Ta-luft - Import export

The hygienic angle seat valve type 7015 is ideal for applications in food and beverage production. The valve can be used to shut-off product streams, drinking water, CO2, nitrogen as well as sterile steam and sterile air. All wetted plastics are FDA-compliant and conform to EC Regulation 1935/2004 and the EU Plastics Regulation 10/2011. The hygienic angle seat valve is also certified to Technical Instructions on Air Quality Control (TA-Luft) in accordance to ISO 15848-1 and on request can be supplied with an acceptance test certificate in accordance with EN10204 3.1.

The hygienic angle seat control valve type 7025 with integrated digital positioner is specially adapted for use in the food and beverages production. Suitable for controlling product streams, drinking water, CO2, nitrogen as well as sterile steam and sterile air. All wetted plastics are FDA-compliant and conform to EC Regulation 1935/2004 and the EU Plastics Regulation 10/2011. The hygienic angle seat valve is also certified to Technical Instructions on Air Quality Control (TA-Luft) in accordance to ISO 15848-1 and on request can be supplied with an acceptance test certificate in accordance with EN10204 3.1.

Flange gaskets made of Klingersil C4500 - DIN EN 1514-1 IBC Use: Special high-pressure gasket for alkaline media with very high temperatures and hot steam. Carbon fibers and special heat resistant additives bonded with NBR. High-tech material, especially in strongly alkaline media and in the steam area. Fire safety according to API SPEC 6 FA. DIN-DVGW permit, BAM tested, KTW recommended, certified TA-Luft.

Flange gaskets made of Klingersil C4400 - DIN EN 1514-1 IBC Use: Universal high-pressure seal in many areas of food processing and drinking water supply. Very high standard of performance. Aramid fibers bonded with NBR. Resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants. DIN-DVGW permit, BAM, VP-401 tested, KTW recommended, TA-Luft

Pre-compressed ring-set made of expanded graphite and reinforcement to protect against extrusion Characteristics Packingset made by combining two expanded Graphite grades and designs in order to avoid blow out and extrusion and as well enhance the sealability of this valve sealing set. The set was tested and approved by the AMTEC GmbH Lauffen in Germany. The leakage parameters of 8.6 x 10-3 mbar · l/(s·m) complies with the VDI 2440 at +400 °C, which specifies a maximum allowed leakage of 1.0 x 10 -2 mbar · l/(s·m) (test media helium) and is therefore recommended as a high grade seal system. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 160 [bar] Temperature without LiveLoading: t 400 °C Temperature with LiveLoading: t 400 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Power plant technology Chemical industry Petrochemical plants Boiler houses Refineries Approvals TA Luft / VDI 2440 Certificate

Pre compressed Packing set of expanded graphite with Inconel Matrix reinforcement and special PTFE coating Characteristics Ring Set made from special high temperature resistant yarn and pore filling cross section impregnation fulfills with a tested leakage rate of 8.4 x 10 -3 mbar · l/(s·m) the leakage criteria of VDI 2440 +400 °C with a maximum allowable leckagerate of 1 x 10 -2 mbar l/(sm) and is suitable for temperatures up to +300 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +300 °C Temperature with LiveLoading: t +300 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Control Valves Suitable for Power plant technology Chemical industry Petrochemical plants Boiler houses Approvals TA Luft / VDI 2440 Certificate ISO 15848-1 CC1 ISO 15848 test was conducted with 20,000 mechanical cycles and 2 thermal cycles (RT, +200 °C) and passed with a leckagerate of 6.1 x 10 -4 mg/s/m.

Pre-compressed Packing Set of specially impregnated PTFE fiber packing Characteristics Ring set made of pure PTFE packing and PTFE compound bull rings fulfills with a tested leakage rate of 4.2 x 10 -5 mbar · l/(s·m) the leakage criteria according to VDI 2440 +200 °C with a maximum allowable leakagerate of 1 x 10 -4 mbar l/(sm) and is suitable for temperatures up to +200 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +200 °C Temperature with LiveLoading: t +200 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Power plant technology Chemical industry Petrochemical plants Approvals TA Luft / VDI 2440 Certificate

Pre-compressed Packing set of specially impregnated PTFE fiber packing Characteristics Ring set made of pure PTFE packing fulfills with a tested leckage of 6.3  x 10 -6 mbar · l/(s·m) the leakage criteria according to VDI 2440 +200 °C with a maximum allowable leakagerate of 1 x 10 -4 mbar l/(sm) and is suitable for temperatures up to +200 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +200 °C Temperature with LiveLoading: t +200 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Chemical industry Petrochemical plants Approvals TA Luft / VDI 2440 Certificate EU 10/2011 / EG 1935:2004 FDA

Braided of Flexible Expanded Graphite Tape with High Temperature Metal Mesh Reinforcement Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Characteristics Universal plant wide use in static applications Extrusion stability through ultrafine 10 myh metal mesh reinforcement on each strand Non hardening, good reset capability, coefficient of thermal expansion corresponds to the coefficient of steel High temperature and pressure resistance Easy to cut, assemble and disassemble Low coefficient of friction minimizes the adjustment force in valves For valve applications rings should be approx. 25 - 30 % compressed at installation A 99 can be used as bullrings for style A 44 I, P60 and ARF Die formed rings are recommended Contains effective passive corrosion inhibitor Operating range Pressure [p max]: 500 bar Temperature: t = -200… +650 °C pH: 0 - 14 Density: 1.45 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +450...

Braided of Flexible Expanded Graphite Tape with High Temperature Metal Mesh Reinforcement Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal plant wide use in static applications Extrusion stability through ultrafine 10 myh metal mesh reinforcement on each strand Non hardening, good reset capability, coefficient of thermal expansion corresponds to the coefficient of steel High temperature and pressure resistance Suitable for: power plants, petrochemical plants, boiler houses Easy to cut, assemble and disassemble Low coefficient of friction minimizes the adjustment force in valves For valve applications rings should be approx. 25 - 30 % compressed at installation A 66 can be used as bullrings for style A 44, A 44 I and P 60 Die formed rings are recommended Operating range Pressure [p max]: 500 bar Temperature: t = -200… +650 °C pH: 0 - 14 Density: 1.15 g/cm³ Practical useful application data: max. temperature in...

Braid of Flexible Expanded Natural Graphite Tape Reinforced with Inconel Wire Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal use valve packing Expanded graphite of higher quality Coefficient of expansion similar to steel For valve applications rings should be approx. 20 - 25 % compressed at installation Precompressed rings are recommended Operating range Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.20 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Power plant technology Petrochemical plants Boiler houses High pressure- and high temperature applications For higher pressure and temperature applications use suitable bullrings. Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special...

Braid of Flexible Expanded Natural Graphite Tape Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal use in pumps and valves Very good dry-running characteristics No wear, perfect thermal conductivity High quality pure graphite Coefficient of thermal expansion similar to steel Rings should be approx. 20 - 25 % compressed during assembly Recommended as die formed rings Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.15 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses Petrochemical plants High pressure- and high temperature applications For higher pressure and temperature applications use suitable bullrings. Form of delivery This packing can be manufactured from 3...

Braided from Expanded Graphite Tape Reinforced with Inconel Matrix and special PTFE impregnation Characteristics No slip stick effect High cross section density High temperature resistant to minimize emissions Non hardening, good reset capability Coefficient of thermal expansion similar to steel Easy to cut, install and disassemble Low coefficient of friction minimizes the adjustment force in valves Recommended as die formed rings For valve applications rings should be approx. 25 - 30 % compressed at installation Operating range Pressure [p max]: 300 bar Temperature: t = -200… +300 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses High pressure applications Approvals ISO 15848-1 CC1 TA Luft 300 / VDI 2440 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 -...

Carbon Filament Yarn with High Temperature Graphite Blocking Agent Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics High temperature blocking agent increases the cross section density and acts as a form stable pressure bed for the Carbographite fiber Flexible, wear resistant and valve stem protecting Perfect for temperature cycling loads as the coefficient of thermal expansion corresponds to that of steel Excellent as bullring in use with rings of expanded graphite Operating range Pressure [p max]: 30 bar, Velocity [v max]: 15 m/s Pressure [p max]: 300 bar Temperature: t = -40… +550 °C pH: 2 - 12 Density: 1.15 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Suitable for Power plant technology Boiler houses High pressure- and high temperature applications Form of delivery This packing can be manufactured from 3 to 40 mm square as...

Graphite Filament yarn with High Temperature Graphite impregnation Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Characteristics Yarn of highest puricity >99 % C content Universally chemical resistant The addition of high temperature Graphite impregnation increases the cross section density and works as a stable pressure cushion for the graphite fiber Flexible, ressistant ot wear and surface protecting Excellent in temperature cycling, since graphite has a similar coefficient of expansion as steel Excellent as bullring for packing made of expanded graphite Operating range Pressure [p max]: 30 bar, Velocity [v max]: 15 m/s Pressure [p max]: 300 bar Temperature: t = -40… +600 °C pH: 1 - 14 Density: 1.00 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Main application Valves Fittings Gate valves Flaps Suitable for Power plant technology Boiler houses High pressure- and high temperature...

100 % PTFE Fiber with special PTFE Dispersion Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.80 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals BAM FDA conformity EN 1935:2004 in...

Formstable biaxially expanded ePTFE sheets or die cutted gaskets Characteristics Excellent adaption High blow-out resistance No cold flow Chemically inert Technical parameters pH 0 - 14 Temperature: t = -200 … +280 °C Pressure: p = Vacuum … 200 bar Density: 0,95 g/cm 3 (D11 - 0,7 g/cm 3) Minimum Surface pressure: VU (40 bar; 0,01) = 26 Mpa Maximum Surface Pressure: VO = 150 Mpa Minimum surface pressure in operation: BU < 5 Mpa Cold upset compression value: KSW = 40 % Remaining Thickness after compression approx. 15 % higher than values of D11. Main application Flanges Vessels Lids Joints Narrow flanges Bigger uneveness Tension sensitive components (e.g. sight glasses) Suitable for Chemical industry Food industry Maintenance Approvals DIN 28090-2 TA Luft 1,5 · 10 -8 mbar · l/(s·m) @ 250 °C FDA conformity EG 1935:2004 EU 10/2011 Form of delivery Sheet dimension: 1,000 x 1,100 mm and 1,500 x 1,500 mm Sheet gaskets thicknesses: 0.5 / 1.0 / 1.5  / 2.0  / 3.0  / 4.0 / 5.0...

Sheet gasket from expanded graphite with multilayer stainless steel foil reinforcement Characteristics Premium graphite gasket, reinforced by 0.05 mm multilayer stainless steel carriers in an adhesive free sandwich compound with the graphite layers. Purity 99.8 % High blow out safety and mechanical strength Practically no cold flow or creep under temperature Non hardening Excellent in use at cycling temperatures Reduced Emissions due to high sealability Built in safety against assembly and operational problems. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 250 bar Main application Highly recognised as problem solving gasket material in all industries with higher pressures and temperatures and the demand on operation safety and sealability Suitable for In all industries Approvals BAM DVGW TA Luft FIRE SAFE API 607 Variant Economic grade alternative D 5.3 with multiple 0.05 mm stainless steel foil...

High Temperature Gasket of Expanded Flexible Graphite with Stretchmetal Characteristics Expanded graphite sheet gasket with Stainless Steel stretch metal reinforcement and a purity of 99 %. Practically no cold flow or creep under temperature. Non hardening Excellent in use with cycling temperatures. Blow out safe due to 3 dimensional reinforcement matrixes Optimized transfer of sealing stress Safe use even with small sealing width Minimized risk of separation known from multilayer reinforced gasket sheets. Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C, n oxidizing atmosphere +450 °C Pressure: p = 200 bar Main application Universal use as problem solver in all industries when demanding higher operation safety and sealability especially in older plant equipment. Suitable for Chemical industry Petrochemical plants Pharmaceutical industry Power plant technology Paper industry Sugar industry Approvals DVGW BAM TA Luft FIRE SAFE API 607 on request Form of...

Modified PTFE reinforced with special silica filler Characteristics Protected against cold flow Excellent recovery Very good in applications with varying temperatures Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness FAWN 05 / 0.5 mm FAWN 10 / 1.0 mm FAWN 15 / 1.5 mm FAWN 20 / 2.0 mm FAWN 30 / 3.0 mm Main application Steel or other metal flanges on pipework Vessel Container Reactors in higher temperature applications. Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards, special dimensions on request.

Static, Sintered PTFE Sheet Gaskets Characteristics Microcellular structured PTFE filled with hollow glass microspheres High sealability even at low gasket stress Minimized cold flow Very good recovery High compressibility and adaptability even at slightly damaged flanges Technical parameters Temperature: t = -180 … +230 °C Pressure: p = 55 bar Article code / Thickness BLUE 05 / 0.5 mm BLUE 08 / 0.8 mm BLUE 10 / 1.0 mm BLUE 15 / 1.5 mm BLUE 20 / 2.0 mm BLUE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Universally on all tension sensitive equipment flanges. Suitable for Chemical industry Pharmaceutical industry Food industry Approvals DVGW TA Luft FDA EG 1935:2004, EU 10/2011 FDA Variant D3.1 Modified PTFE: Reduced deformation under pressure, better resilience under varying pressure, reduced thermal expansion coefficient (approx. 50 %) D3.2 Glas: Improved compression strength due to glas fiber...

Expanded natural Graphite in Purity 98 % – industrial grade or 99.85 % nuclear grade (chlorine content < 20 ppm) Temperature in steam Density min. 1.40 g/cm 3 Characteristics High cross section density Self lubrication and limited wear Dry running capability Coefficient of thermal expansion similar to steel Maintenance free and elastic, also under variable pressure Non ageing, high chemical resistance Attention! Precise tolerances and surfaces of application are requeste Operating range Pressure [p max]: 800 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.80 g/cm³ Temperature in steam Density min. 1.40 g/cm 3 Main application Fittings Pumps (high temperature) Covers Valves Suitable for Valves and fittings of all Industries Approvals Oxygen BAM 200 °C/250 bar DVGW and KTW Variant Rings with integrated reinforcement or endcaps made from ANSI 316 Special quality TA Luft 300 with a leakage rate of 5.7 · 10 -3 mbar · l/(s·m) 300 °C Form of delivery ARF rings - endless,...

100 % virgin PTFE, modified and filled with Barium sulfate Characteristics Protected against cold flow Excellent recovery Excellent chemical resistance in caustic applications Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness WHITE 08 / 0.8 mm WHITE 10 / 1.0 mm WHITE 15 / 1.5 mm WHITE 20 / 2.0 mm WHITE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.8/1.0/1.5/2.0/3.0 mm or cut gaskets according to drawing or EN and international Standards, special dimensions on request.

In many incineration and industrial plants in various industries as well as in the municipal sector, dust emissions are produced during production processes. These emissions must be purified before they are released into the atmosphere. The dusts can be sticky, greasy, wet, dry or combustible and have different particle sizes. In general, they are between 0,1 and 1000 μm in size. Dust collection systems physically filter these dusts out of the exhaust air. WesselUmwelttechnik specialises in various methods of exhaust air cleaning, including industrial dust collector systems, to safely comply with legal requirements, e.g. the German TA Luft. In addition to dry filtering, the product range includes wet separators. This way, even humid and hot exhaust air as well as agglomerating dusts can be treated by the Wessel systems. The various exhaust air purification technologies allow the use of dust collecting systems in a wide variety of industries.

Efficient administrative processes and safe operation of systems More than 50 years of trust from energy suppliers, industrial companies and public sector organisations We help our customers to master the challenges of digital change. We develop the strategies, the technologies and the modern design for information systems in order to be able to implement the demanding ideas of our customers. The professional know-how of our experts enables the proper, effective and secure solution of a wide range of tasks. A comprehensive range of services and provision of information technology Process Information Systems Environmental information and authority systems Emission monitoring systems according to BImSchV, TA-Luft Condition monitoring systems, for example for vibration monitoring Customized database systems

Corrugated ring seals with soft material overlays, mostly made of graphite or PTFE, exhibit very high tightness combined with minimum creep (loss of bolt force). This combination of outstanding properties makes corrugated ring seals ideal for refineries, chemical and petrochemical plants. ✔ Characteristic values according to EN 13555 ✔ TA Luft according to VDI 2440 ✔ Fire Safe according to ISO 10497 / API 607 ✔ Blowout test according to VDI 2200 ✔ BAM for oxygen applications