Thickness gauge - Import export

Designed for underwater remotely operated vehicles, offering a dedicated ROV mountable thickness gauge (depth rated to 3,000m) with live A-scan and piezo-composite probe. This gauge is versatile and designed to measure metal thickness in the harshest subsea operating conditions. KEY FEATURES: - A-scan to assist with measurement verification visually - Multiple-Echo and Echo-Echo modes for accurate measurements through coatings (up to 1 mm) as specified by Classification Societies - Single-Echo mode for heavily corroded metals with no coating - Use the Auto Single-Echo/Echo-Echo/Multiple-Echo measuring mode for best results or set manually - Supplied with CygLink software to display and process measurements on a computer at the surface - High-performance SD2C probe fitted with a Hard Rexolite Delay line - Easy calibration and measurement settings via CygLink software at the surface - P50 Probe Handler cleverly-designed to self-align with pipes from 50mm diameters to flat surfaces.

A quick thickness control of blankets, plates or underlay foils outside the printing press: This is the main function of the transportable, analog BIRKAN thickness gauge. It allows you to check in no time the thickness of your cylinder packing and prevent printing problems. The thickness gauge is equipped with a special feeler for soft materials such as rubber printing blankets. However, other materials not thicker than 5 millimetres can be equally measured.

Specifically designed for divers undertaking ultrasonic thickness measurement (UTM) of underwater structures. The Cygnus Underwater diver-held ultrasonic thickness gauge has been built to withstand harsh subsea environments while providing quick and accurate metal thickness measurements through coatings or heavy corrosion. This diver-held thickness gauge is simple to operate using 3 function keys, an intuitive menu and a large LCD display – highly visible, even in low-visibility waters.

Designed for taking reliable thickness measurements in Zone 0 Explosive Atmospheres, the Cygnus 1 Ex is certified intrinsically safe to ATEX, IECEx, UKEX for Zone 0 and NRTL for Class 1, Division 1. The Cygnus 1 Ex boasts advanced data logging, manual measurement mode, features a large colour LCD display and offers 3 measuring modes for through-coat measurements and various materials - including heavily corroded metals.

Cygnus ROV Mountable ultrasonic thickness gage is depth rated to 500m and designed to operate in the harshest operating conditions, ideally suited for asset integrity inspections and pipeline inspections using ROV. Dedicated software displays and logs thickness measurements from the ROV UTG on to a computer at the surface. The Cygnus Topside Repeater (TSR) is available as an option and has the facility to display the thickness measurements remotely and overlay them on to a video signal. This allows the measurements to be superimposed on the ROV camera’s monitor screen. Supplied with CygLink software to display and log thickness measurements from the ROV wall thickness gauge on a computer at the surface which can be saved to a file and printed out. CygLink has two data logging facilities Quick Log for simple recording of thickness measurements and Structured mode with four templates available Single Point, Multi Point, Grid Point and Key Point.

Within the thickness measurement instruments range is the Cygnus Mini ROV Mountable ut thickness gauge. This gauge is pressure tested to 500m and designed to be mounted onto small observation ROVs with or without a manipulator facility, allowing the operator to carry out thickness measurements in areas that have previously been unfeasible using large ROVs or divers. Supplied with CygLink software to display and log thickness measurements from the ROV metal thickness tester to a computer at the surface which can then be saved to a file and printed out. CygLink has two data logging facilities Quick Log for simple recording of thickness measurements and Structured mode with four templates available. The Cygnus Top Side Repeater (TSR) is available as an option and has the facility to display the thickness measurements remotely and overlay them on to a video signal. This allows the measurements to be superimposed on the ROV camera’s monitor screen.

As the top of the surface thickness measurement instruments range, the Cygnus 6+ digital thickness gauge has a bright colour LCD display AND an endmounted rotatable LCD display, and is Cygnus’ most advanced material thickness gauge. This unit offers a range of key features for the professional user, such as Ascan and Bscan displays to help verify readings while MSI™ indicates stable readings; comprehensive data logging with three available formats; enabling hasslefree reporting and analysis; manual and automatic gain control; Bluetooth connectivity; plus much more. As well as the multipleecho measuring mode for accurate and reliable measurements through coatings up to 20 mm thick, this unit also uses singleecho and echoecho modes for extreme corrosion and back wall pitting. s 6+ PRO is an excellent choice when looking for a NDT thickness gauge.

Designed for most industrial or shipping inspection applications, the Cygnus 4+ ultrasonic thickness tester offers features such as Ascan display to help verify readings; simple to use sequential data logging with hasslefree reporting and analysis; and manual & automatic gain control. As well as using the multipleecho technique for accurate and reliable measurements through coatings up to 20 mm thick, this ultrasonic thickness meter also uses singleecho and echoecho measuring modes and a verity of portable UTM probes for extreme corrosion and back wall pitting. Offering maximum strength (US MIL STD 810G) and environmental protection (IP67), this UT thickness gauge is a must for any inspector carrying out asset integrity maintenance or NDT work.

The Cygnus 2+ metal thickness gauge has an endmounted rotatable display designed for rope access work, providing a safer environment when working at height. As with all Cygnus thickness measurement instruments, the Cygnus 2+ uses the multipleecho mode for measuring through thick coatings (up to 20 mm thick in Deep Coat mode). As well as this, the Cygnus 2+ thickness gauge also incorporates the singleecho mode for measurements on uncoated surfaces with heavy front face and/or backwall corrosion, and the echoecho mode for measurements on painted metals with heavy back wall corrosion and pitting using a variety of portable UTM probes. Offering maximum strength and environmental protection, the Cygnus 2+ metal thickness tester is certified to stringent US MIL STD 810G standard and IP67.

Cygnus DIVE is a wristmountable underwater ultrasonic thickness meter that has been designed for the professional diver and can be worn on the forearm, providing an invaluable free hand whilst performing an in water survey (IWS). It has a large bright display for easy viewing from all angles, by the diver and his camera/surface crew, even in poor visibility. Cygnus DIVE also hosts an array of other key features, such as Ascan to help verify measurements; data logging that enables hasslefree reporting and analysis; MSI™ to verify stable measurements; and AutoLog for automatically logging measurements without having to press any buttons. The Cygnus DIVE uses the multipleecho technique (approved by Class Societies) for accurate, reliable thickness measurements through coatings up to 20mm thick. This unit also incorporates singleecho and echoecho modes used for extreme corrosion and pitting, making it one of the most versatile underwater thickness gauges on the market.

The Cygnus 4 General Purpose ultrasonic thickness gauge is ideal for most industrial, shipping and structural inspection applications. The unit is extremely userfriendly thanks to its simple to use keypad, intuitive menus and a colour LCD display which can be viewed in all lighting conditions. Using the trusted Cygnus multipleecho technique, the Cygnus 4 ultrasonic thickness gage is used for measuring metal thickness through paint (up to 20 mm thick) providing an ultrasonic thickness measurement that is accurate and reliable. Certified to US MIL STD 810G standard, this throughcoating ultrasonic thickness gauge offers maximum strength and environmental protection (IP67).

Being the industry standard for undertaking subsea thickness measurements for over 3 decades, the Cygnus Underwater is a trusted underwater ultrasonic thickness gauge within the marine industry worldwide and has been used for underwater inspections inlieu of drydocking (UWILD) for many years. Depth rated to 300 meters, Cygnus Underwater metal thickness tester uses the multipleecho technique (approved by Classification Societies) for accurate and reliable thickness measurements through coating up to 20mm thick, when used in Deep Coat mode (upon request). This underwater thickness gauge is simple to use and is made of a rugged, durable, shockproof construction.

40% wool, 25% polyester, 25% polyacrylics, 10% viscose. Thick, soft and warming quality. Prewashed! – No felting, no shrinking. 3-gage. Pretty mélange colors. 3-Pack. Brilliant value for money. Sizes: 35/38, 39/42

40% polyacrylic, 40% wool, 10% alpaca wool, 10% polyester. Our art. 2194 is prewashed - which gives the socks a particular nice grip! 3-gage. Soft and thick quality, cuddly and warming. With double cuff. Assorted colors. 2-pack. Sizes: 35/38, 39/42, 43/46

It is covered with acoustic soundabsorbing fabric which is resistant to impact on the front surface of the fabric covered wall panel and the inner material of the panels is glass wool. The rear surface is covered with glass cloth. Fabric Coated Wall Panels normally used on walls to ensure sound insulation and decorative, but can also be applied in ceiling. Special production can be done but in general sizes are standard. You can reach the gauge from below. Thickness is not noticeable in sound absorption, but it is more effective than the thicker one. If you want, you can get different designs with different thicknesses. Besides the sound absorber, fabric coated acoustic panels can be used on the final layer with a decorative appearance and are easily applicable on concrete or plasterboard surfaces

Precise benchtop measuring instrument for the flanged edge of the can. It can be used on different can formats.

TOPTICA’s TeraFlash smart utilizes a proprietary scheme dubbed ECOPS ("electronically controlled optical sampling"). The system comprises two synchronized femtosecond lasers, eliminating the need for a mechanical delay. This results in extremely high measurement speeds: the TeraFlash smart acquires 1600 complete terahertz waveforms per second, enabling terahertz-based thickness gauging at unprecedented speed. The system thus lends itself to measurements on rapidly moving samples, e.g. conveyor belts, papermaking machines, or extrusion lines. Learn more about TOPTICA's advanced terahertz solutions.

Product Features: • Sizes A to E are 20 gauge 0.036" thick steel. • Sizes F to J are 18 gauge 0.048" thick steel. • Self-tapping screws included. • ASA 61 grey baked powder paint.

Thickness measuring systems THICK-SCAN behind the ContiRoll® optimizes the process and to reduces the costs while, at the same time, assuring the quality standard. If the gauges are located in the sanding line, the tool life of the sanding belts is enhanced and the quality is assured. The time is long past since panel thickness tolerances have been measured during production by handheld devices. Today, however, such measurement is carried out continuously online. In the majority of plants, quality control is not the rst priority for new investment for online thickness measurement. The current trend is to achieve the enormous potential savings in wood raw material, resin and energy consumption. If the upper tolerance level is exceeded, valuable resources are wasted. The Thickness Gauge prevents such losses. It is robust and reliable.

Proven for decades The contact gauges that measure the thickness of the strip with an accuracy of a few micrometres are renowned for their outstanding precision and exceptional reliability: Almost 2000 systems that have gone into operation worldwide in recent decades are still in use even today. They still form an integral part of the measurement technology in new plants where the highest precision is demanded. Flexible from 0.01 to 24 mm Tactile measurement is employed at all stages of the strip production process – on the annealing line and during rolling, on the finishing line or during strip processing as well as in the steel service centre. Vollmer delivers the systems in different versions for thicknesses from 0.01 to 24 mm. Precise even on wavy strip With a measuring precision of down to one micrometre per millimetre of strip thickness, they meet the demands of modern rolling mills. Contact gauges adapt to the strip passage and follow any waviness of the material.

Proven for decades The contact gauges that measure the thickness / width of the strip with an accuracy of a few micrometres are renowned for their outstanding precision and exceptional reliability: Almost 2000 systems that have gone into operation worldwide in recent decades are still in use even today. They still form an integral part of the measurement technology in new plants where the highest precision is demanded. Flexible for up to 9 mm strip thickness / 32 mm strip width Tactile measurement is employed at all stages of the strip production process – on the annealing line and during rolling, on the finishing line or during strip processing as well as in the steel service centre. Vollmer delivers the systems in different versions. Optional the strip thickness gauge can be equipped with an additional strp width measurement unit.

The new standard for precision and speed With the new VTLG Series laser systems, Vollmer is giving strip thickness measurement new impetus: They combine the highest precision with rolling mill-oriented design. Thanks to their unique measuring method, they are suitable for use in cold rolling mills. With a measuring precision of ± 1 µm and scanning rate of up to 80 kHz, they offer the precision and speed necessary for the control of the strip thickness. VTLG systems are the only laser gauges to measure the strip thickness during rolling in the mill, thus opening up completely new possibilities in production and quality assurance for our customers. As with our contact gauges, they measure the thickness irrespective of the alloy – ideal preconditions for use in the rolling mill, but also on the annealing line, in the finishing section, on the strip edge miller or in the steel service centre.

The radiometric gauges from Vollmer operate contact-free and measure from a safe distance. They are characterised by their extremely narrow design: With some systems the C-frame is only 120 mm wide. The X-ray systems from Vollmer have digital detectors which give them extremely low noise values. Vollmer supplies the systems with high-quality ceramic tubes and the necessary cooler. The isotope systems also have digital detectors. A particular feature of the Vollmer systems is that the radiation source is located in a special tungsten drawer that can be easily removed from the gauge. Alloy compensation is made either in the classic manner using calibration plates or alternatively at the computer according to the customer's chemical alloy analysis or simply with a small contact thickness gauge that measures the absolute thickness at the start of the pass and transmits this value to the radiometric thickness gauge.

We offer a comprehensive range of super mirror marine polished stainless steel tube in grade 316 (1.4401). The size range covers tubes from ½” (12.70mm) – 2.1/2” (63.50mm) with a 16 gauge (1.6mm) wall thickness. Suitable for marine environments and high-chloride exposure.