Data - Import export

The remote data transmission unit ARC1-Box-SB with logger function is equipped with safety barriers and, in combination with intrinsically safe transmitters, it is suitable for use in hazardous applications. The unit is encased in a robust, water-tight aluminium housing. It records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.

The remote data transmission unit ARC1-Box with logger function is encased in a robust, water-tight aluminium housing. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.

The remote data transmission unit ARC1-Tube with logger function is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.

The remote data transmission unit ADT1-Box is encased in a robust, water-tight plastic housing. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.

The remote data transmission unit ADT1-Tube is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.

Windows software for reading off and configuring data loggers. The measurement data can be displayed in graph form or exported. Air pressure compensation can also be carried out on the data, or it can be converted into water level values. The online function shows the current value of the device.

The series 21DC RFID combines the digital and extremely robust D-line pressure transmitters and data logger electronics with an RFID interface. The built-in battery has a lifespan of 5 to 10 years. The pressure and temperature values are each saved as a pair of numbers in the memory. Instantaneous values and saved data can still be read if the battery is flat, because power is supplied by the reader.

The LEO5 digital manometers combine a range of functions from other KELLER manometers in a water-tight stainless steel housing. They can detect pressure peaks with a measurement interval of 5 kHz and record all measurements. Current measured values and saved data can be read out via the USB connection. The pressure values can be shown on the extra-large display in a wide range of units of pressure, which are either pre-programmed or configured by the user.

The high-accuracy LEO-Record digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery.

The DCX-22AA-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. They compensate for the air pressure using an additional, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The DCX-22-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. The integrated Pt1000 achieves an accuracy of ±0,1 °C, and the conductivity can be measured at ± 2,5% of the selected range (0,2 / 2 / 20 / 200 mS/cm). Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The DCX-38 data loggers are designed for water level measurements with a high resolution in the mbar range. They can detect water levels with a total error band of just 1 mm (measuring range 0,5 m water column, compensated temperature range -10...40 °C). Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, converted into fill levels or other units, and exported.

The DCX-25PVDF data loggers have been specially designed for use in aggressive liquids such as brackish water and sewage. The housing is made of polyvinylidene fluoride and the installed pressure transducer is available in Hastelloy C-276 or titanium 6AL-4V. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The DCX-16 data loggers have a diameter of just 16 mm and can be used in tight spaces. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The low-cost data loggers of the DCX-18-ECO series have a rechargeable battery encased in a fully welded steel housing. The configuration software supplied (measurement interval, incident management, delayed measurement start etc.) also makes it easy to display data that has been read in a graph or chart, correct it using air pressure values, convert it into fill levels or other units, and export it.

The DCX-22AA data loggers compensate for changes in air pressure by means of a separate, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The DCX-22 data loggers achieve greater measurement accuracy than loggers with a smaller diameter. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The data logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

The Audio Alert Detector converts analog audio alarms on WDP sources into events and transmits them within the WEYTEC KVM system. For example, an acoustic signal can be heard and a visual indication appears on predefined smartTOUCH keyboards and their displays. An overview page documents the status and acknowledgement phase of alarms from individual systems. Alarms and video signals from the relevant computers can also be visualized on a monitor and a video wall, or forwarded to an external system. At a glance Supports all sources with an analog audio output (3.5 mm jack) Hardwarebased No software installations required on sources Acoustic and visual indication in the KVM system Compact design Compatible and integrated with WEYTEC KVM products and solutions

A variety of external analog and digital input devices can be integrated in a KVM solution using a Converter Analog to USB. The Converter Analog to USB converts outputs from analog and digital throttles, steering wheels and buttons to USB signals. Thus, the Converter Analog to USB can be used when relocating workstations to a centralized system room and extending the control signals of a variety of devices. It is fully compatible with the WEYTEC distributionPLATFORM. At a glance Convert analog joystick signals to USB Also supports digital input signals (e.g. buttons) Map to X, Y and ZAxis or joystick buttons Compact and modular design, appropriate for high density installations Compatible with all other IP Remote products Fully compatible with the WEYTEC distributionPLATFORM (WDP)

The IP Remote Audio Mixer combines up to 16 digital and 2 analog audio signals into one mix. The resulting IP Remote audio stream is available across the network as an input to multiple KVM receivers, a smartTOUCH console or additional audio mixers combining additional source signals. The audio stream is also available as an analog signal on the card‘s lineout interface, where it can be directly connected to speakers or headphones. At a glance Mixes IP Remote audio signals and analog audio inputs Full integration with WDP Perfect addition to smartTOUCH keyboards supporting more than 4 audio channels Digital output as IP Remote audio signal Analog output via line out interface Volume control and left/right channels adjustable for each signal Can be installed at the desk, in the system room or wherever playback is required Compatible and integrated with WEYTEC products and solutions

The WEYTEC IP Input / Output (IP I/O) cards receive, distribute and forward events within a WEYTEC KVM matrix system. IP I/O cards provide interfaces between WEYTEC IP devices and third party peripherals. In combination with a smartTOUCH keyboard or a WDP system, IP I/O cards detect incoming events and trigger outgoing events, interacting with visualization solutions, communication and radio systems, building management technology and more. At a glance Four switchable relays (IP I/O Relay card) Four optocouplers (Input card) Four serial interfaces (RS232 card) Compatible and integrated with WEYTEC products and solutions

WEYTEC IP Grabber Cards capture video and audio content as well as keyboard and mouse interactions. The data is converted to IP streams which are recorded over standard network infrastructure. The IP Grabber cards are deployed in between the source and the input or output device, and can be installed either at the source (in the system room) or at the desk. They do not interfere with existing hardware or software. At a glance KVM recording of keyboard, video, mouse, audio and serial data streams Hardwarebased, no software installations Video Grabber available with DVI (VGA) and DisplayPort Data Grabber supporting PS2 & USB or serial & audio Video resolutions up to 4K@60Hz Digital transmission (standard IP) Interface modules for copper and fiber networks Lossless encoding technology

The smartVISUAL Receiver is the basis of WEYTEC‘s visualization solutions. Together with smartVISUAL master, they administer and control real and virtual video walls as well as decode and display video streams. smartVISUAL integrates separate displays into a continuous visualization surface. At a glance Resolutions up to 4K @60Hz Hardwarebased, without software installations Independent of operating system Video sources can be displayed in freely scalable windows on screens and video walls Unlimited number of sources and screens Redundant configuration Compatible and integrated with WEYTEC switchingPLATFORM, WEYTEC distributionPLATFORM and WEYTEC visualizationPLATFORM

The smartVISUAL Master is the basis of WEYTEC‘s visualization solutions. Together with smartVISUAL receiver, they administer and control real and virtual video walls as well as decode and display video streams. smartVISUAL integrates separate displays into a continuous visualization surface. At a glance Resolutions up to 4K @60Hz Hardwarebased, without software installations Independent of operating system Video sources can be displayed in freely scalable windows on screens and video walls Unlimited number of sources and screens Redundant configuration Compatible and integrated with WEYTEC switchingPLATFORM, WEYTEC distributionPLATFORM and WEYTEC visualizationPLATFORM

The ultraFLEX Mini PC is a compact and efficient mini PC that is built for 24/7 operations. It can be installed at the workplace or in the system room. It is capable of driving two to seven screens and features a full range of interfaces. The ultraFLEX Mini PC provides maximum power with a minimum footprint. At a glance Green IT Extremely low noise and heat emissions Supports up to seven screens and 5K resolutions Flexible and individual CPU, RAM and SSD configurations Redundant power supplies (optional)

WEYTEC IP Remote USB provides a transparent USB channel for devices such as hard disks, flash drives, fingerprint and card readers, audio devices, webcams and more. In combination with a WEYTEC distributionPLATFORM, USB connections can be switched between desks and PCs. At a glance Extend any USB device over standard IP networks Transparent USB (no drivers required) USB 2.0 HiSpeed Switchable, in combination with a WEYTEC distributionPLATFORM (WDP) Can be integrated into existing WEYTEC systems Works across multiple sites / network segments Builtin to WEYTEC KVM chassis and/or boxes

The WDP Server is the central controller of KVM Matrix solutions. It is responsible for all user interactions, from login and role selection to logoff. It manages the switching, control and surveillance of all devices within a WDP system. Designed for 24/7 operations, multiple physical WDP servers (Primary, Standby and DB+Console) work in failsafe mode and are each equipped with redundant power supplies. At a glance Central creation and management of user profiles, user groups, roles and access rights, whereby any user can login and access their sources from any desk Central administrative access for configuration and monitoring across the entire KVM system Switching and control of IP Remote transmitters, receivers and smartTOUCH keyboards Stores all information about user rights, devices and switching options in a database, ensuring data integrity Logs all user activity incl. logins/logouts & access to sources Locationbased device management across multiple sites

The USB Deskswitch is a KVM switch that enables users to control all the computers at their desk using a single keyboard and mouse. Operators and traders enjoy a fullyintegrated environment with intuitive switching between different sources by moving the mouse cursor across the border of a screen. Add extra functionality with valueadded Network CopyPaste software. At a glance Up to 4 PCs with a single USB Deskswitch Up to 16 PCs with multiple Deskswitches Individual hotkeys for different sources Mouse switching with multiresolution support (no software required for singlescreen sources) Network CopyPaste to share clipboard information between PCs in the same network (optional) Access USB 3.0 devices from up to 4 PCs

WEYTEC KVM over IP solutions house all your PCs and information sources in a centralized server room where they are stored, protected, cooled costeffectively, and maintained easily and efficiently. This saves electricity, increases the average life span of hardware, precludes breeches of IT security and virtually eliminates expensive moves, adds and changes. In case of a PC failure, users can switch instantly to a spare device. KVM over IP solutions enhance workflow efficiency, workplace ergonomics and IT security. At a glance Remote dedicated, shared and switched PCs Digital transmission, standard IP Available with DVI (VGA) and DisplayPort Video resolutions up to 2x 5K@60Hz or 1x 8K@60Hz Transparent USB 2.0 Dual channel stereo audio Data transmission over copper and/or fiber with corresponding SFPs Increased rack density with dual transmitters and receivers Universally applicable for all hardware platforms No distance limitations