Ph - Import export

Typically, the ASCO CO2 Gas Dosing System is used together with water desalination plants. The system is equipped with a CO2 pressure reducing valve, filtration unit, CO2 gas flowmeter, CO2 regulating valve, pressure gauges, safety valves and a completely prewired control cabinet. In case of maintenance the system provides a manual bypass line, which also can be monitored by the flowmeter. Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required

Probes for process control Probes are available to measure the different process parameters. These values can be displayed on our monitoring instrument and recorded in our bls software, see measure & control. Frequently measured parameters are: temperature pressure stirrer speed torque pH IR probes, probes to control particle sizes etc. from other suppliers can be integrated into our pressure reactors or stirred autoclaves.

Memosens CPS31D is the digital expert for pH compensation in disinfection processes. Its three diaphragms make it suitable for minimum conductivity while its low drift guarantees stable measurement. The sensor makes sure that swimming pool water is agreeable and drinking water tasteful. Thanks to Memosens technology, CPS31D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and facilitates predictive maintenance.

Orbisint CPS11 is the all-rounder for pH measurement in process and environmental applications. It performs reliably and accurately even in highly alkaline media or hazardous areas. Designed for low maintenance and a long operating life, the sensor offers you best value for money.

Orbipac CPF81D is the digital, simple solution for harsh environments. It measures reliably and accurately even in fibrous media and at high flow rates. With its integrated assembly, the electrode saves space and time during flow or immersion installation. Thanks to Memosens digital technology, CPF81D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and facilitates predictive maintenance.

Ceraliquid CPS41D is the digital high performer for harsh chemical applications, media with low conductivity or a considerable content of organic solvents. The sensor is designed for fast response guaranteeing you high process safety even in applications with fast-changing media. Thanks to Memosens digital technology, CPS41D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and facilitates predictive maintenance.

Ceragel CPS71D is the digital specialist for sterile and hygienic applications. Its contamination-resistant gel guarantees stable measurement even in flowing media or low conductivity. The sensor is sterilizable, autoclavable and non-toxic assuring highest safety of your products. Thanks to Memosens digital technology, CPS71D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and simplifies predictive maintenance.

The high-quality CPY20 buffers guarantee pH calibration to ultimate precision. They are produced and bottled in the permanent calibration laboratory that has successfully passed the tough DAkkS accreditation (German accreditation authority). The buffers are specified with an accuracy rating of +/-0.02 pH. They are traceable to NIST and PTB standard reference material and contain only FDA-listed preservatives. Using CPY20 you will achieve correct values that you can rely on.

Liquisys CPM253 is a standard pH/ORP transmitter for all analog and digital Memosens sensors. It improves your operational safety thanks to continuous plausibility, process and sensor checks. Select from numerous hardware and software modules, such as relays or fieldbus communication, to adapt it exactly to your measuring task. This modularity also allows you to upgrade the transmitter at any time. A simple menu and two-point calibration make configuration and operation fast and easy.

Ceramax CPS341D is the long runner for hygienic applications in food and life sciences industries. The sensor guarantees long-term stability and lowest maintenance wherever it is applied. Thanks to Memosens digital sensor technology, CPS341D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and facilitates predictive maintenance.

Keep the pH value of your batch in the optimum range and maximize your product yield with Memosens CPS171D. Thanks to its rugged design and long-term stability, it provides extremely accurate, reproducible and reliable measuring values even after CIP/SIP and autoclaving. With the Memosens digital technology, CPS171D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and simplifies predictive maintenance.

Orbipore CPS91D is the digital specialist for heavily soiled or fibrous media, suspensions, emulsions or precipitation reactions. The open aperture prevents fouling and guarantees you the most reliable measurement under extreme process conditions. Thanks to Memosens digital technology, CPS91D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab calibration and facilitates predictive maintenance.

Liquisys CCM253 is a standard chlorine transmitter with integrated pH compensation for free chlorine. It improves your operational safety thanks to continuous plausibility, process and sensor checks. Select from numerous hardware and software modules, such as relays or fieldbus communication, to adapt it exactly to your measuring task. This modularity also allows you to upgrade the transmitter at any time. A simple menu and calibration make configuration and operation fast and easy.

Liquiline CM14 is a basic transmitter that offers all that you need to run a standard measuring point. It fits in the common cabinet cut-outs and is easy to commission thanks to Memosens digital technology. The Memosens hot plug and play concept allows you to quickly install and configure your digital pH/ORP, conductivity or dissolved oxygen sensors. Liquiline CM14 is compact, easy-to-operate, and cost efficient.

Memosens CPS47D is the digital high performer with liquid KCl reference for media with low conductivity or high organic solvents content. Designed for fast response, it measures accurately even in applications with fast-changing media. Its unbreakable shaft ensures best product safety. In addition, the Memosens digital technology combines maximum process and data integrity with simple handling. It resists corrosion and moisture, enables lab calibration and facilitates predictive maintenance.

Memosens CPS97D is the specialist for fibrous media or media with a high content of suspended solids such as dispersions, precipitation, emulsions. Its unbreakable shaft ensures a long operating life while the open aperture guarantees reliable measurement under harsh process conditions. In addition, the Memosens digital technology combines maximum process and data integrity with simple handling. It resists corrosion and moisture, enables lab calibration and facilitates predictive maintenance.

Memosens CPS77D is the digital specialist for hygienic applications. Its bacteria-proof reference with contamination-resistant gel guarantees stable measurements. The sensor is sterilizable with hot steam, autoclavable and features an unbreakable PEEK shaft assuring highest product safety. In addition, the Memosens digital technology combines maximum process and data integrity with simple handling. It resists corrosion and moisture, enables lab calibration and facilitates predictive maintenance.

The GMP-compliant, compact Belimed Life Science Pharma cleaning system was specially developed for the preparation, cleaning and drying of components in contact with the product for the production of drugs or experiments in laboratories. The washer characterized by an uncompromising hygienic design, simple operation and low-maintenance construction. The design of the pharmaceutical cleaning system and the cleaning processes have been optimized for the highest demands based on many years of experience.

Extensive practical experience and close cooperation with customers and planners show us that less and less space is available for cleaning. In response to this fact we have designed the WD 390 PH with space-saving, shorter cleaning and drying cabins and shorter machine infeed and discharge distances. The WD 390 PH with its cleaning and drying cabins enables short washing cycles and at the same time a higher throughput of washed goods. The Modular Concept The WD 390 PH is equipped with five compact cabins that perform various functions such as cleaning, rinsing and drying in short wash cycles, enabling efficient cleaning and high throughput. In addition, the WD 390 PH offers access for maintenance and service from only one long side, as all units are arranged for easy servicing.

Designed as a cleaning system for containers, drums, pallets and other large-sized vessels, the PH 880.2 is part of an extensive model range (PH 820.2, PH 840.2 and PH 860.2). The tailored operational sequences for professional pharmaceutical processes maximises efficient throughput. Based on standardised technical design and years of Belimed Life Science’s experience in automatic cleaning, the PH washer range covers a wide range of cleaning requirements and features harmonised construction characteristics throughout the various models. The PH 880.2 combines highest possible component standardisation with the necessary design flexibility to achieve best possible adaptation of the machine to the requirements of the production process.

DVM HPHT ultra high accuracy all-in-one density meter and viscometer in-line, online, real-time high-pressure high-temperature viscosity & density tracking Simultaneous density, viscosity and temperature measurement Measure at reservoir conditions: 30,000 psi and 400°F (2000 bar and 200° C) Built for on the bench or in the field use Extremely accurate measurement in the harshest of conditions 5 minutes from box to operation in your flow loop – built to integrate with all PVT systems Full Titanium Grade 5 construction Widely used in oil reservoir PVT analysis HPHT Lubrication testing and formulation

Compact form-factor for simple installation Real-time, stable, repeatable and reproducible measurements in Newtonian & non-Newtonian fluids Track viscosity change over wide range with one sensor All metal (316L Stainless Steel) construction Completely insensitive to mounting conditions Built in fluid temperature measurement Operational to 7500 psi (500 bar) and 575°F (300°C) Threaded, flanged and sanitary process fittings Easy to clean, no maintenance or re-configurations needed for scaling across the factory