Results for
NEWSUN PV TECHNOLOGY CO.,LTD
China
NSPV BIPV junction box for solar Features: CE and TUV certified; IP68 degree of protection; Low typical contact resistance; small size for BIPV system; Matching with MC4 connectors.
Request for a quoteRITTAL
Belgium
Terminal boxes, stainless steel 1.4301 (AISI 304), Protection category IP 66. KL Terminal box, WHD: 150x150x80 mm, Stainless steel 1.4301, without mounting plate, with cover, without gland plate
Request for a quoteRITTAL
Belgium
The small enclosure KX, terminal box KX, without a gland plate allows for flexible interior installation while maintaining a high protection category. The small enclosure KX, terminal box KX, without a gland plate allows for flexible interior installation while maintaining a high protection category. KX Terminal box, WHD: 150x150x120 mm, sheet steel, without mounting plate, with cover, without gland plate.
Request for a quoteTAIHAN FIBEROPTICS
South Korea
# Description Taihan Fiberoptics’ drop cables provide durability and reliability in the last mile network and it can be used for all applications, such as overhead, facade and duct. This drop cable can connect directly from the splitter distribution point to the optical network terminal without any home termination box. # Features - Indoor, Outdoor, Indoor/Outdoor applications - Universal deployment: Aerial and Duct - Compact Design - Easy to remove the outer sheath - Light Weight - Excellent Crush Resistance - Minimized installation cost # Products - Round In/Outdoor Drop cable - Flat Low Friction Drop Cable - Flat Fig.8 Drop Cable - Round Tight Buffer Drop Cable - LT Flat Drop In/Outdoor Cable - Simplex Flat Drop In/Outdoor Cable
Request for a quoteFOCQUET
Belgium
"Aluminum motors offer a lighter solution to our customers, compared to a cast iron frame. STANDARD ALUMINUM MOTORS (OUR CODE: MA) - Three-phase motors with aluminum cage - IP55 protection - Class F insulation - Class B heating - Removable feet, which allows the terminal box to be turned to the desired side - Stored in 230/400V - 400/690V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B14-B35-V15-B34 - Motors from size 56 to 160 - These motors can be equipped with options such as special sensors like PTO or PT100 - IP56 option - Standard motors equipped with PTC sensors - These motors can be equipped with options such as special sensors, purge holes, heating resistors, umbrella covers, specific epoxy paint - C3M- C5M - Three-phase forced ventilation (code VF) or single-phase (code VFW).
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Electrical flange type immersion heaters The series of electrical Flange Type FHK-L provides a solution for the heating of liquids / molten salts or similar applications in process tanks or underground tanks. It can also be tank filling levels with very low heat, since only the lower horizontal portion is heated. The flange heater consists of a number of heating elements, which are built into the process flange. The electrical wiring is done in a robust electrical terminal box.
Request for a quoteKAISER-MOTOREN GMBH
Germany
Stainless steel motors are used in sanitary areas such as in the food and beverage industry or in the pharmaceutical sector. The smooth surface of the motors is designed in accordance to the EHEDG guidelines to avoid dirt accumulation. To ensure longlasting and lowmaintenance operation, critical components such as bearings and seals are specially tested. Due to an extensive stock of motor components, standard and special motors can be delivered in a short time. Here are some of the common specifications Sizes 63160 0.18 to 22 kW 2 8 pole windings Special windings Enclosure IP66, optional IP69K Special shaft ends Terminal box or cables
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
EEx’e‘ certified immersion heater EEx e T1 – T6 ATEX The “FHK-Exe” type electric immersion heaters are EExe certified. These heaters are custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The range of immersion heaters type FHK-Exe offers an economic heating solution for process tanks, pressure vessels and similar plant. The standard heater consists of a number of rod elements TIG welded into a process flange. A robust Ex’e’ terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Immersion heater with cores The range of core immersion heaters type FHK-P offers a heating solution for liquid media where a low heat density is required. The special element / sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of core elements fitted into a process flange. A robust terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Electrical flange type immersion heaters The range of immersion heaters type FHK offers an economic heating solution for process tanks, pressure vessels and similar plant. The standard heater consists of a number of rod elements TIG welded into a process flange. A robust terminal box protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit
Request for a quoteNORELEM FRANCE
France
The hygienic stainless steel quarter turn lock prevents bacterial attack and fulfils the strict regulations of testing principles for foodstuff machinery and hygien. The well concieved geometric form, the mirror polished stainless steel surface and the central circumferential seal reliably prevent dirt accumulation. Water, cleaning agents etc. can drain off fully and so prevent contamination. Especially in processes where the resistance of the seal to cleaning and disinfection agents is very important, optimised control cabinets, terminal boxes and command panels are a must. Specifically designed after the principles of Hygienic DESIGN, the hygienic quarter turn lock HD fulfils the strict regulations of the foodstuff processing industry and passes therefore optimally in their professional hygienic applications. The special seal is suitable for high pressure washing up to max. 100 bar and fulfils IP65/67. Furthermore, the seal is temperature stable up to 80°C and the blue
Request for a quoteNORELEM FRANCE
France
The hygienic stainless steel quarter turn lock prevents bacterial attack and fulfils the strict regulations of testing principles for foodstuff machinery and hygien. The well concieved geometric form, the mirror polished stainless steel surface and the central circumferential seal reliably prevent dirt accumulation. Water, cleaning agents etc. can drain off fully and so prevent contamination. Especially in processes where the resistance of the seal to cleaning and disinfection agents is very important, optimised control cabinets, terminal boxes and command panels are a must. Specifically designed after the principles of Hygienic DESIGN, the hygienic quarter turn lock HD fulfils the strict regulations of the foodstuff processing industry and passes therefore optimally in their professional hygienic applications. The special seal is suitable for high pressure washing up to max. 100 bar and fulfils IP65/67. Furthermore, the seal is temperature stable up to 80°C and the blue
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Electric duct heater Electrical duct heater type “LEH-R” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with adapters to flanges DIN EN 1092 Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box
Request for a quoteOHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
EEx’e’ certified electric duct air heater EEx e T2 – T6 ATEX The “LEH-Exe” type electric heaters comprise a range of certified EEx e air duct heaters, custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
OHMEX INDUSTRIELLE ELEKTROWÄRME GMBH
Germany
Electric Air heater Electrical air heater type “LEH-A” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The air heater essentially consist of the following main-components: Process flange Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
OKS 1105 prevents the formation of electrically conductive layers and minimises the risk of flashovers and dielectric losses. The insulators and switchgear covered with the paste thus maintain a good insulation resistance. Sealing lubrication for electrical or electronic equipment such as relays, plug-in connections, cable lugs and lamp sockets Protection of insulators and switchgear in humid atmospheres, for example of junction boxes, screw terminals, overload cutouts at high-voltage pylons, connecting cables and terminal connections Lubricant for plastic screw connections and other moving parts of metal, ceramic, plastic Advantages and benefits Excellent water repellent properties Excellent surface wetting Good adhesion on glass, porcelain and plastics Stable consistency across a wide temperature range Very good resistance to chemical and weather-based influences (e.g. ozone, UV radiation) Neutral with regard to many materials
Request for a quoteFERPLAST SNC
Italy
IDLE ROLLER CONVEYORS EXTENSIBLE WITH METAL ROLLERS Roller conveyors extensible with metal rollers for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase.
Request for a quoteFERPLAST SNC
Italy
Extendable roller conveyors with plastic wheels and galvanized steel pantograph structure for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase.
Request for a quoteFERPLAST SNC
Italy
Roller conveyors extensible with metal rollers for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase.
Request for a quoteRUHRGETRIEBE KG
Germany
Compact two-stage worm gear motor with solid shaft. GP-SN4F worm gear motor: Motor power available in 57W and 90W Supply voltage 24VDC High gear ratio range between 10:1 and 5000:1 Output speeds between 0.6 and 300 rpm (depending on the gearbox ratio) Effective torques between 1.5 and 7.8 Nm (depending on the gearbox ratio) Cable version (IP40) and terminal box version (IP54) Customizing options: — Shaft dimensions according to customer specifications — Flange dimensions according to customer specifications — Adaptation of motor power and supply voltage Do you have questions about our worm gear motor or need help with the selection? Our sales team will be happy to contact you in order to find the right gear motor for your application!
Request for a quoteLMT SRL LUX
Italy
DiAm line is ideal to intake or exhaust air through circular ducting in: public locals, offices, shops, bars, pools, laboratories, kitchens, toilets, workshops, restaurants etc. its compact steel structure, external rotor motor and centrifugal backward bladed impeller ensure: • easy installation; • flexible working by adjusting the rpm; • high efficiency; • sturdiness and reliability. rANGE This line consists of 6 models with diameters from 100 up to 315mm. cONSTrUcTiON • casing in weather proof steel sheet. • Steel sheet motor supports with airflow straighteners. • External rotor motor iP44 protection iSO B, speed adjustable by electronic speed regulator. • High efficiency backward blade impeller. • Terminal box in techno-polymer. TEcHNicAlSPEciFicATiONS • conveyed air: clean. • Temperature air: -20°c/ +50°c. • Voltage and frequency: mono phase 230V-50 Hz.
Request for a quoteCOMPUR MONITORS GMBH & CO. KG
Germany
Combustible Gas Detection - upgrade to upper class! Monitoring the environment for explosive gases most of the time you would be looking for hydrocarbons. It is a characteristic of hydrocarbons that they have a number of C - H bonds. These bonds absorb infrared light at a wavelength of 3,4 mm ( unsaturated hydrocarbons absorb at 3,3 mm ). This effect can be used to reliably detect these substances The most important advantage is that they are resistant against catalyst poisons and high concentrations. They can even be used in oxygen free atmosphere. Another important advantage of this technology is that a failure cannot go unnoticed. If an important component such as the lamp or the detector fails, the system will recognise this as 100 % absorption (an alarm situation). Most infrared gas detectors are designed as so - called NDIR (Non Dispersive Infra Red) double- beam detectors. This means, the light beam is divided in two portions with different wavelengthes. One is the measuring beam that will be absorbed by gas, the other is a reference beam at a wavelength that will not be absorbed by gas. This beam compensates for intensity variations of the lamp, dirt and corrosion. As the optics are mostly self maintained, an eventual inspection only checks if there is gas access to the sensor. Therefore much longer maintenance intervals compared to the catalytic sensor can be justified. As a rule of thumb, twice as long is OK. For plants which already have installed a combustible gas detection system, there is now a chance for a very cost- effective upgrade: The Statox 501 LC IR or LC MR! It consists of an EEx e (enhanced safety) terminal box and a sensor with integrated electronics. This sensor operates at the same supply voltage as a catalytic sensor. Its output signal is also identical to the signal of a catalytic sensor! This new innovative technical approach keeps the price in the same ballpark as catalytic sensors! All advantages of an infrared gas detector are now available for nearly the same price as a catalytic sensor and existing gas detection systems can now be upgraded without replacing the existing hardware. Of course the miniaturised chip inside the sensor cannot provide the same powerful electronics and software package as a high- end instrument, but however the new Compur Statox 501 IR LC features the most important advantages of an infrared system. So the next time maintenance is due with your gas detection system, check with Compur Monitors. The investment for an upgrade might pay back within one maintenance interval.
Request for a quoteIRIDA LLC (UFANET GROUP)
Russia
The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.
Request for a quoteIRIDA LLC (UFANET GROUP)
Russia
Designed for installation in hallways and staircases. Is used for PON networks in apartment buildings. The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.
Request for a quoteKGA ENCLOSURES LTD
United Kingdom
Product Features: • Used in chimes, door bells, security systems, decorative lighting, furnaces, humidifies, appliances, vending machines, intercom system type applications. • Rugged, low noise design, indoor use only. • Stripped wire input (primary) leads, screw terminal output (secondary). • Mounted on box plate for easy installation. • Input leads are black 6" minimum, on 240V models 240V lead is red. • All models are designed for 50/60 Hz. operation - limited by built in circuit breaker. • c UL us listed #E184371 - Class 2 Not inherently limited. • CSA certified (209651).
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
Thanks to extremely compact design the overexcitation rectifier "Slim Collection" can be installed in very restricted space. The module features a central bore for screw fixing inside the terminal box. It can also be installed by using an adhesive pad.
Request for a quoteResults for
Terminal boxes - Import exportNumber of results
37 ProductsCountries
Company type
Category