Results for
BOGRAMA AG
Switzerland
High-performance drum feeder with low feed height for comfortable working. With a capacity of up to 20,000 cycles/h, the TA 20 is also deployed for the small folds of rotary printing sheets.
Request for a quoteBOGRAMA AG
Switzerland
Mobile transfer table for inline configuration of BSR 550 Servo with machines interfaced upstream such as cross cutters and digital printing machines.
Request for a quoteBOGRAMA AG
Switzerland
Mobile transfer unit for inline operation with the BSR 550 Servo rotary die-cutter. For the perfect gripping of die cut products. Fitted with clocked air nozzles for the separation of inner cuts.
Request for a quoteBOGRAMA AG
Switzerland
Simple, cost-effective delivery with fixed height.
Request for a quoteBOGRAMA AG
Switzerland
The SAB 550 / 750 stream delivery is used for multiple-up production. Formats from A3 to 30 x 30 mm (minimum) can therefore be delivered in streams Round belt infeed for optimised product delivery Powered top belts with size-independent stream belt Preselection and total counters Motorised height adjustment Available in two working widths, optionally with stream belt extension to 2 meters.
Request for a quoteBOGRAMA AG
Switzerland
The BSM 750 Servo with integrated front trim lends the booklet its final form. Front trim, head and foot trim, and blank separation are performed in one operation.
Request for a quoteBOGRAMA AG
Switzerland
Where punch force is crucial. Fitted with a high-performance servo drive, capacity rises to 12,500 cycles/h. High punch force for die-cutting (to max. 4 mm) High-performance 5kW servo motor Controllable cutting speed Available in two working widths.
Request for a quoteBOGRAMA AG
Switzerland
"The compact and attractively priced BSR 550 basic is structured as an offline solution. It is designed specifically for users who want to produce small and medium runs economically and efficiently as well as for those for which the flexible connection options and technical features of the BSR 550 Servo have no priority. Individual products are fed to the punching area from the flat pile feeder and punched with the rotating flexibe die. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching cylinder with high precision without stopping. To exchange the flexible dies the entire breakout and deliver unit is disconnected from the die-cutting area. Thus an optimal accessibility is guaranteed. After die-cutting the inner cuts are separated and the section grids deflected.
Request for a quoteBOGRAMA AG
Switzerland
This machine configuration is the most flexible variant. It can not only be combined with downstream but also with upstream equipment such as cross cutters, digital printing machines and folding machines. Products are fed individually to the punching area via register table and rotary punched by using a flexible die. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching cylinder with high precision without stopping. Automatic discharging of section grids and simultaneous separation of inner cuts increase production in addition. The format range of the BSR 550 Servo is from 550 x 750 mm to 210 x 210 mm. Sheets having a product thickness between 0.5 mm and 80 g/m2 can be processed. The maximum capacity of the machine is 12,000 sheets/h.
Request for a quoteBOGRAMA AG
Switzerland
In this configuration variant, products are fed to the punching area individually from the pallet feeder and rotary punched by using a flexible die. The maximum stack height of the feeder is 100 cm. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching cylinder with high precision without stopping. Inline configuration of the die-cutting machine with machines interfaced downstream such as folding machines, mailing systems and packaging machines is the most efficient way of carrying out multiple high-performance steps in one operation. Automatic discharging of section grids and simultaneous separation of inner cuts increase production in addition. The format range of the BSR 550 Servo is from 550 x 750 mm to 210 x 210 mm. Sheets having a product thickness between 0.5 mm and 80 g/m2 can be processed.
Request for a quoteBOGRAMA AG
Switzerland
Individual products are fed to the punching area from the flat pile feeder and punched with the rotating flexibe die. The sheet alignment on the side is performed with a register table with ball rail. The position accuracy in the direction of production is realised with a positioner roller system that causes the sheets to pass the punching punching cylinder with high precision without stopping. Inline configuration of the die-cutting machine with machines interfaced downstream such as folding machines, mailing systems and packaging machines is the most efficient way of carrying out multiple high-performance steps in one operation. Automatic discharging of section grids and simultaneous separation of inner cuts increase production in addition. The format range of the BSR 550 Servo is from 550 x 750 mm to 210 x 210 mm. Sheets having a product thickness between 0.5 mm and 80 g/m2 can be processed. The maximum capacity of the machine is 12,000 sheets/h
Request for a quoteBOGRAMA AG
Switzerland
The most universal and most sold model by far for the mid capacity range to 10,500 cycles/h. Simple operation from touchscreen Integrated controller for infeed hole punching Available in two working widths.
Request for a quoteNOVA WERKE AG - NOVA SWISS
Switzerland
Nova Swiss fittings ensure leak-free screw connections for tube components. They give you the security of using a simple yet reliable screw joint system. Our screw fittings can be installed and removed as often as required. Their faceted edges make handling easier and reduce the risk of injury. All fittings are supplied complete with screw connections.
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic AMP 20 S is the ideal hotformer for the costefficient production of high volumes of steel and brass parts with diameters of up to 38 or 42 mm, with a production rate of up to 200 parts per minute. Main advantages Compact design, Easy to operate, High productivity
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic HM 75 boasts an outstanding concept and is the ideal hotformer for the costefficient production of complex forgings with a diameter of up to 180 mm and an initial weight of up to 7.5 kg. Main advantages Integrated HFE functionality for forwards extruded forgings, Versatile machine kinematics for complex applications, Servohydraulic end stop system for optimal cutoff quality, Lowimpact part discharge reduces the need for remachining, High process reliability thanks to accurate transfer unit with individually monitored grippers
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic HM 35 is the ideal hotformer for the costefficient production of precision forgings with a diameter of up to 75 mm, with a production rate of up to 170 parts per minute. Main advantages Highest productivity in this class, High process reliability, Controlled and lowimpact part discharge, Four forming stations for wide range of applications
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic AMP 509 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 108 mm, with a production rate of up to 100 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic AMP 509 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 108 mm, with a production rate of up to 100 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic AMP 30 S is the ideal hotformer for mediumsized forgings with a diameter of up to 67 mm, with a production rate of up to 140 parts per minute. Main advantages Reliable and durable design, Wide range of uses, Smooth part discharge, High process reliability thanks to servoinfeed and electronic bar end elimination device (ESA 600), Power Failure Protection for high machine safety even during power failures
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The HOTmatic AMP 20 N is the ideal hotformer for the costefficient production of forged cam lobes and other challenging forgings with a diameter of up to 48 mm, with a production rate of up to 200 parts per minute. Main advantages High productivity, Lowimpact part discharge, Precise 4roller servoinfeed for challenging parts, Easy to operate
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The COLDmatic CM 45eco is the ideal coldformer for accurate and complex parts from wire, with a production rate of up to 160 parts per minute. It boasts short commissioning times and has a compact design so it takes up less space. Main advantages Easy to operate, Separate lubricant and coolant circuit for maximum tool service life, Very high cutting quality, Accurate parts transport, Versatile kinematics, Optional equipment with heating system, Short commissioning times
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The COLDmatic CM 625 is the ideal coldformer for accurate and complex parts from wire, with a production rate of up to 180 parts per minute. It boasts maximum cutoff quality and userfriendly servo technology in the infeed and transfer unit. Main advantages Short retooling times thanks to innovative servo technology, Easy to operate, Separate lubricant and coolant circuit for maximum tool service life, Very high cutoff quality, Accurate servo linear infeed without bar stop, for defectfree cutoff surfaces, Accurate servo transfer unit for safe part transport, Versatile kinematics, Optional equipment with heating system
Request for a quoteHATEBUR UMFORMMASCHINEN AG
Switzerland
The COLDmatic CM 725 is the ideal coldformer for accurate and complex parts from wire, with a production rate of up to 180 parts per minute. It boasts maximum cutoff quality and userfriendly servo technology in the infeed and transfer unit. Main advantages Short retooling times thanks to innovative servo technology, Easy to operate, Separate lubricant and coolant circuit for maximum tool service life, Very high cutoff quality, Accurate servo linear infeed without bar stop, for defectfree cutoff surfaces, Accurate servo transfer unit for safe part transport, Versatile kinematics, Optional equipment with heating system
Request for a quoteSTL SYSTEMS AG
Switzerland
The MD900 is an inductive metal detector for use in garbage sorting. It consists of a high-frequency field generator and a series of probes running transversely to the treadmill, which analyzes the product stream in a location-specific and location-resolved manner. The data for the opening and closing of the valves, which are transmitted in real time via an SPI interface to the valve control in the blowout unit, are calculated. Operation is via an Ethernet interface. All data for configuration during operation (operating mode, sorting program and other parameters) are transmitted via the Modbus / UDP protocol. For updates and error analysis, an independent TCP/IP interface is available. The sensor is connected via 2 connection cables to the blow-out unit.
Request for a quoteResults for
Metal in - Import exportNumber of results
28 ProductsCountries
Company type