Thermoforming packaging machines - Import export

MULTIVAC's machine portfolio is unique in the market - and offers the most economical solution for every requirement in terms of size, performance and functionalities.

The perfect thermoformer for packing your sliced products Whatever you slice – wePACK: Right from the start, the development of the wePACK was focused intently on the requirements of our customers. The result is a packaging machine which is consistently geared to slicing applications and which delivers maximum output, as well as ease of operation and servicing. Thanks to its hygienic design and a high level of automation, the wePACK guarantees maximum food safety. From product preparation to quality checked primary packaging, we offer everything from a single source. This unique situation takes the integration of slicers, automation, packaging and end-of-line equipment to a new level. Weber combines strong single components to even stronger complete line solutions. The boundaries between individual components disappear, so that the complete slicing line merges into one unit. NEW: Optimized software for the integration of infeeding systems

High-output thermoform packaging machines from MULTIVAC have dominated the market for decades. We continue to set the benchmark with our innovative, high-performance, and resource-saving solutions.

With automatic lines for slicing and packing sausage, ham and cheese products, MULTIVAC realizes the optimal connection of slicers to thermoforming packaging machines and traysealers.

Thermoforming films are intended for professional thermoforming packaging appliances and machines.

Our range of products includes an upper film which tightly seals packaging. The technique allows to preserve the quality, freshness and taste of cold meat. It is suitable for use on high speed flow-pack machines and as a top film in MULTIVAC thermoforming packaging machines. Our product line includes also a resealable type of such packaging.

The AV is the classic of our variety of composite films featuring a wide range of applications. With its 5-7 PA/PE layers, available in thicknesses from 70 to 300my, it runs perfectly as a bottom film on thermoforming packaging machines, due to its excellent formability. This standard film offers a medium barrier against oxygen and water vapour. Its high degree of transparency and gloss make the products stand out at the point of sale, while its excellent sealing properties, puncture resistance and exceptional mechanical strength are equally impressive. The AV tolerates temperatures of up to 70°C for up to 2 hours and is therefore also suitable for pasteurisation. Features of AV: Medium barrier against oxygen and water vapour Highly transparent Very glossy Excellent sealing properties Increased puncture resistance

The AV is the classic of our variety of composite films featuring a wide range of applications. With its 5-7 PA/PE layers, available in thicknesses from 70 to 300my, it runs perfectly as a bottom film on thermoforming packaging machines, due to its excellent formability. This standard film offers a medium barrier against oxygen and water vapour. Its high degree of transparency and gloss make the products stand out at the point of sale, while its excellent sealing properties, puncture resistance and exceptional mechanical strength are equally impressive. The AV tolerates temperatures of up to 70°C for up to 2 hours and is therefore also suitable for pasteurisation. Features of AV: Medium barrier against oxygen and water vapour Highly transparent Very glossy Excellent sealing properties Increased puncture resistance

The AVS is a 5-7 layer PA/PE/SURLYN® film used on thermoforming packaging machines as both top and bottom film. Integrated ionomers ensure excellent meat adhesion and optimum sealing properties, even if the sealing surface has been contaminated with water, blood, fat or product juices. The ionic crosslinks are reversible as they dissolve at usual processing temperatures and form again during the cooling phase. This type of film features both excellent recovery properties and meat adhesion and is therefore ideal for the production of cooked ham. Its temperature tolerance allows cooking processes above 76°C – even for up to 12 hours. Features of AVS: Excellent meat adhesion Reduced jelly separation during cooking Medium barrier against oxygen and water vapour Extremely high transparency Outstanding sealing properties, even with contaminated sealing surfaces IONOMER-FAMILY STRUCTURE STANDARD THICKNESSES AVGTS 7 Layer PA Special/PE/SURLYN® film 230my AVS 5 - 7 Layer PA/PE/SURLYN® film

Thoothed blades for SIG® SANDIACRE® ROVEMA® FOREGROVE® PRASMATIC® OMORI® MULTIVAC® MIELE® MESOMA® MECAPACK® ILAPAK® HAYSSEN® COMMARME® BOSCH® AQUARIUS® TECNIMODERN® TETRA® TWINPACK® ULMA®

This coin feeder enables continuous feeding of a coin sorting machine or a coin wrapping machine. Fill level controlled by detectors. Adaptation to your coin trolleys. - Robust frame made of epoxy painted steel - Hooking device for all types of trolleys - Specially designed trolley that is easily handled and adaptable to the forklift truck - Possibility of manufacturing to your dimensions depending on the quantity required - Height adjustable from 500 to 1300 mm - Dimensions can be changed on request - Speed: up to 7000 pieces/min - Speed control by variator The materials comply with the applicable EC standards.

System for bundling coin rolls of 5 or 10 pieces and shrinking in PE film. Elements of serial production: - Robust steel frame, painted grey in RAL 9006 - Welding frame with Teflon-coated heating rods with constant temperature controlled by temperature controllers with digital display - Motorised unwinding of the coil - Control generated by a programmable logic controller - Touch screen display - Storage of programmes - Automatic change of designations - Detection of the end of the spool - Translucent housing - Material according to current EC standards Foils that can be used: Polyethylene

CMK 85/55-S3 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, ete. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 75″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings

CMK 95/65-S4 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, flower pots and seeding trays. Machine has the bigger forming area than 85 series station machine, and it is better if high is targeted. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors

CMK 95/65-S3 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, ete. Machine has the bigger forming area than 85 series station machine, and it is better if high capacity is targeted. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors

Synchronized forming and cutting by tilting movable lower platen to 80 degrees Sheet pitched by double toothed chains and move on abrasion resistant slide plates; Lengthened pan design allows to reach optimum forming heat without using pre-heater machine Upper and lower Mold ; heats control by indivudial Thermoregulation device Fine adjustment for mold by electric drive. Traversing and tilting moving system of mould PLC for control the line operation and supervise working parameters Opportunity to set one or more forming cycles without cutting by pneumatic drive High production capacity with resistant to high speed Strong and vibration free main body Double inlet- outlet system for fast cooling by increasing water discharge. Energy analyzer which gives amount of the electric consumption Cutting adjustment possible by digital meter ,controlled by PLC. Plug asist motor

Thermoforming machines for disposable food cups and sheet line extrusion , ofset printing machines

Automatic Packaging Machine for Small Parcels Automatic Packaging Machine for the simple and fast packaging of shipments in extensible stretch film (black or transparent) secures the packaged goods and protects them from dust and moisture. With the WR1050M Packaging Machine, transport will be faster and more efficient, and packaging will be more economical and more aesthetic. Thanks to the semi-automatic packaging, the operator can pack the parcels with minimal effort. The sold equipment consists of a main frame and 1 dispenser for stretch film with a width of 250 mm. The main benefits: - easy and safe handling; - semi-automatic packaging; - height adjustable frame; - height-adjustable work table; - continuous regulation of the foil tension.

Manual packing machine for boxes The Manual Packaging Machine for the simple and fast wrapping of parcels in stretch film secures the packaged goods and protects them from dust and moisture. With this equipment, transports will be faster and more efficient. With the help of the WR1050H/WR1400H packaging machine, packaging becomes more economical and more aesthetic. Maintenance of the equipment is very easy, thanks to the reliability of the machine. The sold equipment consists of a main frame and 1 dispenser for stretch film with a width of 250 mm. The main benefits: - easy configuration and simple operation; - efficient and economical method of packaging; - quality and robust design; - durable surface finish; - optional accessories;

We supply our plastic thermoforming machine for different product solution. For example cup, dish, plate, lid, bowl, medical, clamshell etc. We have also different production capacity options on our thermo molding machine. We supply the quality, international standards and performance together with our plastic thermoforming machines. You will have high production capacity with low power consumption with our thermoforming machines, with our advanced software and technology. You can achieve easily to European Quality Level on your products, with the help of our European technology. Just contact with us for your thermoforming machine research, we will provide the optimum solution for your machine research.

The versatile thermoforming machine for precisely shaped plastic parts

The versatile thermoforming machine for precisely shaped plastic parts

FULL MOTION CONTROLLED WET WIPES PRODUCTION LINE WITH TEN SERVOS AND TWO COILS Wet cleaning, towel (baby) wipes, etc. production can be made.

Sleeve Wrapping Machines by Zappe – wrapping machines and shrink tunnels that adapt to your needs

Zappe configures your blister machine to measure, regardless of whether it is a manual, fully automatic or semi automatic blister sealing machine.

Ceramic coated injector blade in stainless steel for plastic film manufacturing. The fine structure enables the coating to protect the edge as long as possible. Ceramic coating is therefore advantageously used to cut white plastics. The injector blade with a thickness of 0.25 mm is a strong and small blade with high durability. For finer and thinner cuts, Sollex recommends ceramic coated industrial razor blade (2-013-K). Suitable for: White plastic film with a high percentage of chalk Dimensions: 38 x 8 x 0.25mm Grinding: Single edge Two sided Single bevel

Suitable for granule type of products. The weighing unit is controlled by a seperate microprocessor and touch screen.Supports many usefull functions such as multi dumping, automatic product conveyor control, self cleaning, recipe record for different products, different language and etc. Different amount of weighing buckets in different dimensions should be provided with respect to type of product. Parts touching to products are easy to dismount and cleaning. All surfaces touching to products are AISI 304 stainless steel. Sutiable for quadseal packages Easy dismountable collar set design. Package length should be controlled by print mark or feeding duration. Printer state is checked continously. Wrapping material is feed by Servo motors. Servo Motor Controlled Horizontal sealing and cutting. Impulse or heat sealing units for different type of wrapping materials. Wrapping material tension is controlled continously. Auotamic lateral adjustment of wrappin material.

Suitable for granule type of products. The target weight is controlled by linear vibration units. With respect to product type and desired speed; 2 or 4 line types are available. The magnitude of vibration level for each line is adjustable. The accuracy of each filling is controlled by tuning each line vibration magnitude. The average accuracy is depend on product type. All surfaces touching to products are AISI 304 stainless steel. Easy dismountable collar set design. Package length should be controlled by print mark or feeding duration. Printer state is checked continiously. Wrapping material is feed by Servo motors. Servo Motor Controlled Horizontal sealing and cutting. Impulse or heat sealing units for different type of wrapping materials. Wrapping material tension is controlled continiously. Auotamic lateral adjustment of wrappin material. Suitable for CE standarts. 7 inch touch screen wtih several languages.

Volumetric filling system is suitable for products which are able to free falling and homogeneous in density.the Weight of each filling is controlled by adjusting the dimensions of filling cups. Different cups with adjustable dimension should be used for different type of products.The sensitivity of target weight is equal to sensitivity of product density. All surfaces touching to products are AISI 304 stainless steel. Easy dismountable collar set design. Package length should be controlled by print mark or feeding duration. Printer state is checked continuously. The wrapping material is feed by Servo motors. Servo Motor Controlled Horizontal sealing and cutting. Impulse or heat sealing units for different type of wrapping materials. Wrapping material tension is controlled continuously. Automatic lateral adjustment of wrapping material. Suitable for CE standards. 7 inch touch screen wtih several languages.