Results for
CRB CUSCINETTI VOLVENTI
Italy
Thrust ball bearings are separable axial bearings. Features of thrust ball bearings: ideal for reduced and medium speeds they bear relatively high axial loads separable and easy to assemble Single direction thrust ball bearings can accomodate axial loads in one direction and thus locate a shaft axially in one direction. Double direction thrust ball bearings can accomodate axial loads acting in both directions and thus serve to axially locate a shaft in both directions. These bearings, in both versions, have been designed to withstand only axial loads and must not be subjected to radial loads of any kind. Series: 51100, 51200, 51300, 51400 APPLICATIONS: Earthmoving machinery Agricultural machinery Pumps Cleaning Equipment / Industrial cleaning machines Bottling / Filling carousels Electric motors Fitness machines Metalworking machines Glass, marble and woodworking machines Automatic opening systems Oil Industry Oil and Gas rotary tables Vertical shafts
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Thrust Bearings consist of precisely machined cages and rollers. They have high rigidity and high load capacity and can be used in small spaces. Thrust Needle Roller Bearings use needle rollers, while Thrust Roller Bearings use cylindrical rollers. Various types of raceway rings are available, and can be selected according to the operating conditions. When the bearing mounting surface of a machine is heattreated and finished by grinding, Thrust Bearings can be used without raceway rings, making the machine more compact. They are best suited for applications where high accuracy is required at high speeds and under fluctuating heavy loads, such as the drive mechanisms for automobiles, machine tools, and highpressure pumps.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
In this series, the caged cylindrical rollers, AZK, and the complete bearings, AZ, in which AZK are combined with an inner ring (WS) and an outer ring (GS) are available. The cage has a special precise structure which is highly rigid. The cylindrical rollers are outwardly arranged and guided by the cage with exact precision to enable them to withstand heavy loads, even at high rotation speeds.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
These bearings consist of a cage made from a steel plate, which is precisely press formed and surfacehardened, and needle rollers with a diameter variation within 2μm. They have a rigid structure and a high lubricantretaining capacity. As they have the lowest sectional height compared with other thrust bearings, they can be used instead of conventional thrust washers and can withstand highspeed rotations with a low coefficient of friction.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO Combined Type Needle Roller Bearings are combinations of a radial bearing and a thrust bearing. Caged Needle Roller Bearings are used as radial bearings and thrust ball bearings or thrust roller bearings are used as thrust bearings. They are compact and very economical, and can be subjected to radial loads and axial loads simultaneously. They are widely used for machine tools, textile machinery, and industrial machinery.
Request for a quoteKIS ANTRIEBSTECHNIK GMBH & CO. KG
Germany
KIS deep groove ball bearings are characterised by their high load carrying capacity and speed stability. Depending on the requirements of your application, they are available in different variants and in both radial and axial design. Our single row deep groove ball bearings are available in open and sealed designs. Open bearings are maintenance-free, while sealed bearings offer better corrosion protection. Single row deep groove ball bearings can support both radial and axial forces. Our double row deep groove ball bearings feature a higher radial load carrying capacity. They are used when the radial load carrying capacity of single row deep groove ball bearings is not sufficient. Axial deep groove ball bearings are suitable for supporting particularly high axial loads. They are available in both single and double direction. Single direction thrust ball bearings can only support axial forces, while double direction thrust ball bearings can support both radial and axial forces.
Request for a quoteKFB CLARFELD GERMANY GMBH
Germany
KFB-Clarfeld thrust ball bearings are manufactured as single and double direction models. Ball bearings of the series 511, 512, 513 and 514 are single sided, the models 522, 523 and 524 are double sided. Thrust ball bearings are composed of shaft washers, cage washers, and cage assemblies. The bearings are separable; cage assembly and bearing washers can therefore be fitted independently of each other. Both models tolerate high axial forces, however, they may not be radially stressed.
Request for a quoteWIB SA
Switzerland
You’re developing advanced technologies that keep your business and your industry moving. When it’s time to move beyond standard bearing to custom ball bearings solutions designed for uniquely challenging applications, WIB is a world-class partner.
Request for a quoteNIPPON THOMPSON EUROPE B.V. (IKO)
Netherlands
IKO LBalls are selfaligning Spherical Bushings consisting of a special zinc diecast alloy body and a studded ball which has its axis at right angles to the body. They can perform tilting movement, oscillating movement and rotation with low torque, and transmit power smoothly due to uniform clearance between the sliding surfaces. Their superior wear resistance assures stable accuracy for long periods of time, and maintenance is simple. They are very economical bearings. For these reasons, they are widely used in link mechanisms in automobiles, construction machinery, farm and packaging machines, etc.
Request for a quoteNORELEM FRANCE
France
Steel housing. Nitrile rubber seal. Preloaded highaccuracy bearings with a 60° thrust angle. The bearings accept both radial and axial forces from both directions. Due to their preload, the angular contact ball bearings provide a high level of stiffness, excellent concentricity, precise tool positioning and repeatability. The integrated lowfriction seal effectively keeps dirt away from the bearing, thereby ensuring excellent operating safety and a long service life. The bearing friction coefficient Mrl is a reference value. The moment of inertia corresponds to that of the rotating inner ring. The limiting speeds are applicable after grease is applied. Technical data All bearings are supplied ready for mounting with lubricating grease type KE2P35 acc. to DIN 51825. Housing and shaft tolerances correspond to roundness tolerance class IT2 and perpendicularity tolerance class IT4.
Request for a quoteNORELEM FRANCE
France
Ceramic bearings Si3N4. Bearing cage PTFE. For most applications Si3N4 is the preferred material for ceramic bearings. Silicon nitride bearings are light, very hard and highly wear resistant. High and ultrahigh performance bearings are used in e.g. aerospace technology, metal production industries (high application temperatures), machine manufacturing, chemical industries (chemically aggresive substances), pharmaceutical and medical industries, semiconductor and biotechnology (clean room enviroments which may not be contaminated by lubricants). On request Special version with PEEK ball cage. Without ball cage.
Request for a quoteNORELEM FRANCE
France
Inner ring, outer ring and rolling elements, bearing steel. Cage sheet steel. Labyrinth seal sheet steel. Lip seal NBR. Version 2Z = sealed both sides with noncontact labyrinth seals. 2RSR = sealed both sides with contact lip seals. Note Deep groove ball bearings accept high radial and axial loads. Axial loads are absorbed in both directions. The versions 2Z and 2RSR are lubricated for life with a high quality grease. The main dimensions of the deep groove ball bearings conform to DIN 6251. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. The radial internal clearance corresponds to the clearance CN acc. to DIN 6204. These tolerance classes are standard and well suited for most applications.
Request for a quoteFRANKE GMBH
Germany
Franke FDH linear guides are suitable for linear movement tasks, especially in dynamic pick-&-place applications. They have rollers with angular contact ball bearings for the highest acceleration and speed values, for example when using linear motors as the drive source. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteFRANKE GMBH
Germany
Franke FDG linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications in harsh environments and with reduced demands on load capacity. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteNORELEM FRANCE
France
Housing steel. Cage plastic. Balls steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seal. The linear ball bearings have a plastic cage which results in quiet and outstanding running properties. With flange for direct mounting on the housing. Linear ball bearings with doublesided seal should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts. Precision guide shafts 21595. Fastening screws 07160.
Request for a quoteNORELEM FRANCE
France
Housing washer, shaft washer and rolling elements, bearing steel. Cage, steel. Note Axial ball bearings accept high axial loads from one direction but may not be loaded radially. The bearings are separable. This means the bearing parts can be fitted independently of each other. The main dimensions of the axial ball bearing conform to ISO 104 and DIN 711. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. These tolerance classes are standard and are well suited for most applications.
Request for a quotePEEKCHINA CO., LTD.
China
Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SCHULZ STANZTECHNIK GMBH
Germany
Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.
Request for a quoteGMN PAUL MÜLLER INDUSTRIE GMBH & CO. KG
Germany
For many applications such as machine tools, medical devices, vacuum and measuring equipment, as well as complex bearing systems, GMN develops and offers special ball bearings which meet our customers’ specified requirements.
Request for a quoteFRANKE GMBH
Germany
Franke FDB linear guides are suitable for linear motion tasks in almost all industries. They are particularly convincing in cost-sensitive applications with reduced demands on load and noise. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.
Request for a quoteGMN PAUL MÜLLER INDUSTRIE GMBH & CO. KG
Germany
"Ball bearings with a material combination of bearing steel (inner and outer rings) and ceramic (balls) are called ‘hybrid’ ball bearings. All GMN ball bearings can be supplied as hybrid ball bearings. The material characteristics of ceramic balls in hybrid ball bearings result in significant increases in machine performance (in comparison to ball bearings using steel balls), especially under critical conditions.
Request for a quoteMPS MICRO PRECISION SYSTEMS AG
Switzerland
MPS Microsystems offers a wide range of linear bearings that provide smooth movement. Another advantage of these guidance systems: their attractive price. They are available in a range of diameters from Ø 3 mm to Ø 25 mm and are made of injected plastic segments (POM), as well as easy-to-clean stainless steel needles and balls. The needles have three roles: they hold the segments together, they serve as external tracks for the balls, and they define the diameter of the ball bushing. The plastic segments of MPS Microsystems DBL series linear bearings enable their use in environments with high temperature fluctuations.
Request for a quoteMPS MICRO PRECISION SYSTEMS AG
Switzerland
MPS Microsystems is specialized in manufacturing high-precision, miniature linear bearings. We offer a comprehensive range of exceptionally smooth bearings with bore diameters from Ø 2 mm to Ø 6 mm. The balls of these precision bearings meet ‘Grade 3’, the highest quality defined by the ISO 3290/DIN 5401 standard. Combined with a cage and a high precision casing, they allow rapid positioning while reducing friction and eliminating the stick-slip effect. The standard version of MPS Microsystems linear bearings consists of a stainless steel bushing and balls, and a brass cage. An all-stainless steel version or one with ceramic balls can be made on request.
Request for a quoteKIS ANTRIEBSTECHNIK GMBH & CO. KG
Germany
Customised system or individual part solutions are our core competence at KIS. We develop complete solutions for you based on our own KIS products and combine them with our comprehensive service for drive technology. Whether it's a careful selection of individual components or proper assembly ensuring your application functions perfectly: As bearing specialists based in Germany, we’re there for every step of the process, from development and construction, through monitoring of production and assembly, to quality inspections and practical tests.
Request for a quoteNINGBO TOWER INDUSTRY CO.,LTD
China
Deep groove ball bearings, bearing, ball bearing
Request for a quoteNINGBO TOWER INDUSTRY CO.,LTD
China
bearing,pulley,guide bearing,ball bearing
Request for a quoteTECNORULLI S.R.L. CON SOCIO UNICO
Italy
Steel rollers with jacket consisting of tube and bearing mounting head rigidly coupled by pressure. They are mounted on pre-lubricated angular or radial ball bearings protected with double-labyrinth dust seals. Clamped steel rollers are used in belt conveyors with limited or medium-heavy loads. The diagrams and tables on page 34 show the dimensional characteristics and maximum loads. Operating temperature:-10 ÷ +90 [°C].
Request for a quoteOTOBAŞAR
Turkey
Beaerings roller bearings ,axial,tapered roller bearings,cross pieces
Request for a quoteASKUBAL - ASK-KUGELLAGERFABRIK ARTUR SEYFERT GMBH
Germany
Our rod ends with ball bearings are used for: - changing loads - large swivelling movements with medium to high rotation speed respectively pivoting frequency - rotations with medium to high rotation speed respectively pivoting frequency Please see our catalogue or our website.
Request for a quoteResults for
Thrust ball bearings - Import exportNumber of results
36 Products