Taper lock - Import export

Synchronising pulley HTD-Profil metric pitch HTD5/ HTD8/ HTD14 for taper lock tension bushings

Synchronising pulley imperial profil pitch L/ H / XH for taper lock tension bushings

Full programme for Vgroove pulleys with TaperLock system conical bushings. We can supply complete range of Vbelt pulleys with taper lock system and we are also specialized in the construction of special pulleys whose diameter can reach a maximum of 2500 mm. PiPulleys are produced according to the interational regulations BS 37901981DIN 211ISO 4183. Those pulleys are made of GG25 grey cast iron and a special black phosphating treatment on the surface is added. They can be used up to a peripheric speed of 30 mt/sec. Beyond this limit it is advised to usehigh resistance materials. Our pulleys are balanced according to the ISOG16 standard. Pbushes are made of GG25 grey cast iron and a special black phosphating treatment on the surface is added. They have a H7shaped bore and a complete set of screws to be fixed at the pulley.

Double-row torsional highflex TSCHAN ® TNR 2425.2 for flange-shaft connection and taper lock bushing systems, flange dimensions acc. to SAE J 620 d. Double-row torsional highflex TSCHAN ® TNR 2425.2 for flange-shaft connection and taper lock bushing systems, flange dimensions acc. to SAE J 620 d. In mind of X1 easy replacement of the elastic elements without axial movement of the coupled machines. TSCHAN® TNR The TSCHAN® TNR coupling has specifically been designed and optimized for use primarily in internal combustion engines. In such applications, dynamic disturbances are caused by periodic excitation and utilization of a large speed range. It is therefore necessary to shift unavoidable resonances by deliberately adjusting the stiffness. The new TSCHAN® TNR – a compact, plug-in configuration, optionally available as puncture-proof or not fail-safe design, and dynamically adjustable over a wide temperature range. Key data: Dynamic stiffness: elastic to highly elastic transmission...

Single-row torsional highflex TSCHAN ® TNR 2425.1 for flange-shaft connection and taper lock bushing systems, flange dimensions acc. to SAE J 620 d. Single-row torsional highflex TSCHAN ® TNR 2425.1 for flange-shaft connection and taper lock bushing systems, flange dimensions acc. to SAE J 620 d. In mind of X1 easy replacement of the elastic elements without axial movement of the coupled machines. TSCHAN® TNR The TSCHAN® TNR coupling has specifically been designed and optimized for use primarily in internal combustion engines. In such applications, dynamic disturbances are caused by periodic excitation and utilization of a large speed range. It is therefore necessary to shift unavoidable resonances by deliberately adjusting the stiffness. The new TSCHAN® TNR – a compact, plug-in configuration, optionally available as puncture-proof or not fail-safe design, and dynamically adjustable over a wide temperature range. Key data: Dynamic stiffness: elastic to highly elastic transmission...

These Locking Assemblies are of single-taper design with a self-locking taper providing good self-centering action and concentricity, as well as increased torque capacity. A pre-centering hub section is not required. Integral push-off screws for disassembly are provided. This unit can be placed deep inside a bore due to it’s design. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point. This prevents a bending and lifting of the inner ring during installation and therefore a good dismantling is ensured. Higher Rotation Speed – the Locking Assemblies remain true-to-form during assembly and so they are suitable in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies...

Shaft Couplings RfN 5071 Standard series – this range is the most popular, being used in most applications. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances and fine surface finishes, they also need considerable effort with mounting and removal. The Shrink Disc connection has none of these disadvantages and is better than any of...

Stainless steel series – for applications where corrosion resistance and high transmissible torque is required. This new design of Shrink Disc is made from stainless steel forged rings and uses high strength stainless steel screws. These units are available from 14mm to 195mm bore. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances...

Standard series – this range is the most popular, being used in most applications. This new design of Shrink Disc is made from high alloy forged rings and is practically indestructible. Replacing the smaller 4071 design, these units are available from 14mm to 195mm bore. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances and fine...

Reduced dimensions with lower transmission values – especially for applications with restricted space. As a split version, the SR series is able to offer greater mounting versatility on symmetrical hub designs or can also be used as half shrink discs for lower torque applications. Half shrink discs With half shrink discs HT/HC only 50% of stated T is transmitted. Type HT (Threaded holes in thrust ring) Type HC (Clearance holes in thrust ring) Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very...

Reduced dimensions with lower transmission values – especially for applications with restricted space. This light duty external locking device is the first in the Shrink Disc range and is useful for low to medium torque requirements. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated calculations, close machining tolerances and fine surface finishes, they also need...

Simplified manufacture – only plain shaft and bore diameters with easily achieved surface finish and tolerances are required. Heavy duty series for high torque and bending moment. Easy adjustability - Easy mounting - Easy removal - Low susceptibility to contamination - Highest reliability This product is available in the following configurations: SDA, SDB, SDC and SDD. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed...

Simplified manufacture – only plain shaft and bore diameters with easily achieved surface finish and tolerances are required. Easy adjustability - Easy mounting - Easy removal - Low susceptibility to contamination - Highest reliability This product is available in the following configurations: SDA, SDB, SDC and SDD. Characteristics Shrink discs are the modern method for creating a mechanical shrink fit. The shrink disc consists of either one or two thrust rings with tapered bores and a mating tapered inner ring. By tightening locking screws the thrust rings are drawn together compressing the inner ring and applying pressure to the outside of the hub clamping it to the shaft. Being positioned around the hub there is only one interface transmitting the loads giving the shrink disc method distinct advantages such as offering the possibility of very concentric and well balanced connections that are suited to high speed applications. Traditional shrink fits require complicated...

iwis not only manufactures sprockets and plate wheels according to ISO 606 but also customized versions built in accordance with your specifications, drawings or samples. Sprockets Our standard range of sprockets includes sprockets according to ISO 606 from size 05B-1 to 32B-3. Sprockets with taper-lock bushes Taperlock-bushes for fixing hubs precisely and axially centered on a shaft. Plate wheels Standard plate wheels for the complete iwis product program: sizes 05B-1 to 32B-3. Drive sprockets and idler wheels For the FLEXON Flat Top Chain program. Our drive components program consists of torque limiters, Couplings, Tensioners, Chain tools and etc.