Technical solvents - Import export

TECHNICAL DEFINITION Cement-based powder filler with fibres for treating damaged exterior substrates. The filler is multi-purpose: can be used to fill, repair and rectify wall surfaces, with a smooth finish. SUITABLE SUBSTRATES All types of substrates : cement, concrete, concrete blocks, stones, brick, old paintwork, old tiling. COVERINGS Once the filler is completely dry, can be covered with all types of coatings and paintwork. Do not directly cover with solvent-borne paint. TECHNICAL FEATURES • Setting time: 30 to 40 minutes • Adhesion: complies with EN 16566 • AFNOR NFT 36.005 classification: Family IV class 4c MIXING PROPORTIONS • 6 to 6.5 litres of water per 15 kg bag • 2 to 2.2 litres of water per 5 kg bag • 0.4 - 0.43l of water for 1 kg • 2 volumes of water for 5 volumes of powder APPLICATION Application with a plastering spatula, knife, smoothing trowel. Clean tools with water. COVERAGE Approximately 1 kg per m²/mm of thickness.

TECHNICAL DEFINITION Ready-to-use, solvent-free adhesive primer for smooth or hardly porous substrates, for interior and exterior use. BETON HAFTGRUND allows to achieve an adhesive bridge between such substrates and certain cementor plaster-based products with a relatively low bond. COMPOSITION AND APPEARANCE Pink, ready-to-use primer with visible grain. Paintlike consistency. ACCEPTED SUBSTRATES Can be applied onto interior and exterior walls, and also onto ceilings. • Smooth cast-in-place concrete • Self-levelling concrete • Old paintwork • Old painted fibreglass coverings APPLICATION BETON HAFTGRUND is to be applied using a brush or a woollen roller. Apply a liberal coat onto the substrate and allow to dry before covering. The drying time will depend on the substrate and ambient conditions. As a general rule, allow for approximately 6 hours.

100% ozone friendly solvent - meaning zero ODP. Excellent removal of greases, oils and flux residues and acrylic protective coatings from printed circuit boards (PCBs) Leaves a perfectly clean, dry surface – traditional solvents often leave it greasy. It is harmless to most plastics, rubbers, elastomers and surface coatings. NDD is compatible with a wide range of plastics.

Composition: Propriotory blend of surfactants Blend of anionic & nonionic surfactants which is the recommended package for EC formulation. Provides a stable emulsion with technical particles and non-polar solvents Emulcore® EC 70 is O/W emulsifier used in various formulation, technical & solvents Emulcore® EC 70 is oil adjuvant emulsifier When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Safety Data Sheets and other product safety information, contact the Latro’s Sales Office nearest to you. Before handling any other products mentioned in the text, you should obtain available product safety information and take the necessary steps to ensure safety of use. Up to one years from the date of manufacture for material in original unopened, properly stored containers.

Composition: Propriotory blend of surfactants Emulcore® EC 50 it is a blend of anionic & nonionic surfactants which is the recommended emulsifier for EC formulations. Provides a stable emulsion with technical particles and non-polar solvents Emulcore® EC 50 is O/W emulsifier used in various formulation, technical & solvents Emulcore® EC 50 is oil adjuvant emulsifier When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Safety Data Sheets and other product safety information, contact the Latro’s Sales Office nearest to you. Before handling any other products mentioned in the text, you should obtain available product safety information and take the necessary steps to ensure safety of use. Up to one years from the date of manufacture for material in original unopened, properly stored containers.

Composition: Propriotory blend of surfactants Blend of anionic & nonionic surfactants which is the recommended package for EC formulation. Provides a stable emulsion with technical particles and non-polar solvents Emulcore® EC 35 is O/W emulsifier used in various formulation, technical & solvents Emulcore® EC 35 is oil adjuvant emulsifier When considering the use of any Latro’s products in a particular application, you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely. For Safety Data Sheets and other product safety information, contact the Latro’s Sales Office nearest to you. Before handling any other products mentioned in the text, you should obtain available product safety information and take the necessary steps to ensure safety of use. Up to one years from the date of manufacture for material in original unopened, properly stored containers.