Technical position - Import export

Housing polyamide 6. Hollow shaft steel. Screen plastic. Grub screw steel. Version Impactresistant housing. Hollow shaft black oxidised. Grub screw black. Dial black, digits white. Note Position indicators allow direct reading of input measurement values at a glance. In addition, the value indicated per spindle rotation (corresponding spindle pitch) can be selected and the various indicator values are realised by a transmission gear. The position indicators are distinguished by their small construction with very clear display. They are especially suitable for small spindle distances and small shaft diameters and have a torque support that is positioned in a hole on the side. ** At the 1st asterisk give assembly position and at the 2nd asterisk give the count direction (see sample order “assembly position, count direction”). Technical data – Counter consisting of 3 10position dials – Height of figures about 4 mm – Hollow shaft Ø 10 H7 mm

Precise analytical engineering comes to be an acute aspect in a case the complex project development. One involves a structural analysis of each individual component and the entire structure as a whole. Correct technical parameter computation is especially important while designing equipment parts or complexes. Both cases, product complexity compression to a technically safe and functional level positively affects its cost in terms of material savings. To conduct strength calculations — a key parameter determining the material cost and design features of the future product shape — a completely separate class of engineering specialists is required. Strength Engineers use all their vast experience and the entire breadth of technical mechanics, materials, geometry, and even architecture knowledge base to build the most functional and reliable product, parts, and entire complex project designs.

The ice chisel is suitable for conveniently chopping holes in the ice. The ice chisel comes with three pieces. It can be assembled with all three or only two parts, so the length of the chisel can be easily changed. Thanks to the original design of the stepblade, it is easy to effortlessly make clean holes. This ice chisel provides quick and accurate determining thickness and hardness of the ice. Thereby, it serves as a probe when moving on the ice surface, providing protection from falling through the ice. The chisel has a loop, which protects it from losing in the water. The ice chisel is light and foldable. It comes with a bag, which is why it is easy to carry. Technical Details Length in working position 1380 mm Length in transport position 520 mm Handle diameter 35 mm Weight 2.8 kg

The GX static mixer has been used successfully for the laminar flow mixing and/or dispersion of viscous fluids for over 35 years. It is a high performance static mixer capable of mixing materials with equal or very large differences in viscosity and volumetric ratio. Mixing is accomplished in a short length with a very high degree of mixing. Mixing Capabilities Mix fluids with similar viscosity Mix fluids with high and low viscosity (1 million : 1) Mix fluids with large differences in volumetric ratio (1,000 : 1) Disperse and mix polymers with blowing agents Thermal homogenization Viscosity homogenization Applications Polymer manufacture and processing. Two (2) component viscous materials such as Liquid Silicone Rubber (LSR), adhesives, polysulfide, sealants, epoxy resins, polyurethanes, etc. Plastics Extrusion Materials of Construction, Housings and End-Connections The GX static mixer can be supplied in most materials of construction, pipe/tube housings with virtually any end connection (Figure #13). GX-P mixing elements in 9.3 - 9.4mm outside diameter size are also available in plastic construction. History of GX Static Mixing Structure The GX static mixer was invented by Bayer AG of Leverkusen, Germany in the mid 1970’s. Bayer used the GX static mixer extensively in their polymer plants and subsequently licensed the design to Sulzer Chemtech of Winterthur, Switzerland who trademarked the design as the SMX* static mixer. Sulzer did a tremendous amount of fundamental high quality R&D work on the SMX structure and commercialized the SMX static mixer in tens-of-thousands of successful installations. The founders of StaMixCo held key technical and management positions in the Koch Engineering (the later Koch-Glitsch)-Sulzer Chemtech team that commercialized the SMX static mixer. Bayer licensed their 2nd generation of the SMX static mixer to StaMixCo which is branded as the GXR structure with integral support ring around the X-Grid mixing bars as described in a previous section of this web site. * StaMixCo is not a distributor of or affiliated with Sulzer Chemtech. SMX is a brand and trademark of Sulzer Chemtech.

Collaborative robotic complex (CR) with carrying capacity of 5 kg is designed for automating cyclic production technological processes performed in a human-robot collaboration. Features: - Application of own driving decision developed by JSC “IC SPA “Android Technics”; - High level of positioning accuracy and repeatability due to the special algorithms of the control system; - Visually clear and user-friendly control interface; - Easy mounting, programing and resetting for new tasks performance. Content of additional software: - ETS (annual updating and maintenance); - Subject specialization; - Ready decisions regarding integration of CR in digital production. Warranty period: 12 months.

Size: 40x28x58cm Benefits: - Rapid Cure 10-35 minutes depending on material - Cure large objects up to 346 mm x 195 mm x 400 mm - Maximum throughput with flexible positioning Technical Features: - 76 High Power LEDs for uniform 360 degree post cure - 3 Special Coated Glas Plates with flexible positioning - High Reflection Materials - Long Lifetime LEDs - Touch Display - Safety Controls - Active Cooling - Wavelength 405 nm