Results for
KELLER PRESSURE
Switzerland
The series 23-Ed pressure transmitters are designed for industrial applications and are based on the highly stable pressure transducers of the 10L series and a fully analog circuit. Thanks to its modular concept, this series can be flexibly adapted to customer-specific pressure connections and connector plugs. Pressure-proof housing – suitable for use in explosive atmospheres.
Request for a quoteKELLER PRESSURE
Switzerland
The miniature pressure transducer M5 takes its name from the fine M5 thread at the sensor head that makes it possible to take measurements in places which are difficult to access and in narrow pipelines. Together with its ability to measure media at temperatures of up to 180 °C in a dynamic range from 0 to 50 kHz, this makes it ideally suited to measurements on engine test benches.
Request for a quoteKELLER PRESSURE
Switzerland
These low-cost miniature pressure transducers have been specially developed for very rapid hydrodynamic and aerodynamic in situ pressure measurements. The 2Mi sensors are available in a variety of housing designs and can simply be stuck on at the desired location. Despite its miniature design, the sensor chip is protected against external influences by a steel housing and a silicone elastomer coating. It can also be used in liquids.
Request for a quoteKELLER PRESSURE
Switzerland
The capacitive pressure transmitters of the 41X series are designed for measuring relative pressure values in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output.
Request for a quoteKELLER PRESSURE
Switzerland
The pressure transmitters of the 22M series with brass housing were designed to be a reliable solution for automotive and industrial applications. They are homologated and can be used, for instance, to measure the content of the gas tank in bivalent vehicles.
Request for a quoteKELLER PRESSURE
Switzerland
The capacitive pressure transmitters of the 41X-Ei series are designed for measuring relative pressure values in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output. Intrinsically safe – suitable for use in explosive atmospheres.
Request for a quoteKELLER PRESSURE
Switzerland
The pressure transmitters of the 4LD series use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Request for a quoteKELLER PRESSURE
Switzerland
The pressure transmitters of the 7LHPD series for high pressure applications use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions.
Request for a quoteKELLER PRESSURE
Switzerland
The HPX high-pressure calibrator is a high-precision calibration instrument for pressures between 0 bar and 700 bar. The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and is both shown on the display and output via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.
Request for a quoteKELLER PRESSURE
Switzerland
The MPX pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 25 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and is both shown on the display and output via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.
Request for a quoteKELLER PRESSURE
Switzerland
The LPX low-pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 10 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and output both on the display and via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.
Request for a quoteKELLER PRESSURE
Switzerland
The compact pressure transponders consist of a digital, extremely robust D-line pressure transmitter and a passive RFID module. They obtain their power from the reader and therefore do not require a power connection or battery replacement. The 21D RFID transponders are therefore perfect for convenient on-side reading of instantaneous values, e.g. during inspection tours or safety checks on large vehicles.
Request for a quoteKELLER PRESSURE
Switzerland
The remote data transmission unit ARC1-Box-SB with logger function is equipped with safety barriers and, in combination with intrinsically safe transmitters, it is suitable for use in hazardous applications. The unit is encased in a robust, water-tight aluminium housing. It records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.
Request for a quoteKELLER PRESSURE
Switzerland
The remote data transmission unit ARC1-Box with logger function is encased in a robust, water-tight aluminium housing. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.
Request for a quoteKELLER PRESSURE
Switzerland
The remote data transmission unit ARC1-Tube with logger function is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. This unit records measurements made by external sensors (e.g. a level sensor) and periodically transmits the collected data via 2G, 3G, 4G or LoRaWAN. The high-performance battery and sophisticated power management enable autonomous operation for up to 10 years. KELLER provides a range of licence-free software solutions for configuration and data processing. The easiest and most convenient way to access the collected data is via KOLIBRI Cloud.
Request for a quoteKELLER PRESSURE
Switzerland
The remote data transmission unit ADT1-Box is encased in a robust, water-tight plastic housing. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.
Request for a quoteKELLER PRESSURE
Switzerland
The remote data transmission unit ADT1-Tube is encased in a robust, stainless steel housing, which is ideally suited to installation in 2" monitoring pipes. The LoRa module, which can be configured on a country-specific basis, establishes a connection with the Internet and makes it possible to collect measurement data in a low-cost and energy-saving manner. These autonomous devices can be linked with digital level sensors and pressure transmitters in the KELLER D and X product lines. With three conventional, high-quality AA batteries, the system can operate autonomously for up to 5 years. The LoRaWAN provider can be selected freely or an in-house or open source infrastructure and associated services can be used. The easiest and most convenient way to access the collected data at the end of the transmission chain is via KOLIBRI Cloud from KELLER.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KELLER PRESSURE
Switzerland
The DCX-22AA-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. They compensate for the air pressure using an additional, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Request for a quoteKELLER PRESSURE
Switzerland
The DCX-22-CTD data loggers measure conductivity and temperature as well as pressure, along with the depth of bodies of water. The integrated Pt1000 achieves an accuracy of ±0,1 °C, and the conductivity can be measured at ± 2,5% of the selected range (0,2 / 2 / 20 / 200 mS/cm). Thanks to their long-life battery, they can keep recording measurement results for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Request for a quoteKELLER PRESSURE
Switzerland
The DCX-38 data loggers are designed for water level measurements with a high resolution in the mbar range. They can detect water levels with a total error band of just 1 mm (measuring range 0,5 m water column, compensated temperature range -10...40 °C). Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, converted into fill levels or other units, and exported.
Request for a quoteKELLER PRESSURE
Switzerland
The DCX-25PVDF data loggers have been specially designed for use in aggressive liquids such as brackish water and sewage. The housing is made of polyvinylidene fluoride and the installed pressure transducer is available in Hastelloy C-276 or titanium 6AL-4V. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Request for a quoteKELLER PRESSURE
Switzerland
The DCX-16 data loggers have a diameter of just 16 mm and can be used in tight spaces. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Request for a quoteKELLER PRESSURE
Switzerland
The low-cost data loggers of the DCX-18-ECO series have a rechargeable battery encased in a fully welded steel housing. The configuration software supplied (measurement interval, incident management, delayed measurement start etc.) also makes it easy to display data that has been read in a graph or chart, correct it using air pressure values, convert it into fill levels or other units, and export it.
Request for a quoteKELLER PRESSURE
Switzerland
The DCX-22AA data loggers compensate for changes in air pressure by means of a separate, water-tight absolute pressure sensor with a stainless steel separating diaphragm. Unlike gauge pressure systems with a capillary tube, this system is completely resistant to moisture and can therefore be immersed. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Request for a quoteKELLER PRESSURE
Switzerland
The DCX-22 data loggers achieve greater measurement accuracy than loggers with a smaller diameter. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The data logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.
Request for a quoteKELLER PRESSURE
Switzerland
The series 25 pressure transmitters with a front-flush separating diaphragm are designed for industrial applications and are supplied with a G1/2" or G3/4" male pressure port. They are based on a fully analog circuit.
Request for a quoteKELLER PRESSURE
Switzerland
The series 23 pressure transmitters are designed for industrial applications and are based on the highly stable pressure transducers of the 10L series and a fully analog circuit. Thanks to its modular concept, this series can be flexibly adapted to customer-specific pressure connections and connector plugs.
Request for a quoteKELLER PRESSURE
Switzerland
The 9FLD-Ei series is a special version of the 9LD-Ei pressure transmitter. The flanged housing can be mounted using an O-ring or welded on. As with all D-line products, the chip-in-oil technology developed by KELLER is used here, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy.The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres.
Request for a quoteKELLER PRESSURE
Switzerland
The pressure transmitters of the 9LD-Ei series use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres.
Request for a quoteResults for
Instruments - Import exportNumber of results
103 ProductsCountries
Company type