Spindles - Import export

The arrangement of two oscillating heads working in opposite directions results in an unusually light construction for a resonance testing machine with a nominal load of 500 kN. With the double spindle arrangement, the overall height could also be kept relatively low. The clamping length is adapted to the customer's needs by means of spindle extensions.

The lifting column for industrial and assembly tables The lifting column SQ consists of a colorless anodized aluminium profile with a cross-section 45x45 mm. The stainless steel tube is guided in a plastic bushing and is moved by a spindle drive. Up to four lifting columns can be connected to a control box and operated synchronously. There are T-slots on 2 sides of the leg (width 8mm). These allow the mounting of crossbars and attachments along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

Slim and compact The leg SM consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each leg has an internal motor that drives the threaded spindles. Up to 3 spindle Lifting legs can be connected to one control box and are operated synchronous. The T-slots on 3 sides (width 8 mm) allow the addition of crossbars, shelves, attachments and mountings along the entire length of the leg. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

For spindle driven workplaces and tables Set up ergonomic workplaces for diffrent areas with the elegant spindle lifting column SL. It is used for assembly tables, in assembly systems, for mechanical engineering, height adjustable beds and massage tables. The column SL consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each column has an internal motor that drives the threaded spindles. These are driven synchronously by the control unit. The T-slots on 3 sides (width 8 mm) allow the connection of crossbars, shelves, attachments and mountings along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

High loads with small dimension The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35x35 mm (SLA) or 45x45 mm (SLG). Up to 4 linear units can be connected to one control box and are operated synchronous with a hand switch. The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35x35 mm and 45x45 mm fit perfectly in steel profiles 40x40 mm or 50x50 mm, which are often used as carriers and legs for work stations. Compared to to the linear unit SLA, the SLG can withstand higher bending moments and is more stable. We recommend the SLA and SLG linear unit for industry, furniture and catering. The following accessories are available: mounting plates adjustable rubber foots aluminum feet castors tube fitting (only for SLA)

When that extra dose of torque is necessary. Our planetary, spur and special gearheads perfectly compliment our motors. When performance is required at high torque levels and correspondingly low speeds, maxon precision gearheads are in their element. In addition to a wide standard range of spur and planetary gearheads, maxon motor also excels in providing customized solutions, tailored to the customer's requirements. Cutting-edge materials and manufacturing processes are used (e.g. CIM/MIM). The gearheads are adapted to the desired motors on site in the supplying plant, further improving the gearhead performance. maxon spur gearheads Spur gearheads are suitable for low torques. The gearheads consist of one or more stages. One stage represents the pairing of two cogwheels. The first toothed gear (pinion) is mounted directly on the motor shaft. The bearing of the output shaft is usually made of sintered materials. Attractively priced Output torque of up to 2 Nm Reduction ratio of 6:1 to 5752:1 Low noise level High efficiency maxon planetary gearhead Planetary gearheads are suitable for transferring high torque. The larger gearheads are normally equipped with ball bearings at the gearhead output. Torque up to 180 Nm Reduction ratio of 4:1 to 6285:1 High power in a small space maxon Koaxdrive The quiet maxon Koaxdrive gearhead combines worm and planetary gearheads. The signature characteristic of the drive is its unusually quiet running, even under heavy loads. Quiet High reduction ratio in the first stage Combined with maxon EC motors, ideal for medical technology. maxon spindle drive Spindle drives transfer the power generated by the motor into linear feed rate and feed force. The output shaft's bearings can absorb highest axial loads. Compact design due to direct integration of the spindle Comprises planetary gearhead with radial and axial bearings Designed for high forces and linear feed rates Wide range of spindles to suite any applicationWith integrated axial bearing for high axial loads: metric spindles, ball screws and trapezoidal screws are available.

When that extra dose of torque is necessary. Our planetary, spur and special gearheads perfectly compliment our motors. When performance is required at high torque levels and correspondingly low speeds, maxon precision gearheads are in their element. In addition to a wide standard range of spur and planetary gearheads, maxon motor also excels in providing customized solutions, tailored to the customer's requirements. Cutting-edge materials and manufacturing processes are used (e.g. CIM/MIM). The gearheads are adapted to the desired motors on site in the supplying plant, further improving the gearhead performance. maxon spur gearheads Spur gearheads are suitable for low torques. The gearheads consist of one or more stages. One stage represents the pairing of two cogwheels. The first toothed gear (pinion) is mounted directly on the motor shaft. The bearing of the output shaft is usually made of sintered materials. Attractively priced Output torque of up to 2 Nm Reduction ratio of 6:1 to 5752:1 Low noise level High efficiency maxon planetary gearhead Planetary gearheads are suitable for transferring high torque. The larger gearheads are normally equipped with ball bearings at the gearhead output. Torque up to 180 Nm Reduction ratio of 4:1 to 6285:1 High power in a small space maxon Koaxdrive The quiet maxon Koaxdrive gearhead combines worm and planetary gearheads. The signature characteristic of the drive is its unusually quiet running, even under heavy loads. Quiet High reduction ratio in the first stage Combined with maxon EC motors, ideal for medical technology. maxon spindle drive Spindle drives transfer the power generated by the motor into linear feed rate and feed force. The output shaft's bearings can absorb highest axial loads. Compact design due to direct integration of the spindle Comprises planetary gearhead with radial and axial bearings Designed for high forces and linear feed rates Wide range of spindles to suite any applicationWith integrated axial bearing for high axial loads: metric spindles, ball screws and trapezoidal screws are available.

Compact, easily configurable spindle drives as complete systems. With integrated ball bearings for high axial loads. Versions with metric ceramic or metal spindle. Custom lengths and special flange nuts available on request.

Compact, easily configurable spindle drives as complete systems. With integrated ball bearings for high axial loads. Versions with metric ceramic or metal spindle. Custom lengths and special flange nuts available on request.

Compact, easily configurable spindle drives as complete systems. With integrated ball bearings for high axial loads. Versions with metric ceramic or metal spindle. Custom lengths and special flange nuts available on request.

Compact, easily configurable spindle drives as complete systems. With integrated ball bearings for high axial loads. Versions with metric ceramic or metal spindle. Custom lengths and special flange nuts available on request.

Compact, easily configurable spindle drives as complete systems. With integrated ball bearings for high axial loads. Versions with metric ceramic or metal spindle. Custom lengths and special flange nuts available on request.