 line sets a new standard for digital torque wrench performance in assembly, maintenance, and auditing. Better still, this new design as robust as it is accurate and reliable. The three modes of operation onboard permit use in almost every circumstance and most models offer the SR dovetail so you can use any of 200 SR Interchangeable Heads. Since it has a serial port and works with our Exawin software, specification and data handling are quick and easy. Exacta 2 comes with a serial cable for communication with a PC, and can download readings as they are taken, or in a batch mode! The readings can be saved as a text file and imported by almost any statistical or spreadsheet software. This is an invaluable aid when performing process design and process analysis!

Dial Indicating Torque Wrenches Basic direct reading torque wrench. Wide range, high accuracy, lightweight, easy-to-read large scale, suitable for inspection. DBE-S series have a convenient memory pointer giving peak readings. Since the dial can be rotated, the pointer can be set to the desired torque first, and complete tightening is achieved when the pointer indicates "0". The dial indicator has a full-surround protective cover to prevent damage to external objects (except DB420N, and DBE series). DBE accuracy is consistent regardless of where the hand is placed. Key Features: - Oversized dial face is extremely easy to read. - Accuracy and calibration procedures compliant to ISO 6789 type I class B. - Bi-directional. - Fixed male square drive. - DBE has an extension handle. Options: - Alternatively available in english units (lbf·in, ozf·in). - Models with metric scale (gf·m, kgf·m) on request. - Optionally without memory pointer.

Industrial Dial Torque Wrenches High-precision assembly operations, fastener testing (in-process/final/receiving) operations where prevailing-torque nuts are used, and auditing of fastener or assembly torque are all places where the new IDW Series will make a difference. The neoprene rubber grip that comes on tools up to 250 lbf·ft/350 N·m capacity supports proper grip and provides comfort during use. A specially-designed extension handle is included on tools of 600 lbf·ft/800 N·m and greater capacity. This provides both greater ergonomic advantage through longer lever length and a short disassembled length for easy storage and transport. Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error. Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification. Heavy duty dial guard protects against breakage.

Flat and Tapered Beam Torque Wrenches The error proofing industry started with a deflecting beam wrench built and sold by Paul A. Sturtevant. That was 1924. Highly accurate, very easy to use, and so durable they often last for decades - and decades! The special alloy steel beam is ground to a rate of deflection with the use of dead weights, rather than a dimensional tolerance. This process is time consuming and very labor intensive, but the result is a tool that remains accurate as long as the beam is intact and the pointer is on zero under no-load condition. The flat shape of the beam insures the wrench remains at a right angle to the fastener, reducing or eliminating side-loading error. This unique taper-grinding distributes stress evenly along the entire length of the beam, extending tool life indefinitely. With a minimum of moving parts, these tools are virtually repair and maintenance free.

Handle Extension Tube The Handle Tube Extension changes the length of SR preset and adjustable torque wrenches of 600 lbf·ft (≈800 Nm) capacity tools. It provides serious ergonomic advantage for higher torque application. Works with 600 ft·lbf capacity SR adjustable and preset torque wrenches to reduce the effort required to achieve high torques. Installs and locks in place. Create a longer torque wrench by extending the lever length to reduce effort to attain selected torque. Compatible Tools: 810597, 810598, 810600, 810601, 810151, 810153, 810319, 810859, 810860 CAUTIONS: If this Handle Extension is to be used, the tool MUST be calibrated and/or preset with the Handle Extension installed. Failure to do so will result in inaccurate torque. Once the Handle Extension is installed, always apply force at the knurled portion of the Handle Extension when in use. Do not apply force in other locations along the Handle Extension during use, as this may result in inaccurate torque.

Handle Extension for Preset Torque Wrenches This customizable extension was designed in response to your requests for longer tools. It gives you the ability to add up to 7” of length to your tool, with the actual length chosen by you to meet your needs. This handle extension is actually a two-piece kit consisting of: 1.) A threaded adapter that attaches to the back of your SR preset torque wrenches using the existing buttress threads. This adapter is designed to work with all SR preset torque wrenches of 3000 inch pounds capacity and below. 2.) A 7.5” long solid handle extension that can be cut down to as little as 0.5” long. 3.) A new SR Comfort Grip to slide over the handle extension after yo have customized it. Note: Changing the grip length changes the torque output; check and set the torque after installing the extension. Ordering Information: - R853601 = Handle Extension Preset

Needed to adjust SR Preset Torque Wrenches. The Combination Adjusting and Release Tool is essential to setting the torque on all SR torque wrenches using presetting. It fits and engages both the torque adjusting nut and the torque adjusting nut locknut, and does so either simultaneously or individually, as needed. The CART consists of a grip that controls a small hex key with a larger hex key surrounding the point of the smaller one. The smaller hex key fits the torque adjustment nut and the larger key fits the lock nut that holds the torque adjustment nut in place. Used together, the two keys in the CART make it easy to unlock the torque adjustment nut, make the needed adjustment, then lock the new torque setting in place. Ordering Information: R819117 = Combination Adjusting and Release Tool (CART)

Intended for low and high voltage applications where torque is critical, Mountz insulated torque wrenches protect their operators in both low and high voltage situations. Essential for worker safety, insulated torque wrenches also improve work quality and productivity by preventing product damage due to arcing or shorting. Applications for linemen and electricians include a wide variety of live electrical situations, such as uninterrupted power supply repair. Mountz insulated torque wrenches meet IEC 60900 standards, keeping your workers safe. Features Withstands voltage upto AC 1000V (IEC 60900). Ratchet head. Vinyl heat shrink insulation. Ideal for electric car assembly, connection of battery terminal, and wiring work. Torque setting is easy to adjust by knob and scale. Meets or exceeds ISO 6789:2017 (accuracy ± 4% of indicated setting). [...]

Preset Clicker Torque Wrench with "DIN style" rectangle insert The strong dimensioned torque spring is the very heart of this clicker wrench. With reaching the pre-set torque, the torque spring is squeezed slightly, and the hardwearing pawl is releasing the tool tang. An excellent tactile and audible impulse signals that the pre-set torque is achieved. The torque is preset and locked in with a special tool, and tamper-resistant/tamper-evident seals can be installed. Torque can be set using any torque tester or calibration device providing ± 1% accuracy or better. Key Features: - Accuracy ± 4% i.v. (within 20-100% of capacity) - Meets or exceeds ASME B107.300-2010 and EN ISO 6789 - Rectangle connector (DIN) 9×12 mm rsp. 14×18 mm - Thick-walled housing profile provides high durability - Torque adjustment via optional C.A.R.T. (p/n 819117) - Oil and chemicals resisting vinyl handle for optimal hand position. - Can be ordered preset from factory.

Preset Clicker Type Torque Wrench with Reversible Ratchet Head The strong dimensioned torque spring is the very heart of this clicker wrench. With reaching the pre-set torque, the torque spring is squeezed slightly, and the hardwearing pawl is releasing the tool tang. An excellent tactile and audible impulse signals that the pre-set torque is achieved. The torque is preset and locked in with a special tool, and tamper-resistant/tamper-evident seals can be installed. Torque can be set using any torque measurement/calibration device providing ± 1% accuracy or better. Key Features: - Accuracy ± 4% i.v. (within 20-100% of capacity) - Meets or exceeds ASME B107.300-2010 and EN ISO 6789 - Exeptional wear-resistant reversible square drive ratchet - Thick-walled housing profile provides high long-term stability - Torque adjustment via optional C.A.R.T. (p/n 819117) - Comfortable cushion grip plus light weight - Can be ordered preset from factory.

Preset Clicker Type Torque Wrench with Fixed Square Drive The strong dimensioned torque spring is the very heart of this clicker wrench. With reaching the pre-set torque, the torque spring is squeezed slightly, and the hardwearing pawl is releasing the tool tang. An excellent tactile and audible impulse signals that the pre-set torque is achieved. The torque is preset and locked in with a special tool, and tamper-resistant/tamper-evident seals can be installed. Torque can be set using any torque measurement/calibration device providing ± 1% accuracy or better. See our „Torque Measurement“ products. Key Features: - Accuracy ± 4% i.v. (within 20-100% of capacity) - Meets or exceeds ASME B107.300-2010 and EN ISO 6789 - Exeptional wear-resistant fixed square drive - Thick-walled housing profile provides high long-term stability - Torque adjustment via optional C.A.R.T. (p/n 819117) - Comfortable cushion grip plus light weight - Can be ordered preset from factory.

Preset Clicker Type Torque Wrench with Dovetail Tang The strong dimensioned torque spring is the very heart of this clicker wrench. With reaching the pre-set torque, the torque spring is squeezed slightly, and the hardwearing pawl is releasing the tool tang. An excellent tactile and audible impulse signals that the pre-set torque is achieved. The torque is preset and locked in with a special tool, and tamper-resistant/tamper-evident seals can be installed. Torque can be set using any torque measurement/calibration device providing ± 1% accuracy or better. See our „Torque Measurement“ products. Key Features: - Accuracy ± 4% i.v. (within 20-100% of capacity) - Meets or exceeds ASME B107.300-2010 and EN ISO 6789 - SR dovetail connector with outstanding rigidity and wear resistance - Thick-walled housing profile provides high long-term stability - Torque adjustment via optional C.A.R.T.

Adjustable Torque Wrench with Reversible Ratchet Basic click type torque wrench for various tightening applications. Its 24 teeth ratchet with 15 degree operating range allows usage in space-limited working conditions. A clear "click" sound by internal toggle mechanism signals tightening completion upon reaching the set torque. Torque setting is easy to adjust by knob and scale. The lock-structure has been newly-developed. It assures operation in secure, and set-torque remains solidly. The ergonomic resin handle not only covers the large and easy to read scale but it also reduces operators fatigue. Via optional color caps differently set wrenches can be identified at a glance. Key Features: - Accuracy and calibration procedures compliant to ISO 6789 type II class A - Reversible Ratchet with 24 teeth and 15° operating range - Improved adjusting and lock mechanism - New designed ergonomic resin handle - Large-size memory scale - Traceable calibration cert (JCSS) incl.

Ratcheting Square Drive Torque Wrench SR: "Customers tell us they love these wrenches because they are accurate, reliable, and durable. In designing the new handle we kept all the things that our customers love and added the Knurl Grip aluminum handle. Strong, lightweight, rugged, ergonomic, this handle truly lets you get a grip on torque." In sync with the Sturtevant Richmont approach to customers you can buy just a retrofit kit and replace the handle yourself or you can buy new wrenches with the new handle already in place. Either way the best accuracy, reliability, and durability is within your grasp. A simple thumbscrew mechanism locks handle to avoid unintended changing of torque setting. The strong dimensioned torque spring is the very heart of this clicker wrench. With reaching the pre-set torque, the torque spring is squeezed slightly, and the hardwearing pawl is releasing the tool tang. An excellent tactile and audible impulse signals that the pre-set torque is achieved.