Points - Import export

The IST AG P14 2FW Thermo was designed especially for dew point applications and humidity generators. The favorable one-chip solution consists of a capacitive humidity sensor, based on the standard P14 sensor, together with a heating element, which, at the same time, works as a valid Pt100 sensor. The sensor achieves outstanding measurement accuracy due to the optimal thermal coupling which enables a fast recovery time. Due to heating from the Pt100, humidity is quickly released and enables fast re-measurements after condensation. Furthermore, the Pt100 sensor heats out gases or vapors from the polymer, which might cause a drift of the humidity signal. The P14 2FW Thermo humidity sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +85 °C) with a capacitance of 150 pF ±50 pF (at 30 % RH and +23 °C) and operates within a temperature range of -50 °C to +150 °C.

Mechanically robust and with a chemical and condensed waterproof sensing area, the digital IST AG HYT humidity modules offer a wide application window and an optimal price-performance ratio. Precisely calibrated, the HYT modules deliver an outstanding accuracy and excellent long-term stability even at high humidity - ideal for sophisticated mass applications, industrial handheld devices and precise humidity transmitters. Further advantages of the HYT 939 digital humidity module include: — Calibrated and temperature compensated — Excellent humidity/temperature accuracy and stability — High chemical resistance — I2C protocol (address 0x28 or alternative address) — Wide humidity and temperature range (0 % RH to 100 % RH and -40 °C to +125 °C) — Very low drift — Very stable at high humidity — Interchangeable without adjustments — Pressure-resistant version (up to 16 bar) upon request

The ASCO CO2 Dew Point Tester reliably indicates the dew point (moisture content) of your CO2. This equipment makes it easy to measure the dew point of liquid and gaseous CO2. A laminated, illustrated stepbystep short instruction sheet in A3 format and a detailed instruction manual are supplied with each tester. The ASCO CO2 Dew Point Tester (stainless steel) can be used either wallmounted or freestanding. easy handling no calibration required ready for immediate use for gaseous and liquid CO2

The laser MRC500 is the larger robotic cell that supports point to point laser soldering from above. The standardized platform is based on a flexible and modular concept that can be adapted to a range of processes from fully-automated in-line to stand-alone semi-automated processes. The frame of the laser MRC500 is designed to ensure the safety of the operator during the laser soldering process. Furthermore, it also provides maximum accessibility to the working area. The laser robotic cell is only equipped with mta MLH45 laser head. The main features of our laser MRC500 include: Welded frame construction 3-axis Cartesian robot 500x500mm working area Industrial PC controller with Embedded Windows® operating system Intuitive menu-driven mta MotionEditor software

Precise positioning Mechanical | Pneumatic

Liquiphant FTL51 is a point level switch with extension tube for use in hazardous areas with all international certificates. Useable in all industries. FTL51 offers functional safety SIL2/SIL3. With the second line of defense highest degree of safety and availability of the device can be guaranteed. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.

Soliphant FTM50 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk.

Liquiphant FTL33 is a point level switch for liquids. The FTL33 is especially designed for food & beverage applications where hygienic requirements are requested. The Liquiphant is used for overfill prevention or pump dry-run protection preferably in storage tanks, mixing vessels and pipes.Compact: — Smallest vibronic sensor in the market Safe: — Continuous self-monitoring — Reliable switching independent of media properties Easy: — No calibration or adjustment — Plug & play

Liquiphant FTL81 is a point level switch for use in hazardous areas with all international certificates. FailSafe overfill prevention in applications with functional safety up to SIL3 with one device. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.

The Liquipoint FTW33 is developed and built for the food industry and meets all international hygiene requirements. It is intended for use in applications with pasty and sticky media and media with heavy build-up or where flush-mounting is necessary.Advanced: — Oil and water based fluids and pasty/sticky media — Real flush-mounted Reliable: — Active build-up compensation — Function check with test magnet Easy: — No calibration or adjustment required — Plug & play without any specific tools

Liquiphant FTL31 is a point level switch for liquids. The FTL31 is designed for industrial applications in all industries, mainly the machinery industry. The Liquiphant is used for overfill prevention or pump dry-run protection in cleaning and filter systems as well as in cooling and lubrication vessels.Compact: — Smallest vibronic sensor in the market Safe: — Continuous self-monitoring — Reliable switching independent of media properties Easy: — No calibration or adjustment — Plug & play

The Nivector FTI26 is a cost-efficient point level switch for solids in the food industry and powder applications in all industries. The capacitance device convinces with the best build-up performance in class and a high sensitivity. All industry compliant certificates are available. In addition, the FTI26 is industry 4.0 ready with IO-Link communication.

Available in different variations

The Liquipoint FTW23 is developed and built for the food industry and meets all international hygiene requirements. It is intended for use in applications in liquid media without build-up.Efficient: — Cost effective — Function check with test magnet Easy: — No calibration or adjustment required — Plug & play without any specific tools

The economical Soliswitch FTE20 is a paddle switch for point level detection in bulk materials. Its robust polymer housing and compact design makes it an ideal sensor for full, empty and demand alarm in applications with bulk solids. The optimized polymers make the unit outstandingly robust and therefore suitable for use in dust explosive areas according the latest standards.

The new Liquiphant FTL51 is specialized for the process industry and already developed according to IEC 61508 to be used directly in SIL2 and SIL3 applications without big efforts. You conduct periodic proof tests according to SIL or WHG simply mobile with an intuitive wizard. At the end you receive an automated documentation., Liquiphant measures reliably and is not affected by changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.

The Gammapilot FMG50 compact transmitter is designed for non-contact point level detection, continuous level, interface and density measurement in liquids, solids, suspensions or sludges. As the first true 2-wire loop powered compact transmitter it minimizes engineering and installation efforts.